Solid phase extraction and preconcentration of uranium(VI) and thorium(IV) on Duolite XAD761 prior to their inductively coupled plasma mass spectrometric determination

A simple and effective method is presented for the separation and preconcentration of thorium(IV) and uranium(VI) by solid phase extraction on Duolite XAD761 adsorption resin. Thorium(IV) and uranium(VI) 9-phenyl-3-fluorone chelates are formed and adsorbed onto the Duolite XAD761. Thorium(IV) and uranium(VI) are quantitatively eluted with 2 mol L⁻¹ HCl and determined by inductively coupled plasma-mass spectrometry (ICP-MS). The influences of analytical parameters including pH, amount of reagents, amount of Duolite XAD761 and sample volume, etc. were investigated on the recovery of analyte ions. The interference of a large number of anions and cations has been studied and the optimized conditions developed have been utilized for the trace determination of uranium and thorium. A preconcentration factor of 30 for uranium and thorium was achieved. The relative standard deviation (N = 10) was 2.3% for uranium and 4.5% for thorium ions for 10 replicate determinations in the solution containing 0.5 μg of uranium and thorium. The three sigma detection limits (N = 15) for thorium(IV) and uranium(VI) ions were found to be 4.5 and 6.3 ng L⁻¹, respectively. The developed solid phase extraction method was successively utilized for the determination of traces thorium(IV) and uranium(VI) in environmental samples by ICP-MS.     

Characteristics of immunosorbents used as a new approach to selective solid-phase extraction in environmental analysis

Summary The trace-level determination of organic pollutants in complex matrices is difficult and often not reliable because theccurrent extraction procedures are non-selective. New extraction sorbents involving antigen-antibody interactions, called immunosorbents (ISs), have been synthesised in order to trap a group of structurally related pollutants. The IS capacity is always high for the analyte-antigen used to make the antibodies, but can be low for some related compounds. In this work, we show the relationship that exists between capacity, break-through volume and recovery of analytes because of the competition between the structurally related compounds for antibody sites. Breakthrough due to the overloading of the column should be avoided because calibration curves are no longer linear. The capacity of two ISs, one made for trapping the triazine pesticide group and the second for the phenylurea, group, have been optimised by selecting silica with 50 nm pore size. Calibration curves are linear for all the compounds in a mixture of ten phenylureas up to a concentration of 5 to 10 μg L⁻¹ for each compound when handling 50 mL water samples through a precolumn packed with 0.22 g of IS. Under these conditions, reliable quantitative results are obtained because calibration curves are similar when compounds are alone or in a mixture. Application to the clean-up of soil extracts illustrates the high selectivity and the high potential of these new sorbents in environmental analysis. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Analysis of organic pollutants in water at trace levels using fully automated solid-phase extraction coupled to high-performance liquid chromatography

Summary A method has been developed for the determination of trace levels of 32 pesticides, 19 explosives and 16 polycyclic aromatic hydrocarbons (PAH) in water in three individual steps. Solid-phase enrichment (SPE) is coupled to high-performance liquid chromatography (HPLC) with a fully automated system. The organic pollutants are enriched on reusable cartridges packed with adsorbent materials: pesticides and explosives on a mixed bed of divinylbenzene-ethylvinylbenzene copolymers (LiChrolut EN^?) and perfluorinated polyethylene (PolyF^?), and polycyclic aromatic hydrocarbons on C₁₈-modified silica (Zorbax^? ODS1). Thermally assisted desorption (TAD) has been shown to increase the recovery of analytes significantly. As all enriched analytes are transferred to the detector, only fifty millilitres of sample is needed for each single on-line analysis, compared with at least a litre for conventional methods. The separation of the enriched organic analytes is performed on specialized HPLC columns based on reversed-phase materials. The limits of detection of the system employed were found to be below 100 ng L⁻¹. Use of fluorescence detection for the polycyclic aromatic hydrocarbons resulted in limits of detection in the upper pg L⁻¹ range. Thek values, number of theoretical plates, the recovery rates and the limits of detection of this method for fast screening of organic pollutants from three fifty-millilitre aqueous samples are described. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Progress in the realisation of an autonomous environmental monitoring device for ammonia

Progress in the development of a micro-fluidic system for colorimetric monitoring of ammonia in drinking and wastewater is described. The ultimate goal is to have a miniaturised instrument that can produce accurate, reliable measurements, is easy to operate, has minimal power consumption, and can operate autonomously for a year. In this study, the indophenol reaction is incorporated into a simple, reliable analytical micro-fluidic system. Absorbance measurements for the blue ammonia-indophenol complex formed in the micro-fluidic system are shown. A key issue is the limiting stability of hypochlorite, a reagent used in the assay. The effects of hypochlorite concentration and impurities on the stability of hypochlorite are investigated and discussed. Decomposition is shown to be very dependent on the presence of heavy-metal impurities. With low levels of these catalytic metals and careful storage, hypochlorite has been shown to be stable for over a year.     

Dicholorbenzyl alkyl ether homologs as retention index markers and internal standards for the analysis of environmental samples using capillary gas chromatography

A homologous series of 2,4-dichlorobenzyl alkyl ethers (DCBEs) have been synthesized and purified for use as retention index calibrants and internal standards. They are stable, sensitive to ECD and FID and ideal for GC-MS, with base peaks at m/z 159/161. The retention index calibration against the n-alkanes for a linear temperature program (LTP) series is given and recommendations made for the most suitable members of the DCBE series for use as internal standards in organochlorine (OC) residue analysis.     

