放电脉冲重频准分子激光器在不同应用领域的发展现状(英文)

研究了脉冲宽度为25～40 ns的放电脉冲XeCl准分子激光器的工作参数。结果显示,激光器产生的脉冲能量为0.2～0.7 J,重复频率为100 Hz,表明在泵浦功率为2.8～3.3 MW/cm3时,激光器实现了2.6%的激光效率和3.8%的本征效率。     

Investigation of the near-threshold cluster resonance in ~(14)C

An experiment for p(~(14)C,~(14)C~*→~(10)Be+α)p inelastic excitation and decay was performed in inverse kinematics at a beam energy of 25.3 Me V/u.A series of~(14)C excited states,including a new one at 18.3(1)Me V,were observed which decay to various states of the final nucleus of~(10)Be.A specially designed telescope system,installed around zero degrees,played an essential role in detecting the resonant states near theα-separation threshold.A state at 14.1(1)Me V is clearly identified,being consistent with the predicted band-head of the molecular rotational band characterized by theπ-bond linear chain configuration.Further clarification of the properties of this exotic state is suggested by using appropriate reaction tools.     

基于分层远程荧光膜白光LED的制备及光谱性能研究

基于荧光粉分层和远程荧光封装技术,采用热压法制备出双层远程荧光膜,并封装出白光LED。通过荧光分光光度计和可见光光谱分析系统研究了绿色和红色远程荧光膜不同分层顺序及不同发射波长对于白光LED光谱性能的影响。研究发现：蓝-绿-红(B-G-R)膜层封装形式相较于蓝-红-绿(B-R-G)辐射发光效率提高了31.69%,色保真度和色域指数均随着红色远程荧光膜波长的增加而升高,发射波长为660 nm时制备的白光LED色保真度最高值达到91,色域指数最高值达到104,辐射发光效率值则与波长成反比关系;色保真度随着绿色远程荧光膜波长的增加逐渐降低,色域指数则先降低后升高,发射波长为530 nm制备的白光LED具有最高的辐射发光效率,达到300.7 lm·W-1。研究所得出的相关结论对于实际的应用具有一定的参考意义。     

非真空传输的高效交叉偏振滤波设计与产生

采用常规透镜设计了适用于非真空环境中交叉偏振波(XPW)产生的双透镜聚焦系统,在相对较短的距离实现了长焦透镜聚焦的效果,并测量了聚焦后的激光脉冲,发现其没有显著的非线性相位积累,保证了激光光束质量.在非真空中采用双BaF_2晶体得到了XPW系统转换效率22%,光谱1.78倍展宽的净化脉冲输出,双透镜组合聚焦形式使得双BaF_2晶体间距在13—22 cm内可保证20%以上的XPW转换效率,双晶体间距的调节冗余度提高了两个量级,极大地降低了双晶转换效率对晶体间距的依赖.这种正负透镜组合聚焦的光路设计在非真空中实现了高效稳定的XPW输出,为后续的放大应用提供了高对比度、宽光谱的高质量种子源.     

Two-stage electrostatic precipitator with co- and counter-flow particle prechargers

Lab-scale, two-stage electrostatic precipitation system comprising of precharging stage, in which PM2.5 particles are electrically charged, and collection stage, in which the charged particles are removed from the flowing gas by electric field, was investigated in this paper. Two types of electrostatic particle prechargers were compared with respect to the collection efficiency of the system: (1) co-flow precharger, in which ionic current was generated co-currently with the gas conveying the particles, and (2) counter-flow precharger, in which ionic current was generated oppositely to the flowing gas. In each case, the electrodes of precharger were supplied with DC or AC high-voltage in order to compare the effect of discharge mode on the collection efficiency of two-stage electrostatic precipitator. The collection stage was formed by two parallel-plate electrodes connected to DC high voltage source. Plate electrodes without discharge points (spikes) are corona-free electrodes, which prevent the collection stage from electrical discharges, and reduce the probability of back discharge ignition. The back discharge decreases collection efficiency of conventional electrostatic precipitators.It was concluded that the co-flow electrode configuration of the precharger, supplied with DC high voltage, has the highest total number collection efficiency for PM2.5 particles, higher than 95% and the mass collection efficiency larger than 99%. The counter-flow precharger provided only about 90% number collection efficiency of two-stage electrostatic precipitator. It was also shown that by AC electrode excitation, the collection efficiency of the system is lower than for DC supply. The two-stage electrostatic precipitators allowed obtaining higher fractional collection efficiency for PM2.5 particles than other conventional systems and can be recommended as highly effective devices for gas cleaning in power plants or cement industry.     

最小成本生成树对策上Shapley值的新刻画及其应用

2002年,Kar利用有效性、无交叉补贴性、群独立性和等处理性四个公理对最小成本生成树对策上的Shapley值进行了刻画。本文提出了“群有效性”这一公理,利用这一公理和“等处理性”两个公理,给出了最小成本生成树对策上Shapley值的一种新的公理化刻画。最后,运用最小成本生成树对策的Shapley值,对网络服务的费用分摊问题进行了分析。     

高亮度白光LED用外延片的新进展

文章首先介绍了发光二极管（LED）的内量子效率、外量子效率的基本概念和提高量子效率的基本方法，接着对LED外延的结构和方法做了简要介绍．文章的第三和第四部分则着重介绍了提高内、外量子效率的外延方法，这些方法包括外延结构的优化，侧向外延生长，SiC和GaN衬底的生长，AIInGaN四元系有源区生长，非极性面、半极性面的外延，表面粗化结构生长，图形化二次外延结构．图形化蓝宝石衬底上的外延，提高载流子注入效率的结构和组分设计．文章的第五部分则介绍了基于可靠性和成本考虑的其他新型外延结构，第六部分介绍了提高LED可靠性的外延方法．最后得出结论：采用非极性面的GaN衬底，生长优化的LED结构，并结合光子晶体技术，可望取得突破性进展．     

电纺ZnO纳米纤维电子传输层提高倒置PTB7∶PC70BM电池效率

研究利用静电纺丝制备的不同直径ZnO纳米纤维作为倒置结构有机太阳能电池的电子传输层对器件转化效率的影响。首先通过静电纺丝技术成功制备了半径在43～110 nm之间的ZnO纳米纤维,然后将ZnO纳米纤维作为电子传输层加入到倒置结构有机太阳能电池（ITO/ZnO∶ZnO nanofiber/PTB7∶PC₇₀BM/MoO₃/Al）。与平面结构的ZnO电子传输层相比,ZnO纳米纤维具有比表面积大等优点,增加了电子传输和抽取能力,提高了器件的光电转化效率。实验发现ZnO纳米纤维的直径越小,电池效率越大。当ZnO纳米纤维直径为(46±5)nm,接收时间为30 s时,作为电子传输层的电池效率提高了8%。     

透射光栅的实验标定和衍射效率的理论模拟

透射光栅广泛应用于软X射线能谱测量.为了获得用于惯性约束聚变研究的透射光栅的各级衍射效率及其他参数,在北京同步辐射源上200—1600 eV能量范围内对其进行了标定,获得了透射光栅衍射效率的实验结果.扩展了透射光栅衍射效率的计算方法,提出了7边准梯形截面衍射效率计算模型.分析拟合了实验数据,理论结果与实验结果很好符合.得到了7边准梯形的透射光栅栅线截面结构. 关键词： 透射光栅 衍射效率 实验标定 光栅模型