PROBE FOR THE FORMATION RATIO BETWEEN EXCITED TRIPLETS AND SINGLETS AS GENERATED IN POLYMER LIGHT-EMITTING DIODES*

The electroluminescence (EL) produced by a highly luminescent phosphorescent dye Cu_4(C≡CPh)_4L_2 (L = 1.8-bis(di-phenylphosphino)-3, 6-dioxaoctane, Cu_4) doped polymer as emitting layer is reported. The effects o f the chargeinjection balance on the polymers, in particular, poly(N-vinylcarbazole) (PVK) have been studied by usingphotoluminescence and elecholuminescence spectroscopy. Changes in the emission spectra demonstrate the influence of thecharge injection balance on the formation ratio of triplet and singlet excitons. (This provides a new technical approach torealize the color patterning in polymer LEDs.     

多孔硅表面钝化对其发光性能的影响

报道多孔硅（PS）的表面钝化对其光致发光（PL）和电致发光（EL）的影响。PL和EL谱表明,经钝化处理的PS的PL和EL强度明显增强,且发光峰位较大蓝移;存放实验表明,经钝化处理的PS的PL和EL发光强度和发光峰位具有较好的稳定性;I～V曲线显示,经钝化处理的PS发光器件具有较低的启动电压。这些结果表明：用钝化处理的方法是提高PS的PL和EL强度和稳定性及改善其器件性能的有效途径。     

一种新型的稀土Tb配合物的光致和电致发光性能的研究

用一种新型的含酚羟基的Schiff碱三足配体H₃L3稀土Tb配合物作发光层制备了三层结构电致发光器件,器件在正向直流偏压下发出明亮的绿光。器件的电致发光(EL)光谱和Tb配合物薄膜的光致发光(PL)光谱与典型的Tb配合物的发光光谱相同。研究了器件发光及电学特性,讨论了该种新型的稀土Tc配合物的发光机理。     

两种铽配合物与PVK混合体系的发光机理研究

研究了稀土配合物Tb(p-MBA)₃phen(样品Ⅰ)和Tb(p-ClBA)₃phen(样品Ⅱ)与导电聚合物材料PVK掺杂体系的光致发光和电致发光特性。发现在样品Ⅰ与PVK混合薄膜的光致发光中,除了三价铽离子的发光外,还能看到明显的PVK的发光;而在电致发光中,PVK的发光完全被抑制,只能看到Tb3+的绿光发射。对样品Ⅱ与PVK的混合发光层,无论其光致发光谱还是电致发光谱,都没有看到410 nm处PVK的发射。进一步测量两种材料的激发光谱,初步探讨了器件的发光机理。样品Ⅰ的发光可能来源于两个方面,一是PVK到稀土配合物的不完全的能量传递,二是由于载流子俘获机理;样品Ⅱ的发光则是由于PVK到稀土配合物的完全的能量传递。     

Silicon-on-insulator microcavity light emitting diodes with two Si/SiO2 Bragg reflectors

Light emitting pn-diodes were fabricated on a 5.8 μm thick n-type Si device layer of a silicon-on-insulator (SOI) wafer using standard silicon technology and boron implantation. The thickness of the Si device layer was reduced to 1.3 μm, corresponding to a 4λ-cavity for λ=1150 nm light. Electroluminescence spectra of these low Q-factor microcavities are presented. Addition of Si/SiO₂ Bragg reflectors on the top and bottom of the device (3.5 and 5.5 pairs, respectively) is predicted to lead to spectral emission enhancement by ∼270.     

The insert of zinc oxide thin film in indium tin oxide anode for organic electroluminescence devices

Zinc oxide films were prepared by rf magnetron sputtering on glass substrates with designed ZnO target using high-purity of zinc oxide (99.99%) powder. Systematic study on dependence of target-to-substrate distance (D_ts) on structural, electrical and optical properties of the as-grown ZnO films was mainly investigated in this work. XRD showed that highly preferred ZnO crystal in the [0 0 1] direction was grown in parallel to the substrate, while the D_ts did not effect to the peak position of XRD. With decreasing D_ts, the growth rate is increased while the electrical resistivity as well as crystal size in the ZnO films was decreased. The XPS data showed that the O/Zn ratio in ZnO films was increased with increasing D_ts in the films. The as-grown ZnO films have an average transmittance of above 85% at the visible region. The optical band gap of the as-grown ZnO films was changed from 3.18 to 3.36 eV with D_ts. With decreasing D_ts, the electrical resistivity was decreased, while the growth rate was increased.A bilayer is used as an anode electrode for organic electroluminescent devices. The bilayer consists of an ultrathin ZnO layer adjacent to a hole-transporting layer and an Indium tin oxide (ITO) outerlayer. We tried to bring low the barrier between the devices as deposited ZnO films on ITO substrates. We fabricated the organic EL structure consisted of Al as a cathode, Al₂O₃ as an electro transport layer, Alq₃ as a luminously layer, TPD as a hole transport layer and ZnO (1 nm)/ITO (150 nm) as an anode. The result of this experiment was not good compared with the case of using ITO, nevertheless, at this structure we obtained the lowest turn-on voltage as the value of 19 V and the good brightness (6200 cd/m²) of the emission light from the devices. Then the quantum efficiency was to be 1.0%.     

Photoluminescence and electroluminescence from porous silicon

The properties and origins of the red, blue and infrared photoluminescence bands of porous silicon are reviewed and discussed in the light of the models that have been proposed to explain the experimental and theoretical results. The red band is due to quantum confinement possibly supplemented by surface states; the blue band is linked to the presence of silicon dioxide; the infrared band is correlated with dangling bonds and bandgap luminescence in large crystallites. The fabrication and characterization of light-emitting devices made of porous silicon are reported and discussed with respect to critical issues such as the device stability, efficiency, modulation speed, emission wavelength, and compatibility with microelectronic processing.     

老化产生的深能级对GaP纯绿发光二极管发光效率的影响

测量了GaP纯绿发光二极管老化前后的可见和近红外发光光谱,研究了老化产生的深能级的来源及其对二极管发光效率的影响.在老化后的发光光谱中观测到650nm和1260nm发光带,发现1260nm发光带的发光强度随老化时间的增加而增强.实验结果表明老化产生的与磷相关的深能级严重地影响了GaP纯绿LED的发光效率.     

Mid-infrared lasing from self-consistent quantum wells at a type II single broken-gap heterointerface

A new physical approach for the design of mid-IR lasers operating at 3–5 μm based on type II heterojunctions with effective electron–hole confinement owing to a large asymmetric band-offset at the interface (ΔE_C>0.6 eV and ΔE_V>0.35 eV) has been proposed. The creation of high barriers for carriers leads to their strong accumulation in the active region and increases the quantum emission efficiency of the spatially separated electrons and holes across the heteroboundary due to a tunnel-injection radiative recombination mechanism within the device. An extremely weak reduction of the electroluminescence (EL) intensity for the interface tunnelling-assisted emission band with increasing temperature from 77 to 300 K was observed. This coherent emission (λ=3.146 μm at 77 K) was totally polarised in the plane perpendicular to the p–n heterojunction plane, which means the laser emission was TM-polarised due to tunnelling-assisted light-hole–electron recombination across the interface.     

含二唑的聚(间亚苯乙烯)电致发光二极管

含二唑的聚（间亚苯乙烯）电致发光二极管印寿根李晨曦黄文强何炳林（南开大学吸附分离功能高分子材料国家重点实验室高分子化学研究所天津３０００７１）彭俊彪刘星元李文连（中国科学院长春物理研究所长春１３００２１）关键词电致发光，光电子能谱，聚（间亚苯...