测量不确定度的研究和应用进展

综述了测量不确定度在国内外的研究及应用的进展，发现测量不确定度是现代误差理论的重要内容，是定量描述测量结果质量的重要指标。目前由ISO等七个国际组织提出的GUM(测量不确定度表述导则)已被各国广泛接受，国内外已有大量关于不确定度应用的文献。除GUM外，还存在其它几种不确定度评定模型。我国虽然对GUM存在重大疑义，并向有关国际组织提出了一些建设性的意见，但在方法的执行上目前仍然与国际社会保持了对GUM的一致态度。     

Structural study and physical properties of a new phosphate KCuFe(PO4)2

Single crystals of a new phosphate KCuFe(PO₄)₂ have been prepared by the flux method and its structural and physical properties have been investigated. This compound crystallizes in the monoclinic system with the space group P2₁/n and its parameters are: a=7.958(3) Å, b=9.931(2) Å, c=9.039(2) Å, β=115.59(3)° and Z=4. Its structure consists of FeO₆ octahedra sharing corners with Cu₂O₈ units of edge-sharing CuO₅ polyhedra to form undulating chains extending infinitely along the b-axis. These chains are connected by the phosphate tetrahedra giving rise to a 3D framework with six-sided tunnels parallel to the [101] direction, where the K⁺ ions are located. The Mössbauer spectroscopy results confirm the exclusive presence of octahedral Fe³⁺ ions. The magnetic measurements show the compound to be antiferromagnetic with C_m=5.71 emu K/mol and θ=−156.5 K. The derived experimental effective moment μ_ex=6.76μ_B is somewhat higher than the theoretical one of μ_th=6.16μ_B, calculated taking only into account the spin contribution for Fe³⁺ and Cu²⁺ cations. Electrical measurements allow us to obtain the activation energy (1.22 eV) and the conductivity measurements suggest that the charge carriers through the structure are the potassium cations.     

四分之一超导谐振腔的仿真对比

超导量子电路已成为实现量子计算机的主流技术路线之一,其中四分之一波长超导谐振腔主要用于读取量子比特的状态信息,是实现超导量子电路的关键器件.本文设计了四分之一波长超导谐振腔,利用两种电磁仿真算法(有限元法以及矩量法),对超导谐振腔的传输特性进行建模仿真验证.制备出了设计的超导谐振腔样品,在20±5 mK的低温环境下对其传输特性进行测量.通过仿真结果与设计值和实测值进行对比研究,发现基于矩量法的sonnet软件在仿真准确性、仿真速率以及资源消耗等方面都优于基于有限元法的HFSS软件.同时研究了谐振腔之间的串扰对仿真精度的影响,当谐振腔数目不多时,其相互之间串扰的影响几乎可以忽略.     

The acoustical characterization of orchestra platforms and uncertainty estimation of the results

Measurements have been carried out on furnished orchestra platforms in four concert halls in Italy in order to describe the sound field perceived by musicians. The heterogeneous nature of the orchestra suggested a procedure able to take into account the mutual hearing between instrumental sections. The measured parameters were the early, late and total support, the reverberation time, the early decay time and the clarity index. A part of the study has been devoted to the measurement uncertainty estimation. The source directivity and the small displacements of the microphone influence the early decay time to a great extent while the on-platform spatial variability affects both the early decay time and the clarity index. Per-section early support shows differences that render the overall spatial mean inappropriate to describe the stage as a whole. For the other parameters an overall mean platform value can instead be suitable, even though, for the case of clarity a more evident group variability is observed. The values of late support, reverberation time, early decay time and clarity index, proposed in literature as suitable measures of reverberance for musicians, are not all intercorrelated, indicating that not all these parameters can be associated to the same subjective impression.     

Zur Methodik der Messung der Aktivität von umschlossenen γ-Strahlungsquellen mittels Ionisationskammern

In der Arbeit wird über eine Empfehlung zur Methodik der Weitergabe der Aktivitätseinheit für umschlossene γ-Strahlungsquellen von den Normalen der metrologischen Slaatsämter der UdSSR (WNIIM) und der DDR (ASMW) an Normale niederer Ordnung berichtet. Die Weitergabe der Aktivitätseinheit geschieht durch Vergleich mittels Ionisationskammern. Die Empfehlung bezieht sich auch auf solche Fälle, in denen neben dem Hauptnuklid ein Verunreinigungsnuklid in der Quelle enthalten ist, sowie auf solche, bei denen unterschiedlicher Aufbau der zu vergleichenden Quellen vorliegt. Auβerdem umfaβt die Empfehlung die Methode der Fehlerrechnung.     

