Site selection NMR study on electronic state in and near vortex core of YBa2Cu4O8

We report a site-selective ¹⁷O spin-lattice relaxation rate T₁⁻¹ in the vortex state of YBa₂Cu₄O₈. We found that T₁⁻¹ at the planar sites exhibits an unusual nonmonotonic NMR frequency dependence. Based on T₁⁻¹ in the vortex core region, we establish strong evidence that the local density of states within the vortex core is strongly reduced.     

Classical limit of relativistic quantal system with attractive Coulomb interaction

Using the appropriate harmonic oscillator states and reasonable approximations, we construct coherent wavepackets corresponding to the solutions of the Klein-Gordon equation for the attractive potentialV(r)=−k/r, k>0, in two and three space dimensions. We deduce the corresponding classical limit in two dimension by requiring that the expectation value 〈r〉 of the radial variable is large. In the case of three dimensions, besides the condition of large 〈r〉, we make the uncertainty Δr=[〈r ²〉 − 〈r〉²]^1/2 a minimum with respect to certain parameter of the wavepacket. We then investigate the trajectory traversed by the wavepacket in the classical limit. We find that the classical limit of this relativistic quantal problem gives, in the leading order, the same expression for the rate of motion of the perihelion as that given by the solution of the corresponding special relativistic classical dynamical problem. We also briefly discuss some of the subtle aspects of the classical limit of the relativistic quantal system, in general.     

A vibrationally compensated far infrared laser interferometer for plasma density measurements

A modulated far-infrared laser interferometer which is presently operating on the PDX experiment at Princeton is described. The interferometer geometry permits the characterization of inside D, outside D as well as circular discharges. To achieve this versatility, a titanium corner cube reflector, mounted inside the PDX vacuum vessel is used in conjunction with a second visible wavelength interferometer for vibration corrections. In addition, the use of room temperature quasi-optical Schottky diodes in the far-infrared interferometer is reported. The minimum detectable line average density of the system is 5×10¹¹ cm^–3.     

高压陡脉冲信号测量系统的补偿

本文针对高压陡脉冲测量过程中由于对地电容引起的波形畸变,介绍了一种电感补偿方法,这种补偿回路简便、可靠,可使测量系统的方波响应得到明显的改善。     

Research on front-end electronics gain compensation of MCP imaging detector北大核心CSCD

基于微通道板电子倍增电荷分割型阳极的成像探测器常用于行星大气、气辉等微弱信号探测。针对探测器读出电路增益不相等导致探测器成像产生畸变的问题,利用理论分析结合MATLAB仿真揭示了不同畸变图像的形成机制,在该基础上提出了一种探测器读出电路增益补偿方法减小探测器成像畸变。通过MATLAB仿真和实验测试结果表明该文提出的方法能够有效减小由于读出电路增益不相等导致的探测器成像畸变。     

X-ray absorption and Mössbauer spectra,and microwave absorption of (Co,Mn)-doped SrFe12O19 hexaferrites

Polycrystalline SrCo_1·2Fe_10·8O₁₉ (SCFO) and SrMn_1·2Fe_10·8O₁₉ (SMFO) samples were prepared by the normal ceramic technique. Powder X-ray diffraction patterns indicated the crystallization in the M-type hexaferrite structure of the samples. X-ray absorption analyses proved Co²⁺ and Mn^3+,4+ ions existing in SCFO and SMFO, respectively. Though Fe³⁺ is dominant in both the compounds, small amounts of Fe²⁺ and Fe⁴⁺ are present in SCFO and SMFO, respectively. Mössbauer spectra analyses also confirmed the dominance of Fe³⁺ in both the samples. Additionally, Fe³⁺ ions in the 12 k, 4f₁, 4f₂, and 2a sites could be attributed to the high-spin state (S = 5/2). A large QS value for the sextet assigned to the 2b site indicated that in this case Fe³⁺ could be in the low-spin state (S = 1/2) or there was the addition of Fe²⁺ (or Fe⁴⁺) when Fe in SrFe₁₂O₁₉ was partially replaced by Co²⁺ (or Mn^3+,4+). The mixture of transition-metal ions with different oxidation states influenced the magnetic properties and microwave shielding ability. At frequencies f = 10–18 GHz, we have found SCFO showing the lowest reflection loss with RL = −11.1 dB at 13.2 GHz and the thickness t = 2.2 mm. With an absorption bandwidth of 0.7 GHz, and about 92% microwave energy being absorbed, SCFO is considered as a potential candidate for microwave shielding applications.     