Transport and Fate of Organic Compounds in the Global Environment

The role of chemistry in our soon-to-be global industrial society requires a global perspective for the discussion of the uptake, transport, and conversion of chemical compounds in the environment. The fate of organic compounds in the volume flow of the atmosphere and hydrosphere can be categorized into transport pathways and adjustments of equilibria in the multiphase system atmosphere-oceans-land surface. The global volume flow in the atmosphere (wind, areas of high and low pressure) and in the hydrosphere (rivers, circulation of water in lakes, ocean currents) alone would account for the transport of organic compounds if they were stable and if all these compounds were molecularly distributed in these phases. However, this particular case is observed only for volatile chlorofluorocarbons and tetrachloromethane. For most organic compounds, complex adsorption/desorption processes on finely dispersed particle phases in the air and water as well as abiotic and biotic transformations determine the transport behavior. The global fate of a compound includes its accumulation as well as its decomposition in defined environmental compartments. Both phenomenon may have long-term consequences in the af-fected areas; this is indicated by the accumulation of polychlorobiphenyls and analogous compounds in marine mammals and deep-sea fauna, and is evident in the decomposition of chlorofluorocarbons in the stratosphere. The accepted definition of the level of a risk, the product of the probability of an event and the potential amount of damage, takes on a new dimension when viewed from a global perspective-especially when one further connects the extent of the damage to the possible means of correction. It is the responsibility of scientists to point out the irreparable regional to global consequences directly and indirectly connected to the production of chemicals and to provide suggestions for prevention. Politicians can only react by applying their methods to limit the damage; however, they cannot generate any solutions based on science.     

A new adsorbent for trace level organic contaminants

Summary A preliminary study has been carried out to evaluate a new adsorbent, Thermosorb, for trace level organic contaminants. For this purpose, a comparison was made with a well-characterized adsorbent, Tenax GC, using a prepared aqueous solution of trace organic components. In addition, a comparison was made of chromatograms of air contaminants obtained using both of these adsorbents, under equivalent conditions. The results clearly indicated the potential of this thermally stable, inorganic adsorbent for many trace organic substances of environmental interest.     

Capillary electrochromatography-applicability to the analysis of pesticides and compounds of environmental concern and the theory of electroosmosis

Summary The applicability of capillary electrochromatography to the automated analysis of pesticides and phthalate esters that are of environmental concern was assessed. Reversed phase packing materials were compared. Column to column and run to run reproducibility was established. Peak height with an internal standard gave the best reproducibility. Faster analysis than alternative HPLC methods was demonstrated for a mixture of the insecticide pirimicarb and related pyrimidines. The relationship between the concentration of an analyte in a sample and at the detector was determined by the use of radio-labelled¹⁴C-pirimicarb. The volume fraction of the liquid zone was 0.64. The possibility of electroosmosis through the pores is discussed with reference to the Rice-Whitehead model for electroosmotic flow in a capillary. A new parameter, the effective pore size is used in equations for electroosmosis through porous packings.     

Permeation liquid membrane for trace metal speciation in natural waters. Transport of liposoluble Cu(II) complexes

In this paper, the transport of Cu(II) in the presence of lipophilic Cu(II) organic complexes through permeation liquid membranes (PLMs) have been investigated. In natural waters, small organic compounds, which form liposoluble neutral complexes with Cu(II), are potentially toxic and bioavailable. Hence, to understand the role of liposoluble Cu(II) complexes in natural waters, four organic ligands: phthalic acid, bipyridyl, pyrocatechol and hydroxyquinoline, which form uncharged or lipophilic Cu(II) complexes, were tested. The results showed that the transport of lipophilic Cu(II) complexes through PLM depends on the lipophilicity of the complex. Applications of PLMs in natural waters are presented.     

Synthesis and Structure of Environmentally Relevant Perfluorinated Sulfonamides

Alkylated perfluorooctanesulfonamides are compounds of environmental concern. To make these compounds available for environmental and toxicological studies, a series of N-alkylated perfluorooctanesulfonamides and structurally related compounds were synthesized by reaction of the corresponding perfluoroalkanesulfonyl fluoride with a suitable primary or secondary amine. Perfluoroalkanesulfonamidoethanols were obtained from the N-alkyl perfluoroalkanesulfonamides either by direct alkylation with bromoethanol or alkylation with acetic acid 2-bromo-ethyl ester followed by hydrolysis of the acetate. N-Alkyl perfluorooctanesulfonamidoacetates were synthesized in an analogous way by alkylation of N-alkyl perfluoroalkanesulfonamides with a bromo acetic acid ester, followed by basic ester hydrolysis. Alternatively, N-alkyl perfluoroalkanesulfonamides can be alkylated with an appropriate alcohol using the Mitsunobu reaction. Perfluorooctanesulfonamide was synthesized from the perfluorooctanesulfonyl fluoride via the azide by reduction with Zn/HCl. All perfluorooctanesulfonamides contained linear as well as branched C₈F₁₇ isomers, typically in a 10:1 to 30:1 ratio. The crystal structures of N-ethyl and N,N-diethyl perfluorooctanesulfonamide show that the S-N bond has considerable double bond character. This double bond character results in a significant rotational barrier around the S-N bond (ΔG^≠ = 62-71 kJ mol⁻¹) and a preferred solid state and solution conformation in which the N-alkyl groups are oriented opposite to the perfluorooctyl group to minimize steric crowding around the S-N bond.