Beiträge zur Chemie der Pyrrolpigmente, 78. Mitt.: Die Eigenschaften desb-Nor-bilatrien-abc-b-Nor-biladien-ac-Systems

The redox coupleb-nor-biladiene-ac (2)/b-nor-bilatriene-abc (3) exhibits an oxidative half wave potential of 800 mV in acetonitrile solution. It is demonstrated that it can be used as an extremely efficient electron carrier through bulk membranes. Whereas2 is not suitable as a ligand in carrier mediated cation transport,3 is a medium suited carrier for Cu(II) or Zn(II) ions, however, it is the most efficient one found so far for transport of Hg(II) ions. A 1:1 zinc chelate of3 is isolated and characterized. it is deduced to represent a polymer consisting of about 73 monomer units.

     

Structural and magnetic properties of the solid solution () YMn1−x(Cu3/4Mo1/4)xO3

Recently, the ferroelectromagnet YMnO₃ has been the focus of interest because it exhibits both antiferromagnetism (Néel temperature 80 K) and ferroelectricity (Curie temperature 914 K). There have been no reports of complete YMn_1−xM_xO₃ solid solutions in which substitution of the foreign M cation preserves the hexagonal P6₃cm structure. In contrast there exist several homeotypic phases with the general formula, Ln_1+nCu_nMO_3+3n (n=1 (M=Ti), 2 (M=V) and 3 (M=Mo); Ln: lanthanide). Several YMn_1−x(Cu_3/4Mo_1/4)_xO₃ compounds have been synthesized. The solid solution, from YMnO₃ (x=0) to YCu_3/4Mo_1/4O₃ (x=1) has been characterized by X-ray diffraction and transmission electron microscopy study. For 0<x<0.9, the compounds are found to crystallize in the non-centrosymmetric structure, space group P6₃cm, of YMnO₃. The Mn-free end member, x=1, crystallizes in a complex multiple cell, the superstructure being associated to Cu³⁺/Mo⁶⁺ cationic ordering. Dilution of the Mn³⁺ magnetic array by the paramagnetic (Cu²⁺) and diamagnetic (Mo⁶⁺) cations is found to decrease the antiferromagnetic ordering temperature and it becomes undetectable for x0.5 compositions.     

Iron(III) chloride catalysed three-component Grieco condensation: Synthesis of tetrahydropyrido[2′,3′:3,4]pyrazolo[1,5-a]pyrimidines/quinazolines

Three-component Grieco condensation reaction of 3-aminopyrazolo[3,4-b]pyridine, formaldehyde/benzaldehyde and electron rich alkenes in presence of iron(III) chloride gave tetrahydropyrido[2′,3′:3,4]pyrazolo[1,5-a]pyrimidines/quinazolines in single pot. The sequence of reactions is formation of di-azadiene in situ and the subsequent regioselective addition of alkenes in aza-Diels Alder type reaction. The structure and stereochemistry of the products were confirmed by spectral data and single crystal X-ray crystallography.     

Synthesis and crystal structure of the palladium oxides NaPd3O4, Na2PdO3 and K3Pd2O4

NaPd₃O₄, Na₂PdO₃ and K₃Pd₂O₄ have been prepared by solid-state reaction of Na₂O₂ or KO₂ and PdO in sealed silica tubes. Crystal structures of the synthesized phases were refined by the Rietveld method from X-ray powder diffraction data. NaPd₃O₄ (space group Pm3¯n, a=5.64979(6) Å, Z=2) is isostructural to NaPt₃O₄. It consists of NaO₈ cubes and PdO₄ squares, corner linked into a three-dimensional framework where the planes of neighboring PdO₄ squares are perpendicular to each other. Na₂PdO₃ (space group C2/c, a=5.3857(1) Å, b=9.3297(1) Å, c=10.8136(2) Å, β=99.437(2)°, Z=8) belongs to the Li₂RuO₃-structure type, being the layered variant of the NaCl structure, where the layers of octahedral interstices filled with Na⁺ and Pd⁴⁺ cations alternate with Na₃ layers along the c-axis. Na₂PdO₃ exhibits a stacking disorder, detected by electron diffraction and Rietveld refinement. K₃Pd₂O₄, prepared for the first time, crystallizes in the orthorhombic space group Cmcm (a=6.1751(6) Å, b=9.1772(12) Å, c=11.3402(12) Å, Z=4). Its structure is composed of planar PdO₄ units connected via common edges to form parallel staggered PdO₂ strips, where potassium atoms are located between them. Magnetic susceptibility measurements of K₃Pd₂O₄ reveal a Curie-Weiss behavior in the temperature range above 80 K.     

Oxidation products of the niobium tungsten oxide Nb4W13O47: A high-resolution scanning transmission electron microscopy study

Nb₄W₁₃O₄₇, a member of the solid solution series Nb_8−nW_9+nO₄₇ (0?n?5), crystallizes in a threefold superstructure of the tetragonal tungsten bronze structure. While the oxidation of this reduced phase at T_OX=1200 °C leads to a separation into the thermodynamically stable phases, lower oxidation temperatures result in products that comprise new structural elements and ordering variants. The characterization of the oxidation products obtained at T_OX=1000 °C was performed by scanning transmission electron microscopy applying a high-angle annular dark field detector. At the selected imaging conditions (Z contrast), not only the metal positions are revealed by this technique but valuable additional information about the elemental distribution can be obtained simultaneously.     