Accelerating electromagnetic magic field from the C-metric

Various aspects of the C-metric representing two rotating charged black holes accelerated in opposite directions are summarized and its limits are considered. A particular attention is paid to the special-relativistic limit in which the electromagnetic field becomes the “magic field” of two oppositely accelerated rotating charged relativistic discs. When the acceleration vanishes the usual electromagnetic magic field of the Kerr–Newman black hole with gravitational constant set to zero arises. Properties of the accelerated discs and the fields produced are studied and illustrated graphically. The charges at the rim of the accelerated discs move along spiral trajectories with the speed of light. If the magic field has some deeper connection with the field of the Dirac electron, as is sometimes conjectured because of the same gyromagnetic ratio, the “accelerating magic field” represents the electromagnetic field of a uniformly accelerated spinning electron. It generalizes the classical Born’s solution for two uniformly accelerated monopole charges.     

Structures and magnetic properties for electrodeposited Co ultrathin films on copper

The formation of Co films on polycrystalline copper in diluted sulphuric acid was investigated by employing cyclic voltammetry (CV), atomic force microscopy, and in-situ magneto-optic Kerr effect (MOKE) techniques. By comparing CV measurements in the pure supporting electrolyte (11 mM K₂SO₄/1 mM H₂SO₄) and the cobalt sulphate solution (10 mM K₂SO₄/1 mM H₂SO₄/1 mM CoSO₄), peaks from voltammetric cycling for copper dissolution, readsorption of dissolved copper ions, cobalt bulk dissolution and oxidation of hydrogen could be resolved. As the electroplating time increases, the size of the Co clusters increases and the deposition of Co corresponds to island growth. The first hysteresis loop occurs at a Co thickness of 0.33 nm in the longitudinal configuration. For films thinner than 7 nm, the Kerr intensity increases linearly because the Curie temperature of the film is well above 300 K.     

Photonic gap vanishing in one-dimensional photonic crystals with single-negative metamaterials

The properties of photonic band gap in one-dimensional photonic crystals composed of single-negative metamaterials are studied theoretically. Our study shows that the photonic gap will vanish at a certain incident angle when both the phase-match and impedance-match conditions are satisfied simultaneously, suggesting that the bandwidth and location of the photonic gap are strongly dependent on the incident angle and polarization. However, the photonic gap will not vanish and may become insensitive to the incident angle when the two match conditions cannot be met. Our study also shows that losses in metamaterials have little effect on the properties of the photonic gap.     

Measurement of photoneutron doses in and out of high-energy X-ray beam of a SATURNE-20 medical linear accelerator by ECE polycarbonate detectors

Photoneutron contaminations in and out of high energy X-ray beams of the medical linear accelerator SATURNE 20 (CGR) of the Radiotherapy Department of Omeed Hospital in Isfahan, Iran, have been determined using 250 μm polycarbonate (PC) dosimeters, in strips or in sheets, processed by electrochemical etching (ECE) using specially designed ECE chambers to etch larger sheets. A two dimensional or topographical distribution of neutron contamination was also determined in a full size beam. The neutron dose equivalents (Hn) in the beam of 18 MV X-rays at 80 cm FSD were determined to be linear functions of X-ray dose equivalents (Hx) up to 1400 cSv. The distribution of the Hn at different X-ray doses showed bell-shape profiles with maxima at the isocenter. The ratios of dose equivalents of neutrons to those of X-rays increased as the field size increased having values of 0.22%, 0.28%, 0.31% and 0.37% for field sizes of 10×10, 20×20, 30×30, and 40×40 cm² respectively. Although such neutron dose equivalents can be corrected for patient treatment, it can cause radiation protection problems for workers where the design of the facility is not well planned.     

Design of electromagnetic cloaks and concentrators using form-invariant coordinate transformations of Maxwell’s equations

The technique of applying form-invariant, spatial coordinate transformations of Maxwell’s equations can facilitate the design of structures with unique electromagnetic or optical functionality. Here, we illustrate the transformation-optical approach in the designs of a square electromagnetic cloak and an omni-directional electromagnetic field concentrator. The transformation equations are described and the functionality of the devices is numerically confirmed by two-dimensional finite element simulations. The two devices presented demonstrate that the transformation optic approach leads to the specification of complex, anisotropic and inhomogeneous materials with well directed and distinct electromagnetic behavior.