The pressure induced B1-B2 phase transition of alkaline halides and alkaline earth chalcogenides. A first principles investigation

In this work, we considered the pressure induced B1-B2 phase transition of AB compounds. The DFT calculations were carried out for 11 alkaline halides, 11 alkaline earth chalcogenides and the lanthanide pnictide CeP. For both the B1 and the B2 structures of each compound, the energy was calculated as a function of the cell volume. The transition pressure, the bulk moduli and their pressure derivatives were obtained from the corresponding equations of state. The transition path of the Buerger mechanism was described using roots of the transition matrix. We correlated the computed enthalpies of activation to some structure defining properties of the compounds. A fair correlation to Pearsons hardness of the ions was observed.     

G2 PREDICTION OF THE ENTHALPIES OF FORMATION FOR SOME DIATOMIC CATIONS AND NEUTRALS

Ｇ２ＰＲＥＤＩＣＴＩＯＮＯＦＴＨＥＥＮＴＨＡＬＰＩＥＳＯＦＦＯＲＭＡＴＩＯＮＦＯＲＳＯＭＥＤＩＡＴＯＭＩＣＣＡＴＩＯＮＳＡＮＤＮＥＵＴＲＡＬＳＳｕＫｅｈｅＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｃａｌＥｎｇｉｎｅｒｉｎｇ，ＮｏｒｔｈｗｅｓｔｅｒｎＰｏｌｙ...     

Thermodynamics of electrolytes. X. Enthalpy and the effect of temperature on the activity coefficients

Heat of dilution and of solution data are fitted to the form of equation corresponding to that used successfully for activity and osmotic coefficients over a wide range of concentrations. The resulting parameters give the change with temperature of the activity and osmotic coefficients. Results are reported for 84 electrolytes of 1-1, 2-1, 3-1, and 2-2 valence types.     

Thermodynamic mixing properties of liquids in the system Na2O-SiO2

Enthalpies of fusion have been measured by differential scanning calorimetry for a Na₂O-SiO₂ system at 50, 66.6, and 74.4 mol% SiO₂. Enthalpies of mixing of liquids obtained from different calorimetry techniques are critically evaluated. The data on calorimetric enthalpy, activity of Na₂O, cristobalite liquidus, and immiscibility gap are used to determine the enthalpy and entropy of mixing of sodium-silicate liquids are determined as a function of composition by the least squares method. The derived mixing properties are based only on the experimental data and are independent of any assumption about the structure and chemical species in liquids. The enthalpy of mixing has a minimum value of −120 kJ/mol at 35-40 mol% SiO₂ and is convex upward around 80-90 mol% SiO₂. The entropy of mixing have a maximum value of + 6 J/K-mol at 75 mol% SiO₂, and it decreases with the SiO₂ content to −5 J/K-mol at 40 mol% SiO₂. This decrease in entropy can be accounted for by ideal mixing of Q⁴, Q³, and Q^{0 + 1 + 2} (= Q⁰ + Q¹ + Q²) species in the liquids and is responsible for the negative temperature dependence of the partial molar Gibbs energy of mixing of Na₂O, observed in activity measurements. Comparison of the present results with previous values suggests that a quasi-chemical model and the Adam-Gibbs model overestimate the configurational entropy of mixing of liquids.     

Line Broadening and Enthalpy: Some Empirical Calibrations of Solid Solution Behaviour from IR Spectra

Following recent developments in the application of autocorrelation analysis of line broadening in powder absorption IR spectra, the possibility that elastic strain heterogeneities are responsible both for such broadening and for enthalpy variations in solid solutions has been explored systematically. Recent data for five silicate solid solutions, augite-jadeite, almandine-grossular, albite-anorthite, anthophyllite-grunerite and clinoenstatite-clinoferrosilite, are reviewed. Variations in the autocorrelation parameter for line broadening, j corr, scale linearly with calorimetric data for enthalpy variations, j H , associated with cation substitutions and ordering in these systems. It is proposed that, while there may not be a universal calibration of j H in terms of j corr for all structures, it should be possible to produce empirical calibrations for groups of solid solutions with the same basic structure. Variations in j corr at different phonon frequency ranges provide additional insights into the structural mechanisms by which ordering, mixing, displacive and reconstructive processes occur in silicate solid solutions.     

