Nitrogen Adsorption Study of MCM-41 Molecular Sieves Synthesized Using Hydrothermal Restructuring

Nitrogen desorption scanning hysteresis loops (DSHLs) for large-pore MCM-41 silicas (pore diameter from 4.0 to 6.5 nm) are reported for the first time. DSHLs for MCM-41 were compared with those of conventional mesoporous silicas and no appreciable differences were found, although hysteresis loops and DSHLs for the latter were usually broader. Since desorption behavior of conventional porous silicas is appreciably influenced by pore connectivity, the observed similarity in hysteresis behavior suggests single-pore blocking effects for MCM-41 due to variation of pore diameter along its nonintersecting channels. It was also shown that the steepness of nitrogen desorption branches at relative pressures close to 0.4 often results from proximity of the lower pressure limit of adsorption-desorption irreversibility and consequently it is not justified to consider it as an indication of narrow pore size distribution. Thus, application of desorption data in calculations of pore size distributions may be grossly misleading.     

Polymer crystallization dynamics,as reflected by differential scanning calorimetry. Part 2: Numerical simulations

With the aid of a model for the kinetics of polymer crystallization, as put forward in previous publications, the shape of DSC-curves and their position on the temperature scale were simulated for various conditions of heat transfer in the apparatus. It turns out that the outcome is very dependent on the assumptions made with respect to these heat transfer conditions. For the ideal condition — no temperature differences between sample, pan and furnace — an invariable shape is predicted for the DSC-curves. They only shift to lower temperatures with increasing cooling rates. For more realistic conditions, the curves not only shift but become broader and their maxima decrease. They show a more familiar appearance. These calculations are very involved, however, A simple balance equation is shown to yield equivalent results, if a dimensionless characteristic number like the Nusselt number remains considerably smaller than one. This number contains an effective heat transfer coefficient between sample and furnace which, surprisingly, should not be too high. Apparently, the heat capacity of the pan does not play an important role under these conditions. This is investigated in Appendix II. Appendix I describes the procedure of the numerical simulations.     

COPOLYMERS OF 2-ACRYLAMIDO-2-METHYL-1-PROPANESULFONIC ACID/MALEIC ACID： SYNTHESIS, CHARACTERIZATION AND ANTIMICROBIAL ACTIVITY

2-Acrylamido-2-methy1-1-propanesulfonic acid(AMPS),and maleic acid(MA)copolymerized with different feed ratios using N,N-dimethylformamide as a solvent and benzoyl peroxide(Bz_2O_2)as an initiator at 70℃.Structure and composition of copolymers for a wide range of monomer feed were determined by elemental analysis(content of N for AMPS-units).Monomer reactivity ratios for AMPS(M_1)-MA(M_2)pair were determined by the application of conventional linearization methods such as Fineman-Ross(F-R),Kelen-Tüd(?)s(KT)and Extended Kelen-Tüds(EKT)and a nonlinear error invariable model method using a computer program RREVM.The characterizations were done by Fourier transform infrared spectroscopy(FTIR),differential scanning calorimetry(DSC)thermal gravimetry analysis(TGA),and and X-ray diffraction.The antimicrobial effects of polymers were also tested on various bacteria,and yeast.     

普鲁士兰修饰碳黑微电极同时微分伏安法测定多巴胺和抗坏血酸

将含有1.0%普鲁士蓝的碳黑与固体石蜡按2.5∶1(质量比)混合后装入φ0.2mm的石英毛细管中,在其上端插入一铂丝并抛光后即制成普鲁士蓝修饰碳黑微电极.对多巴胺(DA)及抗坏血酸(VC)在此电极上的电化学行为及应用此电极测定两组分的最佳条件进行了研究,在定量测定中采用二次微分线性扫描伏安法.在最佳条件下,DA与VC的峰电流(i″p)分别与各自的浓度保持如下线性关系DA为4.0×10-6～8.0×10-4mol·L-1,VC为6.0×10-5～1.0×10-3mol·L-1;检出限(3σ)依次为2.0×10-6mol·L-1及1.0×10-5mol·L-1.应用此方法分析了3种含DA及VC的混合溶液,测得结果的相对标准偏差(n=8)依次小于2.0%及3.0%,回收率范围依次为96.5%～101.0%及95.0%～102.5%.     

