Molecular recognition properties of salicylic acid-imprinted polymers

Summary Two molecularly imprinted polymers (MIP) have been prepared using the acidic drug salicylic acid, which can form intramolecular hydrogen bond, as the template and acrylamide or 4-vinylpyridine as the functional monomer. HPLC was used to evaluate the binding performance of the MIP for the template and for several analogues. The results showed that the MIP (P₂) prepared using acrylamide as the functional monomer had no molecular imprinting effect whereas that (P₁) prepared using 4-vinylpyridine as the functional monomer had a significant molecular imprinting effect. The reason the molecular imprinting effect was different for the two MIP was elucidated and the molecular recognition properties of P₁ were studied in detail. It was confirmed that electrostatic interaction played an important role in the molecular recognition of P₁. Scatchard analysis showed that two types of binding site with distinctly different affinity were formed in P₁. Their dissociation constants were estimated to be 7.6×10⁻⁵ mol L⁻¹ and 3.2×10⁻³ mol L⁻¹, respectively. Because P₁ has high affinity and selectivity for salicylic acid not only in organic systems but also in water-containing systems, it gives P₁ the potential for use in the enrichment, separation, and detection of salicylic acid in biological fluids.     

Non isothermal heat capacities and chemical reactions using a modulated DSC

An evaluation of measurements of heat capacities by modulated differential scanning calorimetry, MDSC is presented. Heat capacities were obtained from 130 to 550 K by a non isothermal technique in which a periodic modulation was added to the linear heating rate. Effects of amplitude and period of modulation, sample weight, sample type, pan type, and cell imbalance are described. Results are compared with those obtained using the isothermal technique. Heat capacity could be measured well into the decomposition region and separated from the non reversing signal due to chemical reaction (degradation), thus allowing a precise detection of onsets of the thermal degradation. This additional information will aid in the interpretation of the degradation chemistry, a field vital for the petroleum-industry.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayPart of this paper was presented at the 23rd Conference of the North American Thermal Analysis Society, Toronto, Canada, September 25–28, 1994.The author (MVN) acknowledges the experimental assistance provided by J. Balogh of Exxon Research and Engineering Company, Linden. Helpful discussions with A. Boller of the University of Tennessee at Knoxville, Dr. Y. Jin, General Electrical, and Dr. S. Sauerbrunn formerly of TA Instruments are also acknowledged.     

A novel derivatisation procedure for inorganic mercury(II) for HPLC analysis

Summary A new procedure for derivatisation of inorganic mercury(II) to diphenylethynylmercury with simultaneous extraction into dichloromethane is proposed. The organomercury derivative is effectively analysed by HPLC using UV detection. The calibration curve is linear over three orders of magnitude (0.02–50 mg L^–1 Hg); the detection limit is 0.1 ng Hg. A preliminary study of the effect of potential interfering agents, in particular Cu(II), Zn(II), Cd(II), Pb(II), and cysteine, and applications of the present methodology to real environmental samples are presented.     

A Validated LC Method for Separation and Quantification of Voriconazole and Its Enantiomer

A simple liquid chromatographic method was developed for the separation and quantification of voriconazole and its enantiomer in drug substance. The separation was achieved on Chiral cel-OD (250 mm × 4.6 mm × 10 μm) using mobile phase consisting of n-hexane and ethanol in the ratio 9:1 (v/v) with a flow rate of 1.0 mL min⁻¹, at 27 °C column temperature and detection at 254 nm with an injection volume of 20 μL. Ethanol was used as diluent. The method is capable of detecting the (2S, 3R) enantiomer down to 0.0075% and can quantify down to 0.021% with respect to sample concentration. The method is rapid and the resolution achieved was about 3.0. This method can be employed for the quantification of (2S, 3R) enantiomer in voriconazole drug substance.     

Photovoltaic and spectral properties of tetraphenyloporphyrin and metallotetraphenyloporphyrin dyes

Spectroscopical properties and photocurrent (or photovoltage) of tetraphenyloporphyrins and metallotetraphenyloporphyrins in nematic liquid crystal have been studied. Photoelectric response has been measured in an electrochemical cell made of the semitransparent semiconducting and golden electrodes with porphyrin dyes embedded in liquid crystal. Fluorescence, time-resolved luminescence in microsecond time scale and photoacoustic spectra have also been measured. The competition between radiative, non-radiative processes and charge transfer is discussed. It has been shown that effectivity of porphyrins for photocurrent generation depends on the presence/absence of central metal in the macrocycle of porphyrin skeleton and the kind of metal. The schematic model of the contributions of the dye molecule and semiconducting electrode in the electron transfer process is shown.     

