Improvement of the SOS/UMU Test for Preliminary Screning of Mutagens

Abstract

A short-term system to detect environmental mutagens is presented by using a plasmid (pSK1002) carrying a fused gene umuC′-′lacZ introduced into Salmonella typhimurium TA1535. Higher sensitivity, repeatability, and simplicity were achieved when (1) the culture volume taken from 2hrs after treatment with test compound was increased to 1.5ml diluted with distilled water to 2.5ml, (2) the 15μ 1 of 3% SDS solution saturated with chloroform was used as the disruptor of the cell membrane. and (3) an incubation -temperature of 37°C was used. At the above experimental conditions, the time required for the mutagen test was shortened to 3hrs. Based on the results of the present study, it seems that the improved SOS/umu test is useful for screening of mutagenic complex environmental mixtures.     

Rapid Methods in Analytical Chemistry

This article presents the most recent research in analytical chemistry concerning the development of rapid methodologies covering the period from 2009 up until today. In this context, different useful analytical methods have been developed based mainly on typical techniques such as gas chromatography, liquid chromatography, mass spectrometry, electrophoresis, electroanalytical chemistry, and biosensors. The analytical features of these methods have allowed the analysis of samples of different natures, such as environmental, food, pharmaceutical, and biological type, in which wide classes of analytes are promptly determined. The main advantages of these methods are included and discussed in this review regarding novelty, rapidity, sensitivity, selectivity, and costs. It is concluded that the development of rapid methods is still a growing trend in analytical chemistry and that gas- and liquid-chromatography mainly coupled to different modes of mass spectrometry are the most common analytical techniques applied today. Regarding the matrices analyzed, most of the methods have been developed for food analysis, followed by biological and environmental matrices.     

Capillary electrochromatography-applicability to the analysis of pesticides and compounds of environmental concern and the theory of electroosmosis

Summary The applicability of capillary electrochromatography to the automated analysis of pesticides and phthalate esters that are of environmental concern was assessed. Reversed phase packing materials were compared. Column to column and run to run reproducibility was established. Peak height with an internal standard gave the best reproducibility. Faster analysis than alternative HPLC methods was demonstrated for a mixture of the insecticide pirimicarb and related pyrimidines. The relationship between the concentration of an analyte in a sample and at the detector was determined by the use of radio-labelled¹⁴C-pirimicarb. The volume fraction of the liquid zone was 0.64. The possibility of electroosmosis through the pores is discussed with reference to the Rice-Whitehead model for electroosmotic flow in a capillary. A new parameter, the effective pore size is used in equations for electroosmosis through porous packings.     

Detection of soil pollution by hydrocarbons using headspace-mass spectrometry and identification of compounds by headspace-fast gas chromatography-mass spectrometry

The direct coupling of a headspace sampler with a mass spectrometer is proposed as a screening tool for the rapid detection of soil pollution by hydrocarbons from petroleum and derivatives. The samples are subjected to the headspace generation process, with no prior treatment, and the volatiles generated are introduced directly into the mass spectrometer, thereby obtaining a fingerprint of the sample analysed. Suitable treatment of the signal by chemometric techniques allows unequivocal characterisation of the different types of sample. The use of fast gas chromatography with a mass spectrometer detector coupled to the headspace sampler allows identification of the major hydrocarbons present in the mineral and organic polluted samples, interpretation of the results obtained, and demonstrates the analytical potential of headspace-mass spectrometry coupling.     

固相萃取-气相色谱法测定北京市水样中的邻苯二甲酸酯

研究了使用毛细管柱（OV-1701）分离、FID作为检测器的气相色谱法测定水中5种邻苯二甲酸酯（PAEs）[邻苯二甲酸二乙酯（DEP）,邻苯二甲酸二丁酯（DBP）,邻苯二甲酸丁基苄基酯（BBP）,邻苯二甲酸二（2-乙基己基）酯（DEHP）,邻苯二甲酸二环己酯（DCHP）]的色谱条件。5种PAEs检出限在0．1～0．3μg／L之间,所测PAEs的质量浓度在0．5～100μg／L范围内,RSD在2．2％～3．3％之间,各物质校正曲线（质量浓度与峰面积）的相关系数在0．9970～0．9993之间。利用固相萃取技术萃取水中PAEs,回收率在82．5％～110．5％之间,RSD在1．1％～4．0％之间。北京市吴家村污水处理厂4个采样点中邻苯二甲酸酯浓度在（0．7～193．3）μg／L之间。北京市南护城河的3个采样点中邻苯二甲酸酯浓度在（0．1～241．8）μg／L之间。     

Improvement of quality control of speciation analysis using hyphenated techniques A decade of progress within the European Community

The awareness of a need for an improved control of environmental contamination levels has led to the development of new hyphenated techniques for the determination of a wide variety of chemical species (e.g., organotins, methyl-mercury, alkyl-lead compounds etc.). These techniques generally involve many analytical steps such as extraction, derivatisation, separation and detection which have to be carried out in such a way that the speciation is not changed during the abalytical process. The need for evaluating the method's performance has led the BCR programme of the European Commission (now Standards, Measurements and Testing programme) to conduct series of interlaboratory studies during the last decade. These projects followed a step-by-step approach for the evaluation of different steps of the analytical methods used, e.g., simple solutions to test the detection, cleaned extract to evaluate the separation, spiked samples to test the extraction and natural samples to evaluate the whole analytical procedures. These collaborative projects allowed most of the sources of errors related to either a technique or a laboratory to be detected and removed. This paper gives an account of discussions of possible errors occurring in speciation analysis and presents examples of technical scrutiny of hyphenated techniques using chromatography as applied to the determination of tributyltin, methyl-mercury and trimethyllead.     

