Catecholamine release from cultured bovine adrenal medullary chromaffin cells in the presence of 60-Hz magnetic fields

Effects of powerline frequency (50/60 Hz) electric and magnetic fields on the central nervous system may involve altered neurotransmitter release. This possibility was addressed by determining whether 60-Hz linearly polarized sinusoidal magnetic fields (MFs) alter the release of catecholamines from cultured bovine adrenal chromaffin cells, a well-characterized model of neural-type cells. Dishes of cells were placed in the center of each of two four-coil Merritt exposure systems that were enclosed within mu-metal chambers in matched incubators for simultaneous sham and MF exposure. Following 15-min MF exposure of the cells to flux densities of 0.01, 0.1, 1.0 or 2 mT, norepinephrine and epinephrine release were quantified by high-performance liquid chromatography (HPLC) coupled with electrochemical detection. No significant differences in the release of either norepinephrine or epinephrine were detected between sham-exposed cells and cells exposed to MFs in either the absence or presence of Bay K-8644 (2 microM) or dimethylphenylpiperazinium (DMPP, 10 microM). Consistent with these null findings is the lack of effect of MF exposure on calcium influx. We conclude that catecholamine release from chromaffin cells is not sensitive to 60-Hz MFs at magnetic flux densities in the 0.01-2 mT range.     

粉煤灰与几种酸固相反应特性的表面分析

用扫描电镜．能量色散谱研究了粉煤灰与酸的固相反应过程中表面形貌和化学组成变化特性。室温下粉煤灰分别与HCI、HNO3、H2SO4、HCIO4固相反应后，表面产生直径20—200nm的结晶颗粒或晶柱。反应生成的水溶物结晶体的扫描电镜图像分别呈手指状、龟背形、蛛蛛状、蝙蝠态，分别为氯化铝铁混晶、硝酸铝铁混晶、硫酸铝铁混晶和高氯酸铝铁混晶。粉煤灰是硅、铝、铁等元素的氧化物聚集体，铁铝等氧化物主要分布在颗粒表面，氧化硅主要分布在颗粒内层。用少量酸进行固相反应这些氧化物聚集体可相互剥离，用H2SO4处理粉煤灰优先将铁铝氧化物转化成可溶性硫酸盐。     

Nuclear‐Spin Polarization in Electron‐Transfer Reactions of Amines

Chemically induced dynamic nuclear polarization (CIDNP) observed during electron transfer (ET) reactions of tertiary amines such as DABCO ( 1 ) or Et₃N ( 2 ) with a wide range of electron acceptors support the involvement of amine radical‐cations (e.g., 1^{. +} or 2^{. +} ) as key intermediates. Radical ions such as 2^{. +} may be deprotonated, generating neutral aminoalkyl radicals (e.g., 2^. ). When generated by reaction with an electron acceptor of energetically low triplet state such as naphthalene (¹Naph*), the resulting pair 2^{. +} /Naph^.? reacts mostly by reverse electron transfer (RET) from triplet pairs populating the naphthalene triplet state.     

Development and validation of an analytical methodology for the determination of p,p′-DDT, p,p′-DDE and p,p′-DDD in fish oil pills

An analytical methodology was proposed and validated to be applied to the determination of p,p′-DDT and its metabolites p,p′-DDE and p,p′-DDD in fish oil. The analytical procedure presented in this paper involves a single-step clean up process prior to the analysis. A solution of 1,2,3,4-tetrachloronaphtalene was used as internal standard.The analytical technique used was gas chromatography coupled to an electron capture detector. Details on the validation process are provided.The limits of detection ranged from 2.6 to 4.7 pg μL^− 1. The BCR 598 standard reference material (cod liver oil) was used to evaluate the performance of the methodology with satisfactory recoveries for all the compounds.The analytes were determined in three different fish oil pills sold in Spain as a supplementary vitamin support. The sum of p,p′-DDT and metabolites was from 13.2 to 51.3 ng g^− 1, the dominant compound being p,p′-DDE.     

Benefits of X-Ray Spectrum Simulation at low Energies

 There are particular benefits in spectrum simulation for the interpretation of characteristic X-ray peaks below about 2 keV in energy, where peak overlaps, a sloping background and changing detector efficiency make it difficult to measure true peak intensities. Despite these difficulties, we have shown that a useful accuracy of simulation is possible without major revision of the existing theory, allowing the electron microprobe user to compare on-line a measured spectrum with one synthesised from an assumed sample composition. As part of a wider study, we have used a database of X-ray spectra from 150 samples of known composition to confirm the accuracy of simulation over the energy range from 0.28–1.9 keV, finding an RMS error of better than 8%. The database included 181 Kα, Lα and Mα peaks from elements of atomic number 6–77, excited by beam voltages from 5–30 kV. Central to the method is the use of the ratio of (Peak Intensity)/(Total Background Intensity), which allows spectra to be compared from instruments of differing collection efficiency, thereby easing the collection of data over a wide range of conditions. Examples are given to illustrate the use of the simulator in helping to choose the best conditions for analysis, and as an aid in interpreting the spectra so obtained. Both modes of operation are iterative in nature and require a fast and accurate simulator that is easy to use. Further development will be guided by experience in its use.     