Experimental Study of Effect of Temperature Variations on the Impedance Signature of PZT Sensors for Fatigue Crack Detection

Structural health monitoring (SHM) is recognized as an efficient tool to interpret the reliability of a wide variety of infrastructures. To identify the structural abnormality by utilizing the electromechanical coupling property of piezoelectric transducers, the electromechanical impedance (EMI) approach is preferred. However, in real-time SHM applications, the monitored structure is exposed to several varying environmental and operating conditions (EOCs). The previous study has recognized the temperature variations as one of the serious EOCs that affect the optimal performance of the damage inspection process. In this framework, an experimental setup is developed in current research to identify the presence of fatigue crack in stainless steel (304) beam using EMI approach and estimate the effect of temperature variations on the electrical impedance of the piezoelectric sensors. A regular series of experiments are executed in a controlled temperature environment (25°C–160°C) using 202 V1 Constant Temperature Drying Oven Chamber (Q/TBXR20-2005). It has been observed that the dielectric constant ε₃₃^T which is recognized as the temperature-dependent constant of PZT sensor has sufficiently influenced the electrical impedance signature. Moreover, the effective frequency shift (EFS) approach is optimized in term of significant temperature compensation for the current impedance signature of PZT sensor relative to the reference signature at the extended frequency bandwidth of the developed measurement system with better outcomes as compared to the previous literature work. Hence, the current study also deals efficiently with the critical issue of the width of the frequency band for temperature compensation based on the frequency shift in SHM. The results of the experimental study demonstrate that the proposed methodology is qualified for the damage inspection in real-time monitoring applications under the temperature variations. It is capable to exclude one of the major reasons of false fault diagnosis by compensating the consequence of elevated temperature at extended frequency bandwidth in SHM.     

圆合成孔径声呐多点定位运动补偿

圆合成孔径声呐(CSAS)的成像性能受平台运动误差影响而下降,利用单侧回波可估计CSAS基阵的斜距误差,但单侧回波在小测绘带时无法估计升沉误差,针对此问题,提出了一种利用单侧回波信号的声呐平台三维运动估计和补偿方法。首先,对CSAS在不同观测角度的目标回波取极大值获得目标回波的到达时间;其次,基于多个点目标的到达时间建立CSAS三维定位模型;然后利用列文伯格-马夸尔特方法对声呐三维坐标进行估计;最后将位置估计结果与时域反投影成像方法结合实现对目标的成像.仿真结果表明:该方法能精确估计声呐平台运动误差,其空间坐标的估计误差小于仿真信号波长的1/8,从而精确补偿了CSAS在不同空间采样点上的阵元回波时间差,显著提高了目标成像质量。湖上试验结果表明,该算法能够实现对CSAS的运动误差补偿。仿真和试验结果均验证了方法的可行性和有效性。     

Nondestructive monitoring,kinetics and antimicrobial properties of ultrasound technology applied for surface decontamination of bacterial foodborne pathogen in pork

In this study, electronic nose (E-nose) and Hyperspectral Imaging (HSI) was employed for nondestructive monitoring of ultrasound efficiency (20KHZ) in the inactivation of Salmonella Typhimurium, and Escherichia coli in inoculated pork samples treated for 10, 20 and 30 min.Weibull, and Log-linear model fitted well (R² ≥ 0.9) for both Salmonella Typhimurium, and Escherichia coli inactivation kinetics. The study also revealed that ultrasound has antimicrobial effects on the pathogens. For qualitative analysis, unsupervised (PCA) and supervised (LDA) chemometric algorithms were applied. PCA was used for successful sample clustering and LDA approach was used to construct statistical models for the classification of ultrasound treated and untreated samples. LDA showed classification accuracies of 99.26%,99.63%,99.70%, 99.43% for E-nose - S. Typhimurium, E-nose -E. coli, HSI - S. Typhimurium and HSI -E. coli respectively. PLSR quantitative models showed robust models for S. Typhimurium- (E-nose Rp² = 0.9375, RMSEP = 0.2107 log CFU/g and RPD = 9.7240 and (HSI Rp² = 0.9687 RMSEP = 0.1985 log CFU/g and RPD = 10.3217) and E. coli -(E-nose -Rp² = 0.9531, RMSEP = 0.2057 log CFU/g and RPD = 9.9604) and (HIS- Rp² = 0.9687, RMSEP = 0.2014 log CFU/g and RPD = 10.1731).This novel study shows the overall effectiveness of applying E-nose and HSI for in-situ and nondestructive detection, discrimination and quantification of bacterial foodborne pathogens during the application of food processing technologies like ultrasound for pathogen inactivation.