Density functional calculations of NMR chemical shifts and ESR g-tensors

An overview is given on recent advances of density functional theory (DFT) as applied to the calculation of nuclear magnetic resonance (NMR) chemical shifts and electron spin resonance (ESR) g-tensors. This is a new research area that has seen tremendous progress and success recently; we try to present some of these developments. DFT accounts for correlation effects efficiently. Therefore, it is the only first-principle method that can handle NMR calculations on large systems like transition-metal complexes. Relativistic effects become important for heavier element compounds; here we show how they can be accounted for. The ESR g-tensor is related conceptually to the NMR shielding, and results of g-tensor calculations are presented. DFT has been very successful in its application to magnetic properties, for metal complexes in particular. However, there are still certain shortcomings and limitations, e.g., in the exchange-correlation functional, that are discussed as well. Received: 24 October 1997 / Accepted: 19 December 1997     

EPR parameters and local geometry for Cr3+ and V2+ ions in HfS2 crystals

From the high-order perturbation formulas of EPR parameters (zero-field splitting D, g factors gparallel, gperpendicular and hyperfine structure constants Aparallel, Aperpendicular) based on the two spin-orbit coupling parameter model for 3d3 ions in trigonal symmetry, the EPR parameters of Cr3+ and V2+ ions in HfS2 crystals are calculated. From the calculations, it is found that the local trigonal distortion angle theta of impurity center in HfS2:Cr3+ is smaller than that in HfS2:V2+. The dominant cause of the small zero-field splitting |D| and g-anisotropy |Deltag|=|gparallel-gperpendicular| in HfS2:Cr3+ (compound to HfS2:V2+) is due to the small local trigonal distortion angle theta rather than to the small impurity-ligand distance R in HfS2:Cr3+.     

Crystal structure of the parent misfit-layered cobalt oxide [Sr2O2]qCoO2

The crystal structure of our newly discovered Sr-Co-O phase is investigated in detail through high-resolution electron microscopy (HREM) techniques. Electron diffraction (ED) measurement together with energy dispersive X-ray spectroscopy (EDS) analysis show that an ampoule-synthesized sample contains an unknown Sr-Co-O ternary phase with monoclinic symmetry and the cation ratio of Sr/Co=1. From HREM images a layered structure with a regular stacking of a CdI₂-type CoO₂ sheet and a rock-salt-type Sr₂O₂ double-layered block is observed, which confirms that the phase is the parent of the more complex “misfit-layered (ML)” cobalt oxides of [M_mA₂O_m+2]_qCoO₂ with the formula of [Sr₂O₂]_qCoO₂, i.e. m=0. It is revealed that the misfit parameter q is 0.5, i.e. the two sublattices of the CoO₂ sheet and the Sr₂O₂ block coexist to form a commensurate composite structure. We propose a structural model with monoclinic P2₁/m symmetry, which is supported by simulations of ED patterns and HREM images based on dynamical diffraction theory.     

Coupling matrix element of electron self-exchange reactions in solution

On the basis of the common feature among the electron transfer process and the ion hydration process as well as the relevant experimental kinetic data of electron transfer reaction,a new accurate hydration potential function scheme for the determination of electron transfer coupling matrix element is presented.The coupling matrix element between two hydrated ions of the reacting system in solution is calculated.The results and the applicability of this scheme are discussed.     

Multidimensional separation of isomeric species of chlorinated hydrocarbons such as PCB,PCDD, and PCDF

A multidimensional GC-system containing two capillary columns of different polarities, operated within a double oven instrument, was used for the optimized separation of complex isomeric mixtures of various types of chlorinated aromatic compounds such as PCB, PCDD, or PCDF. Electron capture was applied parallel to flame ionization detection to obtain sensitive signals of the PCB or PCDD and the n-alkane standards required for identification by Kovats indices, respectively. Electron capture detection within a valvelessly operated MDGC system forced changes in the usual instrumental set-up, the live-switching coupling piece being located within the second oven of the double oven instrument. This oven is operated isothermally to ensure optimal and interference-free detection, for stable flow conditions within the coupling piece and for the determination of the isothermal retention indices (Kovats), which are much more suitable for identification by retention than the so-called “linear” indices.     