Analysis of the nonisothermal crystallization kinetics in three linear aromatic polyester systems

Melt or cold crystallization kinetics has a strong bearing on morphology and the extent of crystallization, which significantly affects the physical properties of polymeric materials. Nonisothermal crystallization kinetics are often analyzed by the classical Johnson–Mehl–Avrami–Kolmogorov (JMAK) model or one of its variants, even though they are based on an isothermal assumption. As a result, during the nonisothermal (e.g. constant heating or cooling rate) crystallization of polymeric material, different sets of model parameters are required to describe crystallization at different rates, thereby increasing the total number of model parameters. In addition, due to the uncorrelated nature of these model parameters with the cooling or heating rate, accurate modeling at any intermediate condition is not possible. In the present work, these two limitations of the conventional approach have been eliminated by exhibiting the existence of a functional relationship between cooling or heating rate and effective activation energy during nonisothermal melt or cold crystallization in three linear aromatic polyesters. Furthermore, it has been shown that when the JMAK model is used in conjunction with this functional relationship, it is possible to precisely predict the experimental nonisothermal melt or cold crystallization kinetics at any linear cooling or heating rate with a single set of model parameters.     

On the conformational stability and dimerization of phosphotransferase enzyme I from Escherichia coli

The activity of enzyme I (EI), the first protein in the bacterial PEP:sugar phosphotransferase system, is regulated by a monomer–dimer equilibrium where a Mg²⁺-dependent autophosphorylation by PEP requires the homodimer. Using inactive EI(H189A), in which alanine is substituted for the active-site His189, substrate binding effects can be separated from those of phosphorylation. Whereas 1 mM PEP (with 2 mM Mg²⁺) strongly promotes dimerization of EI(H189A) at pH 7.5 and 20 °C, 5 mM pyruvate (with 2 mM Mg²⁺) has the opposite effect. A correlation between the coupling of N- and C-terminal domain unfolding, measured by differential scanning calorimetry, and the dimerization constant for EI, determined by sedimentation equilibrium, is observed. That is, when the coupling between N- and C-terminal domain unfolding produced by 0.2 or 1.0 mM PEP and 2 mM Mg²⁺ is inhibited by 5 mM pyruvate, the dimerization constant for EI(H189A) decreases from >10⁸ to <5 × 10⁵ or 3 × 10⁷ M⁻¹, respectively. With 2 mM Mg²⁺ at 15–25 °C and pH 7.5, PEP has been found to bind to one site/monomer of EI(H189A) with K_A′10⁶ M⁻¹ (ΔG′=−33.7±0.2 kJ mol⁻¹ and ΔH=+16.3 kJ mol⁻¹ at 20 °C with ΔC_p=−1.4 kJ K⁻¹ mol⁻¹). The binding of PEP to EI(H189A) is synergistic with that of Mg²⁺. Thus, physiological concentrations of PEP and Mg²⁺ increase, whereas pyruvate and Mg²⁺ decrease the amount of dimeric, active, dephospho-enzyme I.     

