A Water-Stable Lanthanide Coordination Polymer as Multicenter Platform for Ratiometric Luminescent Sensing Antibiotics

As a hot topic of global concern, the distinguishing and detecting of antibiotic pollution is crucial owing to its adverse effect on ecosystems and human health stemming from excessive use and poor management. Herein, a water-stable lanthanide coordination polymer sensor (Dy-TCPB) with multiple emitting centers is prepared. The versatile Dy-TCPB can conveniently differentiate various antibiotics, and displays a self-calibration luminescent response to nitrofurazone (NFZ) and furazolidone (FZD). Each antibiotic exhibits notable correlation to a unique combination of the two ligand-to-Dy ion emission intensity ratios, enabling two-dimensional fingerprint recognition. Furthermore, the novel self-calibration sensor demonstrates effective recognition of NFZ and FZD with excellent sensitivity and selectivity, and detection limits as low as 0.0476 and 0.0482 μm for NFZ and FZD, respectively. The synthetic approach for the fabrication of a singular coordination polymer exhibiting multiple emissions provides a promising strategy for the development of facile and effective ratiometric sensors.     

Unveiling the importance of reactant mass transfer in environmental catalysis: Taking catalytic chlorobenzene oxidation as an example

To date, investigations onto the regulation of reactants mass transfer has been paid much less attention in environmental catalysis. Herein, we demonstrated that by rationally designing the adsorption sites of multi-reactants, the pollutant destruction efficiency, product selectivity, reaction stability and secondary pollution have been all affected in the catalytic chlorobenzene oxidation (CBCO). Experimental results revealed that the co-adsorption of chlorobenzene (CB) and gaseous O₂ at the oxygen vacancies of CeO₂ led to remarkably high CO₂ generation, owning to their short mass transfer distance on the catalyst surface, while their separated adsorptions at Brönsted HZSM-5 and CeO₂ vacancies resulted in a much lower CO₂ generation, and produced significant polychlorinated byproducts in the off-gas. However, this separated adsorption model yielded superior long-term stability for the CeO₂/HZSM-5 catalyst, owning to the protection of CeO₂ oxygen vacancies from Cl poisoning by the preferential adsorption of CB on the Brönsted acidic sites. This work unveils that design of environmental catalysts needs to consider both of the catalyst intrinsic property and reactant mass transfer; investigations of the latter could pave a new way for the development of highly efficient catalysts towards environmental pollution control.     

Zur hydrogeologischen Interpretation von Isotopendaten im Zusammenhang mit Stofftransportprozessen

The migration of radionuclides and other tracers in porous layers is determined by substance transport. The physical and hydraulic basis of retardation is investigated. A definition of a factor of retardation is given, describing the ratio between the pore velocity of the water and the velocity of tracer migration. Consequences to the groundwater protection are discussed.     

Analysis and Fate of Dibenzothiophene Derivatives in the Marine Environment

Abstract

Dibenzothiophene (DBT) and related methylated derivatives are known to be among the most persistent and probably the most toxic PAH in the marine environment. Their analysis and their fate by photo-oxidation and biodegradation were studied.

The methylated DBT isomers, provided that they are resolved by high resolution GC, were used as organic markers of oil pollution in oysters. The determination of the relative distribution of the four monomethyl DBT allowed to characterize the source of pollution in an oyster-area in the North Brittany (France).

The fate of methylated DBT compounds was studied in a controlled sea-water enclosure where Arabian light oil was spilled. Analysis of the weathered oil showed that: (i) oil was degraded by photo-oxidation at a rate of 0.004% day; (ii) the half-lives of photolysis of methylated DBT was dependent upon the number of methyl groups on the aromatic nucleus: 8 days for DBT, 20 days for methyl-1 DBT and more than 2 years for trimethylated DBT. Compounds solubilized in the water column were identified as methyl-substituted dibenzothiophene sulfoxides and sulfones by HPLC with synchrofluorescence and GC-flame photometric detection.

The metabolic pathway of DBT was established in vitro. Rat microsomes transformed this substrate to DBT-5-oxide and subsequently to DBT-5-dioxide. Such an enzymatic S-oxidation was shown to be principally Cytochrome-P-450 dependent. It is suggested that the mixed-function oxidase (MFO) activity of marine species could be evaluated by this S-oxidation test in addition to the usual aryl hydrocarbon hydroxylase.     

Polybrominated diphenyl ethers (PBDEs) in marine sediment of Thermaikos Gulf,Greece

Polybrominated diphenyl ether (PBDE) concentrations were determined in marine sediment samples collected from 7 different locations around Thermaikos Gulf in north Greece. PBDEs were detected in all sampling sites and their average total concentration (ΣPBDEs) ranged from 0.26 to 4.92?ng?g^?1?d.w. Concentrations were an order of magnitude higher in locations outlining the inner part of the Gulf, which were also closer to industrial areas, sewage treatment plant discharges, the city's harbour and landfill area. These findings suggest pollution in the aquatic ecosystem from industrial and urban activities in the area. Congener profiles exhibit predominance of BDE-209, while concentrations of other PBDE congeners were usually lower, when compared to similar studies from other countries globally, indicating that Thermaikos Gulf is among the low-polluted areas. Statistical analysis showed significant differences among the higher polluted sampling stations. Statistically significant differences also existed between sampling stations with high and low PBDE concentrations. Correlations between congeners suggested local contamination sources; however, specific point sources of pollution were not established.     

