Determination of the Enthalpies of Vaporization of Cyclic Organic Peroxides by Correlation of Changes in Gas Chromatographic Retention Times

Liquid and solid cyclic peroxides derived from aliphatic ketones are explosive materials so their enthalpies of vaporization and other thermodynamic or condensed-phase properties cannot be measured directly. In this work the enthalpies of vaporization of peroxides at 298.15 K were estimated simply from gas chromatographic retention times measured at different temperatures. The technique correlates changes in the retention times of compounds whose enthalpies of vaporization are known (called the reference series), with those of the compounds of interest. If t _R′ is the adjusted retention time (retention time of each compound minus the retention time of unretained diethyl ether, used as solvent) a plot of ln t _R′ against 1/T for each compound (reference compounds and cyclic peroxides) results in a straight line (r ² > 0.99 for all compounds). The enthalpy of transfer from solution to the vapor state (Δ_sol^g H _m) can be obtained by multiplying the slope by the gas constant (R). A second plot correlates the enthalpies of transfer from solution to the vapor state (Δ_sol^g H _m), as measured by gas–liquid chromatography (GLC), with enthalpies of vaporization of reference materials (Δ_vap H _m at 298.15 K) available in the literature. C₉–C₁₅ fatty acid methyl esters and hydrocarbons were used as reference compounds. The enthalpies of vaporization of the cyclic organic peroxides were calculated from the equation of the line obtained in this second correlation, the slope of which was Δ_vap H _m (at 298.15 K)/Δ^g _sol H _m. The experiments were performed under isothermal conditions with a DB-5 capillary column, flame-ionization detection (FID), and nitrogen as carrier gas. The column temperature was varied over a range of at least 30–70 K between 403 and 473 K, with chromatograms being acquired at 10 K intervals. Enthalpies of vaporization of cyclic organic peroxides are not available in the literature, and the values given in this paper, obtained by gas chromatography, are the first to be reported.     

Heteroatom derivatives of indene: V. Vibrational spectra of benzimidazole

Infrared and Raman measurements for benzimidazole are presented and discussed, including its argon-matrix infrared spectrum. To assist in the assignment, benzimidazole's harmonic force fields for the 321G* and 631G* levels were scaled by scaled factors derived by fitting the respective computed force fields of other indene derivatives to previously reported experimental vibrational frequencies. Comparison to the best set of experimental wavenumbers, usually taken from the matrix, shows mean 321G* and 631G* deviations of 7.0 and 5.8 cm⁻¹ for the planar modes, and 14.0 and 6.8 cm⁻¹ for the nonplanar modes, respectively, with much of the error residing in imino-hydrogen group modes. Standard entropies are derived with the matrix wavenumbers and the methods of statistical mechanics. An attempt to determine standard entropies by calorimetric methods was unsuccessful. The triple-point temperature T_tp and enthalpy of fusion Δ¹_crH_m only are reported.     

The standard enthalpies of formation of some dibenzoannelated cycloalkanols

The heats of combustion of trans-9,10-bis-hydroxymethyl-9,10-dihydrophenanthrene, trans-5-hydroxymethyl-5,6-dihydro-7H-dibenzo[a,c]cyclohepten-6-ol, 5-hydroxymethyl-5,6-dihydro-7H-di-benzo[a,c]cycloheptene, 6-hydroxymethyl-5,6-dihydro-7H-dibenzo[a,c]cycloheptene, 5H-dibenzo-[a,d]cyclohepten-5-ol and 5H-10,11-dihydrodibenzo[a,d]cyclohepten-5-ol were measured by means of a Gallenkamp adiabatic bomb calorimeter. Uncertainties in the determination of the heats of combustion ranged between 0.2 and 0.3%. The enthalpies of formation and atomization for the six compounds were derived. The experimental values of the heats of atomization were compared with those calculated using the Allen–Skinner bond energy scheme. Conclusions about energetic contributions which stabilize the structure of the investigated compounds were drawn.     

Enthalpies of transfer of 2-methyl-2-propanol from water to mixtures of water with methanol,ethanol and 1,4-dioxane

The enthalpies of transfer of 2-methyl-2-propanol (TBA) from water to mixtures of water with methanol, ethanol and 1,4-dioxane have been measured. The data are considered in terms of recently developed theory, and it is found that the enthalpies of transfer can be reproduced quantitatively over most of the composition range in each solvent system. The parameters recovered from the analyses indicate that the net effect of TBA on the solvent structure is a breaking of solvent-solvent bonds and that TBA is preferentially hydrated in the aqueous alcohol systems, but randomly solvated in the water+1,4-dioxane system. It is also found that the model parameters for TBA solvation in the alcohol systems are independent of the alcohol.     