Two‐ and Three‐Dimensional Molecular Organization of Schiff‐Base Derivatives

We have designed and synthesized a series of Schiff base derivatives, and studied their structural features in two‐dimensional (2D) and three‐dimensional (3D) states by combining scanning tunneling microscopy (STM) and X‐ray diffraction experiments. The Schiff‐base derivatives with short alkyl chains crystallize easily, which allows a detailed structural analysis by X‐ray diffraction. Due to the strong adsorbate–substrate interactions, those bases with long alkyl chains easily form 2D assemblies on highly oriented pyrolytic graphite (HOPG). The STM images indicate also that the introduction of two methoxy groups into the molecule can change the structure of these 2D assemblies as a result of the increased steric hindrances, for example: the Schiff‐base derivative, bearing both methoxy groups and C₁₆H₃₃ tails, forms 2D Moiré patterns, and an alignment of pairing Schiff‐base molecules may be easily resolved. Conversely, the Schiff base derivative, bearing solely C₁₆H₃₃ tails, forms 2D non‐Moiré patterns. It is demonstrated that the 3D structural features result from the compromise of intermolecular interactions of different molecular moieties. However, there is one more factor, which also governs the 2D structure: the adsorbate‐substrate interaction. The 3D crystal structure may thus help to understand many factors involved in the formation of 2D structures, and would be helpful for designing new molecular assemblies with tailoring functions.     

Protein-reactive natural products

Researchers in the post-genome era are confronted with the daunting task of assigning structure and function to tens of thousands of encoded proteins. To realize this goal, new technologies are emerging for the analysis of protein function on a global scale, such as activity-based protein profiling (ABPP), which aims to develop active site-directed chemical probes for enzyme analysis in whole proteomes. For the pursuit of such chemical proteomic technologies, it is helpful to derive inspiration from protein-reactive natural products. Natural products use a remarkably diverse set of mechanisms to covalently modify enzymes from distinct mechanistic classes, thus providing a wellspring of chemical concepts that can be exploited for the design of active-site-directed proteomic probes. Herein, we highlight several examples of protein-reactive natural products and illustrate how their mechanisms of action have influenced and continue to shape the progression of chemical proteomic technologies like ABPP.     

Development of a systems analysis approach for resolving the structure of biodegrading soil systems

An experimental and mathematical method is developed for the microbial systems analysis of polyaromatic hydrocarbon (PAH)-degrading mixed cultures in PAH-contaminated “town gas” soil systems. Frequency response is the primary experimental and data analysis tool used to probe the structure of these complicated systems. The objective is to provide a fundamental protocol for evaluating the performance of specific mixed microbial cultures on specific soil systems by elucidating the salient system variables and their interactions. Two well-described reactor systems, a constant volume stirred tank reactor (CSTR) and a plug flow differential volume reactor, are used in order to remove performance effects that are related to reactor type as opposed to system structure. These two reactor systems are well-defined systems that can be described mathematically and represent the two extremes of one potentially important system variable, macroscopic mass transfer. The experimental and mathematical structure of the protocol is described, experimental data is presented, and data analysis is demonstrated for the stripping, sorption, and biodegradation of napththalene.     

Poly(butylene terephthalate)/poly(ε-caprolactone) blends: Influence of PCL molecular mass on PBT melting and crystallization behavior

The isothermal crystallization kinetics and melting behavior of poly(butylene terephthalate) (PBT) in binary blends with poly(ε-caprolactone) (PCL) was investigated as a function of PCL molecular mass by differential scanning calorimetry and optical microscopy. The components are miscible in the melt when oligomeric PCL (M_w = 1250) is blended with PBT, whereas only partial miscibility was found in mixtures with higher molecular mass (M_w = 10,000 and 50,000). The equilibrium melting point of PBT in the homopolymer and in blends with PCL was determined through a non-linear extrapolation of the T_m = f(T_c) curve. The PBT spherulitic growth rate and bulk crystallization rate were found to increase with respect to plain PBT in blends with PCL1250 and PCL10000, whereas addition of PCL50000 causes a reduction of PBT solidification rate. The crystallization induction times were determined by differential scanning calorimetry for all the mixtures through a blank subtraction procedure that allows precise estimation of the crystallization kinetics of fast crystallizing polymers. The results have been discussed on the basis of the Hoffman-Lauritzen crystallization theory and considerations on both the transport of chains towards the crystalline growth front and the energy barrier for the formation of critical nuclei in miscible and partially miscible PBT/PCL mixtures are widely debated.