Styrene-PEG (600) DMA Crosslinked Polymers for Absorption of Oil Derivatives

In this work, styrene (St) based crosslinked polymers were prepared for removal of oil derivatives from aqueous solutions. Polyethylene glycol (600) dimethacrylate (PEG (600) DMA) was used as crosslinker in synthesis of styrene based crosslinked polymers, for the first time. The polymers were characterized by FTIR, SEM, elemental analysis and solvent (toluene, chloroform and fuel-oil) absorption capacities. The effects of different reaction parameters like crosslinker type, diluents amount and the presence of pore forming agent on the absorption properties of polymers were investigated. The polymers synthesized by using PEG (600) DMA have higher solvent absorption capacity than that of synthesized by using conventional crosslinker. Furthermore, the polymers synthesized in the presence of good diluents have higher absorption capacities. The addition of pore forming agent into the reaction medium has also improved the absorption rate of polymers. The absorption capacity of polymers in different solvents is in order of chloroform > toluene > fuel-oil. It was seen that oil derivatives can be removed efficiently from water by the St-PEG (600) DMA polymers.     

Evolution of the international workshops on quantitative structure-activity relationships (QSARs) in environmental toxicology†

This presentation will review the evolution of the workshops from a scientific and personal perspective. From their modest beginning in 1983, the workshops have developed into larger international meetings, regularly held every two years. Their initial focus on the aquatic sphere soon expanded to include properties and effects on atmospheric and terrestrial species, including man. Concurrent with this broadening of their scientific scope, the workshops have become an important forum for the early dissemination of all aspects of qualitative and quantitative structure-activity research in ecotoxicology and human health effects. Over the last few decades, the field of quantitative structure/activity relationships (QSARs) has quickly emerged as a major scientific method in understanding the properties and effects of chemicals on the environment and human health. From substances that only affect cell membranes to those that bind strongly to a specific enzyme, QSARs provides insight into the biological effects and chemical and physical properties of substances. QSARs are useful for delineating the quantitative changes in biological effects resulting from minor but systematic variations of the structure of a compound with a specific mode of action. In addition, more holistic approaches are being devised that result in our ability to predict the effects of structurally unrelated compounds with (potentially) different modes of action. Research in QSAR environmental toxicology has led to many improvements in the manufacturing, use, and disposal of chemicals. Furthermore, it has led to national policies and international agreements, from use restrictions or outright bans of compounds, such as polychlorinated biphenyls (PCBs), mirex, and highly chlorinated pesticides (e.g. DDT, dieldrin) for the protection of avian predators, to alternatives for ozone-depleting compounds, to better waste treatment systems, to more powerful and specific acting drugs. Most of the recent advances in drug development could not have been achieved without the use of QSARs in one form or another. The pace of such developments is rapid and QSARs are the keystone to that progress. These workshops have contributed to this progress and will continue to do so in the future.     

超声辅助提取/离子色谱法测定铬污染土壤中的六价铬

建立了超声辅助提取/离子色谱法测定铬污染场地中铬（Ⅵ）的方法。选用0.3 mol/L的KCl溶液作提取剂,对12组土壤样品中的铬（Ⅵ）进行超声辅助提取20 min。采用Metrosep A Supp 4-250（250 mm×4.0mm）型阴离子分离柱,以4 mmol/L Na₂CO₃-1 mmol/L NaHCO₃混合溶液为淋洗液对样品进行分离分析。铬（Ⅵ）在0.01²0 mg/L浓度范围有较好的线性关系,相关系数（r²）为0.999 8;该方法的检出限为0.003 mg/L,加标回收率为96.4%¹06.8%,相对标准偏差（RSD,n=3）为0.56%。该方法具有简便、快速、准确等优点,适用于铬污染场地的监测与调查。     

Green ultra‐fast high‐performance liquid chromatographic method using a short narrow‐bore column packed with fully porous sub‐2 μm particles for the simultaneous determination of selected pharmaceuticals as surface water and wastewater pollutants

Fast separations are very desirable in laboratories that analyze large numbers of samples per day or those needing short turn‐around times. Traditional HPLC methods using conventional stationary phases and standard column dimensions require significant amounts of organic solvents and generate large volumes of waste. With growing awareness about the environment, the development of green technologies has been receiving increasing attention. In this work, a very fast green analytical method based on LC‐UV using a short narrow bore column packed with fully porous sub‐2 μm particles has been developed for simultaneous determination of nine pharmaceuticals in wastewater and surface water. The chromatographic separation was optimized in order to achieve short analysis time and good resolution for all analytes in a single run. All analytes could be separated in 1 min with good resolution. Sample preparation was executed by solid phase extraction using Oasis HLB cartridges. The method developed was validated based on parameters such as linearity, precision, accuracy, detection, and quantification limits. The recovery ranged from 70.9 to 92.5% with SDs not higher than 5.4%, except for acetaminophen and sulphanilamide. LODs ranged from 0.6–2.5 μg/L, while the LOQs were in the range 2–8 μg/L.