Preparation and Characterization of Poly Vinyl Alcohol/Poly Vinyl Pyrrolidone/Clay Based Nanocomposite by Gamma Irradiation

A series of PVA/PVP/clay nanocomposite were prepared by gamma irradiation with different clay contents of (0.15, 0.3, 1, 1.5, 3 and 5 wt%). The gelation content and swelling behavior were investigated. The morphology and structure of PVA/PVP/clay nanocomposite and dispersion of the clay nanoparticles in the polymeric matrix were examined by infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The introduction of clay into polymeric matrix was investigated by X-ray diffraction pattern (XRD) and Transmission electron microscope (TEM). It is observed that, the increase of the clay content causes a decrease in the swelling percent. The thermal stability studies confirmed that the introduction of clay lead to an increase in the thermal stability. The TEM results showed that the clay nanoparticles are interchelated or exfoliated in the polymeric matrix. Some desirable characteristics such as relatively good swelling and excellent barrier capability against microbe penetration suggested that PVA/PVP/clay nanocomposite can be a good candidate as a wound dressing.     

The Use of Various Chromatographic Techniques for the Determination of Phenylurea Herbicides and Their Corresponding Anilines in Environmental Samples,II. Applications

Abstract

In earlier work, various strategies have been developed for the trace-level determination of phenylurea herbicides and the anilines which are their main degradation products. They include catalytic hydrolysis of the phenylureas on silica, liquid chromatographic fractionation of complex mixtures of herbicides and anilines, derivatization of anilines and herbicides with electron-capture-sensitive reagents, and final analysis by means of capillary gas chromatography. In the present paper, the application of these principles to trace-level analysis of surface water, soil and crop samples is demonstrated.     

A pilot study for the production of a certified reference material for trace elements in honey

In the context of the general mandate of the European Union Community Reference Laboratory (CRL) for residues in living animals and their products established at the Istituto Superiore di Sanità, a pilot study was undertaken to assess the possibility of producing a new certified reference material (CRM) for trace elements in a matrix of honey. The elements considered were As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Sn, V and Zn. Their determination was performed by inductively coupled plasma (ICP)-based techniques. Data obtained with different ICP techniques were generally in good agreement. In light of these results, the next step was the effective production of a candidate CRM in a honey matrix. In the preliminary phase, two different types of honey, i.e., Eucalyptus (solid and sticky) and Robinia (viscous and sticky), were pretreated at the Institute for Reference Materials and Measurements, Joint Research Centre, European Commission (EC-JRC-IRMM) in order to produce the materials candidate for the certification process. Approximately 600 ampoules were thus produced for the Robinia honey and 450 ampoules for the Eucalyptus honey, each ampoule containing 5 g of an aqueous solution of honey (with 20% and 30% high purity water, respectively) and sealed under inert gas (Ar). A ring test to determine the levels of the chemical elements and a long-term study to evaluate the stability of the samples is in progress. Tentative figures for the analytes of interest are (in ng g⁻¹): Robinia, As, 1.28±0.09; Cd, 0.59±0.08; Cr, 2.36±0.21; Cu, 57.6±3.2; Fe, 209±9; Mn, 90.8±3; Ni, 18.1±0.6; Pb, 23±1.5; Sn, 8.10±0.35; V, 1.19±0.37; and Zn, 178±4; Eucalyptus, As, 3.18±0.21; Cd, 0.70±0.08; Cr, 2.73±0.22; Cu, 141±6; Fe, 926±16; Mn, 1905±81; Ni, 7.77±0.4; Pb, 138±4; Sn, 7.97±0.16; V, 3.47±0.15; and Zn, 405±9.     

Imaging of Self‐Assembled Structures: Interpretation of TEM and Cryo‐TEM Images

The investigation of solution‐borne nanostructures by transmission electron microscopy (TEM) is a frequently used analytical method in materials chemistry. In many cases, the preparation of the TEM sample involves drying and staining steps, and the collection of images leads to the interaction of the specimen with the electron beam. Both aspects call for cautious interpretation of the resulting electron micrographs. Alternatively, a near‐native solvated state can be preserved by cryogenic vitrification and subsequent imaging by low‐dose cryogenic TEM. In this Minireview, we provide a critical analysis of sample preparation, and more importantly, of the acquisition and interpretation of electron micrographs. This overview should provide a framework for the application of (cryo)‐TEM as a powerful and reliable tool for the analysis of colloidal and self‐assembled structures with nanoscopic dimensions.