Formation enthalpies of rare earth titanate pyrochlores

High-temperature oxide melt solution calorimetry and Rietveld refinements of powder X-ray diffraction data were used to investigate the structure (Fd3m; Z=8) and energetics of a series of RE₂Ti₂O₇ (RE=Sm-Lu) compounds with the pyrochlore structure as well as La₂Ti₂O₇ with a layered perovskite-type structure. All of the RE-titanates were found to be stable in enthalpy with respect to their oxides. In the pyrochlore series, Lu₂Ti₂O₇ was least stable in enthalpy (ΔHf-ox at 298 K=−56.0±4.0 kJ/mol); the most stable materials were Gd-, Eu-, and Sm₂Ti₂O₇ with ΔHf-ox at 298 K=−113.4±2.7, −106.1±4.2, −115.4±4.2 kJ/mol, respectively. In general, as the radius ratio of the A- to B-site cations, R_A/R_B, decreases, the pyrochlore structure becomes less stable. The trend of ionic radius of the RE³⁺ cation vs. ΔHf-ox at 298 K is non-linear and approximately parallels the increasing “resistance” to ion-beam-induced amorphization as R_A/R_B decreases.     

Structural, spectral and thermal studies of N-2-(4-picolyl)- and N-2-(6-picolyl)-N′-(2-chlorophenyl)thioureas and N-2-(6-picolyl)-N′-(2-bromophenyl)thiourea

N-2-(4-picolyl)-N′-2-chlorophenylthiourea, 4PicTu2Cl, monoclinic, P2₁/c, a=10.068(5), b=11.715(2), β=96.88(4)°, and Z=4; N-2-(6-picolyl)-N′-2-chlorophenylthiourea, 6PicTu2Cl, triclinic, P-1, a=7.4250(8), b=7.5690(16), c=12.664(3) Å, =105.706(17), β=103.181(13), γ=90.063(13)°, V=665.6(2) ų and Z=2 and N-2-(6-picolyl)-N′-2-bromophenylthiourea, 6PicTu2Br, triclinic, P-1, a=7.512(4), b=7.535(6), c=12.575(4) Å, a=103.14(3), β=105.67(3), γ=90.28(4)°, V=665.7(2) ų and Z=2. The intramolecular hydrogen bonding between N′H and the pyridine nitrogen and intermolecular hydrogen bonding involving the thione sulfur and the NH hydrogen, as well as the planarity of the molecules, are affected by the position of the methyl substituent on the pyridine ring. The enthalpies of fusion and melting points of these thioureas are also affected. ¹H NMR studies in CDCl₃ show the NH′ hydrogen resonance considerably downfield from other resonances in their spectra.     

Standard enthalpy of formation of lithium diphosphate

Lithium carbonate (Li₂CO₃) and ammonium dihydrogen phosphate (NH₄H₂PO₄) were used for synthesizing lithium diphosphate (Li₄P₂O₇). The purity of the latter compound was checked up by X-ray diffraction. The heat of dissolution of (Li₄P₂O₇) in phosphoric acid solution was measured in a C-80 SETARAM calorimeter. Many dilution and mixing processes in acid solutions of several concentrations (w/w) H₃PO_4, were also realized in the calorimeter in order to get the standard enthalpy of formation of this product. Two thermochemical cycles were investigated and the obtained values for the enthalpy of formation are: (−3383.4 and −3147) kJ · mol⁻¹. The former one is in better agreement with literature data.     

Design and synthesis of new C-nucleosides as potential adenosine deaminase inhibitors

A number of new pyrazolo[3,4-c] and [4,3-b]pyridine C-nucleosides, which can be viewed as 4- or 6-deazaformycin analogues were synthesized and examined as potential adenosine deaminase (ADA) inhibitors. The compounds were prepared through the condensation of a suitably substituted, lithiated 2- or 4-methylpyridine with tri-O-benzyl-d-ribonolactone, followed by borohydride reduction of the resulting hemiacetals, intramolecular Mitsunobu cyclisation of the derived diols, formation of the pyrazolopyridine ring system and subsequent removal of the protecting groups. These derivatives were designed on the structural basis provided by docking simulations performed within the enzyme catalytic site, however they demonstrated weak ADA inhibitory activity. Theoretical calculations assisted in the interpretation of the obtained biological data, thus providing guidance for rational structural modifications within this molecular scaffold.     

Microemulsions: Effect of alkyl chain length of alcohol and alkane

In microemulsions consisting of four components, i.e. detergent — water — oil — cosurfactant, the free energy of transfer from the continuous oil phase to the interfacial region for the cosurfactant is reported. From the effect of temperature on the free energy, the entropy and the enthalpy values are also reported. The effect of chain length of the alcohol (cosurfactant) is also described. It is further shown, that if the oil phase consists of hexadecane, then the free energy changes as a linear function of the number of carbon atoms in the cosurfactant. On the other hand, if the oil phase is benzene, the cosurfactant chain length has very little effect. These data are analyzed with respect to the microemulsion structure and stability.