Solid state phase equilibria in the Gd-Si-B system at 1270 K

Solid state phase equilibria in the ternary Gd-Si-B phase diagram have been proposed at 1270 K using X-ray diffraction, scanning electron microscopy and electron probe microanalysis. Prior to this work, the binary systems Gd-B, Gd-Si and Si-B have also been reinvestigated. The main characteristic of the ternary diagram is the occurrence of two new ternary compounds Gd₅Si₂B₈ and Gd₅Si₃B_0.64. The former crystallizes in tetragonal symmetry, space group P4/mbm with unit cell parameters a=7.2665(3), c=8.2229(7) Å, the second one presents hexagonal symmetry, space group P6₃/mcm with unit cell parameters a=8.5080(4),c=6.4141(2) Å. The X-ray structures of the two structurally related phases Gd₅Si₃B_0.64 and host binary Gd₅Si₃ have been refined from three-dimensional single-crystal intensity data to the final R values of 0.036 (R_w=0.046) and 0.046 (R_w=0.055) for 457 and 401 reflections, respectively with [F>4σ(F)]. Both structures exhibit the Mn₅Si₃-type structure, with in addition for Gd₅Si₃B_0.64 a partial occupancy by boron of the normally vacant interstitial site at the center of the Gd₆ octahedron, which corresponds to the origin of the unit cell. Bonding between the interstitial boron atoms and the gadolinium ones forming the Gd₆B polyhedra is indicated by the decrease in the corresponding Gd-Gd distances and consequently in the unit cell volume. Finally, the Gd-Si-B phase diagram is compared with the previously reported Er-Si-B, at 1070 K.     

利用光热偏转技术实施光学薄膜弱吸收的多波长测量

介绍了光热表面形变光束偏转技术用于测量光学薄膜弱吸收的基本原理,简述多波长吸收测量装置的建立和测试过程,最后给出简单的测量实例.     

Electron diffraction investigation of PPTA/nylon 3T blends from shear-oriented anisotropic solutions

Nematic solutions of PPTA and nylon 3T were prepared in H₂SO₄ Optical microscopy was used to ascertain the phase behaviour of the blends. In the studied concentration range, no phase separation was observed. The solutions were shear-oriented and coagulated, and the resulting samples were studied by x-ray and electron diffraction. Nylon 3T crystallised even at a low concentration, which is indicative of a phase separation. Electron diffraction investigations of the oriented samples showed that well-oriented areas, which were predominantly composed of PPTA, adjoined areas where the major component, nylon 3T, showed no orientation. The relative proportion of the unoriented areas increased with increasing nylon concentration. It was concluded that, upon coagulation, the nylon was segregated into separate phases and crystallised unoriented, whereas for PPTA, crystallisation proceeded with very little chain rearrangement therefore preserving the orientation.     

Effect of gamma irradiation with or without hot water dip and transportation from Thailand to Canada on nutritional qualities, ripening index and sensorial characteristics of Thai mangoes (Nahng Glahng Wahn variety)

Two lots of mangoes of the Nahng Glahng Wahn variety from Thailand were irradiated at the Thai Irradiation Center (TIC) at 0.49 to 0.77 kGy. Following this, one batch was retained in Thailand while the other was shipped to the Canadian Irradiation Center (CIC) for investigation of the same variables during storage. This way, it was hoped to compare the effects of gamma radiation with hot water dip (HWI) or without (I) before and after transportation on the ripening, vitamin C and vitamin A content and sensory qualities of mangoes. The results indicate that the I and HWI treatments delayed the ripening of the mangoes. The irradiated groups appeared to have a slightly higher content of ascorbic acid on the first day after irradiation than their corresponding controls. The sensory evaluation indicates that the panelists mostly favoured the I and HWI irradiated groups for the overall appearance and texture of whole mangoes and pulp and in taste and palatability of the pulp alone. Transportation stress did not appear to have much of an effect on the ascorbic acid and dehydroascorbic acid levels and the sensorial tests. The mangoes stored and studied in Canada appeared to have a lower vitamin A content.     

多电子束契伦柯夫自由电子激光振荡器

我们对多电子束契伦柯夫自由电子激光进行了首次实验研究。280A,500kV的电子束被引入一多介质矩形谐振腔,在频率为33.4GHz处产生了1.7MW的契伦柯夫相干受激辐射。互作用效率为1.2％。     

Quantitative measurements of Ge surface segregation during SiGe alloy growth

Ge segregation during the growth of Si_{1 − x}Ge_x alloys (x = 5, 10, 20, and 40%) was studied using X-ray photoelectron spectroscopy. The alloys were grown in thicknesses up to 20.0 nm at 500°C to measure quantitatively the amount of segregated surface Ge. The length of alloy needed to reach steady-state growth edge was found to decrease with increasing alloy concentration (4.8, 2.8, 2.4, and 2.0 nm, respectively). It was found that each alloy had a complete monolayer of Ge on the surface and an increasing amount of segregated Ge in the second layer (20, 55, 80, and 95%, respectively) during steady-state growth. An increase in the temperature of alloy growth (400–750°C) resulted in an increase in the leading edge of alloy growth but did not change the amount of segregated Ge during steady-state growth. We propose that film stress is responsible for the amount of Ge segregation.     

Development of a finite-element analysis methodology for the propagation of delaminations in composite structures

Analysing the collapse of skin-stiffened structures requires capturing the critical phenomenon of skin-stiffener separation, which can be considered analogous to interlaminar cracking. This paper presents the development of a numerical approach for simulating the propagation of interlaminar cracks in composite structures. A degradation methodology was introduced in MSC.Marc, which involved the modelling of a structure with shell layers connected by user-defined multiple-point constraints (MPCs). User subroutines were written that employ the virtual crack closure technique (VCCT) to determine the onset of crack growth and modify the properties of the user-defined MPCs to simulate crack propagation. Methodologies for the release of failing MPCs are presented and are discussed with reference to the VCCT assumption of self-similar crack growth. The numerical results obtained by using the release methodologies are then compared with experimental data for a double-cantilever beam specimen. Based on this comparison, recommendations for the future development of the degradation model are made, especially with reference to developing an approach for the collapse analysis of fuselage-representative structures. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 1, pp. 15–42, January–February, 2007.     

Optical design of a toroidal grating monochromator based beam line on Indus-1

In this paper, we discuss the detailed optical design of a beam line that is under construction on the synchrotron radiation source, Indus-1. Toroidal mirrors are used as pre-and post- focusing elements and a toroidal grating monochromator as a dispersing element. Using three interchangeable gratings, this monochromator will give, at a moderate resolution, a good throughput on the sample in the wavelength range 40 to 1000 Å. Effect of various parameters and their optimization on the resolution and throughput characteristics have been studied by ray tracing calculations, and presented.     

高斯光束照射下的圆盘夫琅禾费衍射

推导了高斯光束照射圆孔或圆盘的衍射场普遍表达式，计算了半波带数接近于零的情况下上述衍射场的数据，进而分析了圆盘衍射场在艾里斑中增加一个暗环的原因。