Influence of silica fillers during the electron irradiation of DGEBA/TETA epoxy resins, part II: Study of the thermomechanical properties

This work describes the influence of silica fillers on the thermomechanical properties of diglycidyl ether of bisphenol A/triethylenetetramine (DGEBA/TETA) epoxy resins during ageing under electron beam irradiation. Whatever be the silica filler (pure micrometric ground and spherical silicas, nanometric silicas and coupling agent treated silicas), the glass transition temperature of the epoxy resins decreases with increasing irradiation dose, meaning that the main effect of the irradiation is chain scission. No influence of the silica fillers has been detected from the changes in the glass transition temperature with the increase in the irradiation dose. The disappearance of the cooperativity of the γ relaxation, the decrease of the α relaxation and the decrease of the elastic modulus at the rubbery plateau observed by dynamic mechanical analyses involve a decrease in the crosslink density of the epoxy resins. The occurrence of chemical reactions between the epoxy resin and the silica surface at high irradiation doses has been shown. Moreover, we show evidence that chemical reactions between the epoxy resin and the silica surface occur at high irradiation dose.     

应用扫描电化学显微镜研究电子在室温离子液体与1,2-二氯乙烷混合溶液/水相界面上的转移反应

应用扫描电化学显微镜研究了室温离子液体(Omim·Tf2N)与1,2-二氯乙烷(DCE)混合溶液/水界面上的电子转移反应. 在保持共同离子(Tf2N-)的浓度比恒定及异相电子转移反应由界面电势差所决定的条件下, 研究了离子液体和DCE混合溶液中二茂铁(Fc)与水相中亚铁氰化钾[K4Fe(CN)6]之间异相电子转移反应. 探讨了混合溶液中离子液体的体积分数(xRTIL)的变化对混合溶液/水界面上电子转移反应的影响. 结果表明, 随着xRTIL的减小(从1减小到0.1), Fc在混合溶液中的扩散系数单调递增(从2.730×10-7 cm2·s-1增加到9.131×10-6 cm2·s-1); 而异相电子转移反应速率常数(k)则先逐渐减小(从8.0 mol-1·cm·s-1减小到0.32 mol-1·cm·s-1), 之后又略有增大(从0.32 mol-1·cm·s-1增大到0.48 mol-1·cm·s-1). 对这种现象可能的原因进行了较详细探讨.     

偶氮苯自组装单分子膜中长程电子转移机理

利用自组装技术在金电极表面构造了具有不同前端健长度偶氮苯功能化的单分子膜体系：Au／S（CH2）nNHCO-N＝N-OCH2CH3（n＝2，3，4，6）．研究结果表明，仍氮苯到金电极的表现电子转移速率随它们之间的距离长度的增加而呈指数性的下降趋势．基于Marcus电子隧穿理论，得到了此自组装膜体系的长程电子隧穿系数ρ＝（1．35±0．2）／CH2在和可逆电活性分子自组装膜体系及理论计算相比较的基础上，从偶氮苯分子自组装膜结构与电子转移过程的关系角度对这一结果进行了分析和说明．     

Cationic polymerization of dienes VII. New electron donors in the polymerization of 1,3-pentadiene initiated by aluminum trichloride in non-polar solvent

The aim of this research was to investigate new bulky electron donors (EDs) generating hindered active species in the cationic polymerization of 1,3-pentadiene initiated by AlCl₃ in pentane, in order to avoid or strongly reduce the reaction between the active species and the double bonds of the polymer which are responsible for side reactions. At room temperature, the polymerization in the presence of new ED, such as OPh₂, N(PhBr)₃, NPh₃ and SPh₂, allowed to obtain higher conversions and lower insoluble fractions than without electron donor. The formation of a complex ED/AlCl₃ was shown for each electron donor. However, in the case of NPh₃ and SPh₂, variations of the polymer microstructure demonstrated an interaction between active species and these EDs. Similar results were obtained at lower temperature (−10 °C). The beneficial effect of the presence of electron donors such as NPh₃ and SPh₂ demonstrated the validity of the concept of sterically hindered active species, but the polymerization was still uncontrolled.