Electron transfer from dibenzo[b,f]-1-azapentalene dianion: Attempted synthesis of dibenzo[b,f]-1-azapentalene

When dibenzo[b,f]-1-azapentalene dianion (3) was allowed to react with either iron (III) chloride or ethylene bromide, a one-electron transfer from3 took place readily to give the radical anion11. Further electron transfer from11 did not occur presumably due to the antiaromatic character of dibenzo[b,f]-1-azapentalene (1) that would have resulted. The radical anion11 underwent further transformation by hydrogen abstraction from the solvent to give 5,10-dihydroindeno[1,2-b]indole (2) and by dimerization to themeso and (R,S) isomers of 5,5,10,10-tetrahydro-10,10-biindeno[1,2-b]indole (4 a and4 b) respectively.

---

Elektronentransfer von Dibenzo[b,f]-1-azapentalen-Dianion: Ein Versuch zur Synthese von Dibenzo[b,f]-1-azapentalen

Zusammenfassung Die Reaktion von Dibenzo[b,f]-1-azapentalen-Dianion (3) mit Eisen (III) oder Ethylenbromid ergab einen Ein-Elektronentransfer zum Radikalanion11. Ein weiterer Elektronentransfer fand nicht statt, vermutlich wegen des antiaromatischen Charakters von Dibenzo[b,f]-1-azapentalen (1), das dabei entstehen müßte. Das Radikalanion11 ergab unter Wasserstoffentzug aus dem Lösungsmittel 5,10-Dihydroindeno[1,2-b]indol (2), das weiter zummeso- bzw. (R,S)-5,5,10,10-tetrahydro-10,10-biindeno[1,2-b]indol (4 a bzw.4 b) dimerisierte.

     

Molecular structure of 3-methylthiophene studied by gas electron diffraction combined with microwave spectroscopic data

The molecular structure of 3-methylthiophene

has been determined by gas electron diffraction (GED) combined with microwave (MW) spectroscopic data. Ab initio calculations at the HF/3–21G* level were carried out and used as structural constraints in the data analysis. The torsional vibration of the methyl group was treated as a large-amplitude motion. The structural parameters were determined to be: r_g(S---C₂) = 1.719(2) Å, r_g(C₂=C₃) = 1.370(3) Å, r_g(C₃---C₆) = 1.497(6) Å, r_g(C₂---H) = 1.101(5) Å, CSC = 91.6(2)°, SC₂C₃ = 113.3(5)°, SC₅C₄ = 111.3(3)°, C₂C₃C₆ = 123.2(11)° and C₃C₆H = 112(2)°. The values of r(S---C₂) − r(S---C₅) and r(C₂=C₃) − r(C₄=C₅) were fixed at the 3–21G* value of 0.002Å. Parenthesized values are the estimated limits of error (3σ) referring to the last significant digit.     

Molecular structure of 3-methylthiophene studied by gas electron diffraction combined with microwave spectroscopic data

The molecular structure of 3-methylthiophene has been determined by gas electron diffraction (GED) combined with microwave (MW) spectroscopic data. Ab initio calculations at the HF/3–21G* level were carried out and used as structural constraints in the data analysis. The torsional vibration of the methyl group was treated as a large-amplitude motion. The structural parameters were determined to be: r_{g(S---C2) = 1.719(2) Å}, r_{g(C2=C3) = 1.370(3) Å}, r_{g(C3---C6) = 1.497(6) Å}, r_{g(C2---H) = 1.101(5) Å}, CSC = 91.6(2)°, SC₂C₃ = 113.3(5)°, SC₅C₄ = 111.3(3)°, C₂C₃C₆ = 123.2(11)° and C₃C₆H = 112(2)°. The values of r(S---C₂) - r(S=C₅) and r(C₂=C₃)-r(C₄ =C₅) were fixed at the 3–21G* value of 0.002 Å. Parenthesized values are the estimated limits of error (3σ) referring to the last significant digit.     

Electronic structures of 4d transition metal monoxides by density functional theory

Bond distances, dissociation energies, ionization potentials and electron affinities of 4d transition metal monoxides from YO to CdO and their positive and negative ions were studied by use of density functional methods B3LYP, BLYP, B3PW91, BPW91, B3P86, BP86, SVWN, MPW1PW91 and PBE1PBE. It was found that calculated properties are highly dependent on the functionals employed, especially for dissociation energy. For most neutral species, pure density functionals BLYP, BPW91 and BP86 have good performance in predicting dissociation energy than hybrid density functionals B3LYP, B3PW91 and B3P86. In addition, BLYP gives the largest bond distance compared with other density functional methods, while SVWN gives shortest bond distance, largest dissociation energy and electron affinity. For the ground state, the spin multiplicity of the charged species can be obtained by ± 1 of their corresponding neutral species.     

Average electron momenta in many-electron atoms

In many-electron atoms, the average electron momentum p represents the mean momentum of a single electron when all the electron motions are averaged. If any two electrons are considered simultaneously, however, the average momentum p splits into two different momenta, low momentum p_< and high momentum p_>. For the 102 atoms He through Lr in their ground states, the momenta p_< and p_> are systematically examined at the Hartree–Fock limit level. It is also shown that the sum p_>+p_< and the difference p_>–p_< of the two momenta constitute upper and lower bounds to the electron-pair relative momentum p₁₂=|p₁–p₂| and to the electron-pair center-of-mass momentum P=|p₁+p₂|/2. The tightness of the bounds is discussed for the 102 atoms.