Thermodynamic parameters for the complexation of water‐insoluble betulin derivatives with (2‐hydroxypropyl)‐γ‐cyclodextrin determined by phase‐solubility technique combined with capillary zone electrophoresis

The complexation of betulinic and betulonic acids (BIA and BOA) (pentacyclic lupane triterpenoids) with (2‐hydroxypropyl)‐γ‐cyclodextrin (HP‐γ‐CD) was studied at different temperatures using the method combining phase‐solubility technique and CZE. In contrast to mobility shift ACE utilizing the electrophoretic mobility, in this approach, the peak areas are used. The apparent binding (stability, formation) constants are obtained by the Higuchi and Connors method from the linear segment of compound solubility diagrams in CD solutions. It was found that the apparent binding constants of the HP‐γ‐CD complexes of BIA and BOA decrease with increasing temperature. The binding constants of BOA complexes are slightly higher than those of BIA complexes; this can be explained by difference in the hydration degrees of carbonyl and hydroxyl groups. On the basis of the binding constants obtained and their temperature dependences (van't Hoff plot), the enthalpy as well as entropy changes and Gibbs free energies were calculated. It was found that the complexation was characterized by negative changes of enthalpy and entropy, that is, it was controlled by enthalpy changes. The results obtained can be used for the optimization of microcapsulation processes of BOA and BIA with the HP‐γ‐CD application in order to increase solubility and bioavailability of these compounds.     

The influence of the recycling stress history on LDPE waste pyrolysis

It is elementary to recognize the benefits and the negative impacts of the use of plastic materials on modern societies. Polyethylene (PE) is the major plastic component present in the municipal solid waste. In this paper, two types of low-density PE (LDPE) waste with different mechanical recycling stress histories were used to investigate the influence of recycling cycles on pyrolysis. The kinetic triplet and thermal degradation study were obtained using TGA data.To determine the sample composition and hydrocarbon arrangements, ultimate, proximate and X-ray diffraction analyses were carried out. Taking advantage of these analyses and combining them with differential scanning calorimetry (DSC) data, a series–parallel pyrolysis pathway was formulated. The waste of recycled polyethylene presented low enthalpy of pyrolysis, at about 205 J/g against 299 J/g for a virgin PE. The DSC analyses evidenced a multi-step reaction behavior of the pyrolysis, confirmed by the kinetic study using different isoconversional methods: the waste of recycled polyethylene presented a higher variation of activation energies as a function of the fraction reacted. The main conclusion is that the results suggest that the recycling stress history promotes the increase of long carbon chains while weakening the boundary among the compounds. This explains the fact that recycled waste needs less activation energy than other samples to degrade thermally. Finally, different categories of low-density polyethylene wastes must be considered when dealing with either kinetics or modeling of the product recovery process.     

Calorimetric study of melts in the System KF - K<Subscript>2</Subscript>NbF<Subscript>7</Subscript>

The relative enthalpies of melts in the system KF - K₂NbF₇ were measured by drop-calorimetry at the temperatures 1058, 1140 and 1208 K as a function of composition. Heat capacities of melted mixtures and enthalpies of mixing were determined using the experimental data. The molar heat capacity of melts diverges slightly from additivity. The molar enthalpy of mixing of melts shows small negative deviation from ideality which decreases with decreasing temperature. The thermal effect at mixing was assigned predominantly to association reactions producing more complex fluoroniobate anions.      

Di-hydroxybenzenes: Catechol, resorcinol, and hydroquinone: Enthalpies of phase transitions revisited

Molar enthalpies of sublimation of 1,2-di-hydroxybenzene, 1,3-di-hydroxybenzene, and 1,4-di-hydroxybenzene were obtained from the temperature dependence of the vapor pressure measured by the transpiration method. The molar enthalpies of fusion of 1,2- and 1,4-isomers were measured by differential scanning calorimetry (DSC). A large number of the primary experimental results on the temperature dependences of vapor pressure and phase transitions have been collected from the literature and have been treated in a uniform manner in order to derive sublimation, vaporization and fusion enthalpies of di-hydroxybenzenes at the reference temperature 298.15 K. The data sets on phase transitions were checked for internal consistency. This collection together with the new experimental results reported here has helped to resolve contradictions in the available thermochemical data and to recommend consistent and reliable sublimation, vaporization and fusion enthalpies for all three isomers under study.     

Thermodynamical studies of designed ligands binding to Cel7A using partial-filling capillary electrophoresis

A convenient experimental method for thermodynamical studies based on partial-filling affinity CE is presented. The advantages of this approach are the possibility to determine binding energies from relatively weak interactions as well as the small amounts of samples consumed. In order to explore the affinity and selectivity of the cellobiohydrolase Cel7A, a number of propranolol analogues were recently designed. The affinities of a selection of these ligands were determined in the temperature interval 15-40 degrees C, and DeltaG degrees , DeltaH degrees and DeltaS degrees were obtained by means of Van't Hoff plots. Through these experiments, the importance of the entropy contribution in the complexation between the ligands and Cel7A has been demonstrated.