Monolayer films of PS-b-PEO diblock copolymers at the air/water- and an oil/water-interface

 Amphiphilic diblock copolymers consisting of a hydrophobic polystyrene block (PS) and a hydrophilic poly(ethylene oxide) block (PEO) with block sizes of 1000 or 3000 g/mol for both blocks were studied at the air/water and toluene/water interface. Measurements of the film pressure π of spread monolayers at the water surface reveal two limiting regimes of the π−a _m isotherms, in which the mean molecular area a _m is determined either by the size of the hydrophilic or the hydrophobic blocks of the PS-PEO molecules. The interfacial activity of the block copolymers at the toluene/water interface was studied by measuring the interfacial tension σ over a wide range of concentrations. Pronounced differences in the temperature dependence of the interfacial tension were observed, depending mostly on the block length of the hydrophilic PEO block. From the temperature dependence of σ it is inferred that for the block copolymers with the PEO block size of 3000 g/mol the phase inversion temperature (PIT) is well above 60 °C while for those with a PEO block size of 1000 g/mol the PIT is below or near 25 °C in the toluene/water system. Received: 5 February 1998 Accepted: 16 February 1998     

Comparative Evaluation of CE and HPLC for Determination of Cotinine in Human Urine

Two rapid and popular methods—capillary electrophoresis (CE) and high-performance liquid chromatography (HPLC) have been compared for analysis of cotinine in human urine. Cotinine was analyzed in less than 7 min, with detection limits of 5 and 3.2 ng mL⁻¹ for CE and HPLC, respectively. The performance of the methods was evaluated in terms of sensitivity, specificity, precision, accuracy, and limits of detection and quantification. Calibration plots were linear in the range 50–4,000 ng mL⁻¹, at least, and mean recoveries were satisfactory for both techniques. The methods were successfully used for quantification of cotinine in urine.     

Vapor pressure measurement for water,methanol, ethanol,and their binary mixtures in the presence of an ionic liquid 1-ethyl-3-methylimidazolium dimethylphosphate

Vapor pressure data were measured for water, methanol and ethanol as well as their binary mixtures with an ionic liquid (IL) 1-ethyl-3-methylimidazolium dimethylphosphate ([EMIM][DMP]) at varying temperature and IL-content ranging from mass fraction of 0.10–0.70 by a quasi-static method. The vapor pressure data for the IL-containing binary systems were correlated using NRTL equation with average absolute relative deviation (ARD) within 0.0076, and the binary NRTL parameters was used for predicting the vapor pressure of the IL-containing ternary systems with reasonable accuracy. In addition, the infinite activity coefficients of solvents in [EMIM][DMP] and isobaric vapor–liquid equilibrium for IL-containing ternary systems at 101.325 kPa and mass fraction of IL being 0.5 were predicted with the regressed NRTL parameters. The results indicate that ionic liquid [EMIM][DMP] can depress the volatility of the solvents of water, methanol and ethanol but to a varying degree, leading to the variation of relative volatility of a solvent and even removal of azeotrope for water–ethanol mixture.     

超高效液相色谱-三重四极杆质谱法测定血浆和尿液中马桑亭和马桑宁

建立了超高效液相色谱-三重四极杆质谱联用技术测定血浆和尿液中马桑中毒标志物马桑亭和马桑宁的方法。血浆和尿液样品经固相支持液液萃取法提取净化后，溶于15%（v/v）甲醇水溶液中，以Cortecs C₁₈色谱柱（100 mm×2.1 mm，1.6 μm）作为分析柱进行分离，电喷雾负离子多反应监测（MRM）模式下检测，以氟苯尼考作为内标物，基质工作曲线内标法定量。血浆和尿液中马桑亭和马桑宁的平均加标回收率为86.2%~110%，相对标准偏差为5.1%~14.6%（n=6），血浆中马桑亭和马桑宁的检出限（S/N=3）分别为0.01 μg/L和0.1 μg/L，尿液中马桑亭和马桑宁的检出限分别为0.03 μg/L和0.3 μg/L。本法简单、灵敏、准确，可用于血浆和尿液中马桑亭和马桑宁的中毒检测。     

An in situ STM study on the long-range surface restructuring of Au(1 1 1) in a non-chloroaluminumated ionic liquid

We report an in situ STM study of a potential-dependent long-range surface restructuring of Au(1 1 1) electrode in neat 1-butyl-3-methylimidazolium tetrafluoroborates (BMIBF₄) ionic liquid. Au(1 1 1) undergoes a significant long-range surface restructuring upon cathodic excursion to −1.0 V vs. Pt quasi-reference. The restructuring involves the formation of tiny pits, which then develops into a stable worm-like network with an average width of the network grids 2 nm. Electrochemical annealing occurs at the cathodic limit with the presence of a reduction product of cation BMI⁺. A smooth surface is recovered with the appearance of the typical (√3 × 22) reconstruction of Au(1 1 1). The surface restructuring is reestablished upon anodic excursion to −1.3 V after the adsorbed reduction product is oxidized. The long-range surface restructuring phenomenon is tentatively explained as a result of partial charge transfer to the weakly adsorbed BMI⁺, which reduces the metal–metal cohesive energy. In addition, the synergetic effect of the counter anion BF₄⁻ may also be involved. The results provide a knowledge of Au(1 1 1) electrode behavior in the neat ionic liquid and are beneficial to understanding in situ STM results involving surface morphological changes in such a media.