Electron impact induced fragmentation of aromatic N-alkoxy-imines I. Ring closure in (M-CH2O)+• ions by intramolecular aromatic substitution

Summary N-Butoxy- and N-propoxy-imines derived fromo-,m-, andp-substituted benzaldehydes (X = F, Cl, Br, I) decompose upon electron impact to the respective aldoximes by loss of C _n H_2n and competitivelyvia 1,5-distonic radical cations by loss of CH₂O to 1,3-distonic ions which eliminate H and/or a halogen atom in the course of homolytic aromatic substitution, giving rise to cyclic (M-CH₂O-H)⁺ or (M-CH₂O-X )⁺ ions.Dedicated with warm regards to Prof. Dr.D. Seebach, Zürich, on the occasion of his 60^th birthday     

Exploiting non-abelian point group symmetry in direct two-electron integral transformations

Summary A simple and general scheme to exploit any discrete point group symmetry in two-electron integral transformations is introduced. It has been implemented together with integral pre-screening techniques in direct two-electron integral transformations. Its application has also been extended to subsequent MO integral processing steps like MP2 or solution of the coupled-perturbed Hartree-Fock equations (CPHF). Timings for representative applications are presented.     

PVC DISULFIDE AS CATHODE MATERIALS FOR SECONDARY LITHIUM BATTERIES

PVC disulfide (2SPVC) was synthesized by solution crosslink and its molecular structure was confirmed by infrared spectrum. 2SPVC's specific area is 36.1 m2·g-1 tested by stand BET method, and granularity experiment gives out the particle size of d0.5= 11.3μm. With SEM (Scanning Electron Microscope) experiment the surface morphology and particle shape of 2SPVC were observed. Cyclic voltammetry (scan rate: 0.5 mV·s-1) shows that 2SPVC experience an obvious S-S redox reaction in charge-discharge process. When 2SPVC was used as cathode material for secondary lithium battery in a 1 mol·L-1 solution of lithium bis(trifluoromethylsulfonyl) imide (Li(CF3SO2)2N) in a 5:45:50 volume ratio mixture of o-xylene (oxy), diglyme (DG) and dimethoxymethane (DME) at 30℃, the first discharge capacity of 2SPVC is about 400.3 mAh·g-1 which is very close to its theoretical value (410.5 mAh·g-1) at a constant discharge current of 15 mA·g-1. It can retain at about 346.1 mAh·g-1 of discharge capacity after 30 charge-discharge cycles. So 2SPVC is a very promising cathode candidate for rechargeable lithium batteries.     

Electron microprobe analysis of micro amount powder samples: A case study on high purity coal

For the major, minor and trace element analysis of the inorganic compounds of a Ruhr-Saar coal different preparation techniques are investigated with X-ray fluorescence analysis, electron microprobe and classical wet chemical methods minimizing sample weight at standard preparation times and analytical accuracies. Considering accuracy as well as preparation efforts, determinations by electron microprobe on small sample amounts (<50 mg) proved to be superior to the other methods.Abbreviations AAS atomic absorbtion spectrometry - EMA electron microprobe analysis - IC ion chromatography - ISE ion sensitive electrode - PHOT photometry - WCA wet chemical analysis - XRF X-ray fluorescence analysis - LTA low temperature plasma ashing - HTA high temperature ashing - l.o.i. loss on ignition     

Polymeric flocculants processing by accelerated electron beams and microwave heating

Results obtained by accelerated electron beam, microwave and simultaneous microwave and electron beam application in the chemistry of acrylamide and acrylic acid copolymers (polymeric flocculants used for wastewater treatment) are presented. Comparative results concerning the molecular weight and Huggins’ constant for the acrylamide and acrylic acid copolymers obtained by classical heating, microwave heating, electron beam irradiation and simultaneous microwave and electron beam treatment are reported. Microwave heating produces high water solubility of the polymeric flocculants but median molecular weight values. Electron beam irradiation gives high molecular weight values but associated with a cross-linked structure (poor water solubility) while microwave energy addition to electron beam energy gives simultaneously high molecular weight values and high water solubility.