Total phenol analysis of weakly supported water using a laccase-based microband biosensor

The monitoring of phenolic compounds in wastewaters in a simple manner is of great importance for environmental control. Here, a novel screen printed laccase-based microband array for in situ, total phenol estimation in wastewaters and for water quality monitoring without additional sample pre-treatment is presented. Numerical simulations using the finite element method were utilized for the characterization of micro-scale graphite electrodes. Anodization followed by covalent modification was used for the electrode functionalization with laccase. The functionalization efficiency and the electrochemical performance in direct and catechol-mediated oxygen reduction were studied at the microband laccase electrodes and compared with macro-scale electrode structures. The reduction of the dimensions of the enzyme biosensor, when used under optimized conditions, led to a significant improvement in its analytical characteristics. The elaborated microsensor showed fast responses towards catechol additions to tap water – a weakly supported medium – characterized by a linear range from 0.2 to 10 μM, a sensitivity of 1.35 ± 0.4 A M⁻¹ cm⁻² and a dynamic range up to 43 μM. This enhanced laccase-based microsensor was used for water quality monitoring and its performance for total phenol analysis of wastewater samples from different stages of the cleaning process was compared to a standard method.     

Ionic liquid-assisted electrochemical determination of pyrimethanil using reduced graphene oxide conjugated to flower-like NiCo2O4

The novel hierarchical flower-like superstructure NiCo₂O₄/reduced graphene oxide (rGO) hybrids have been successfully synthesized with a facile one-step hydrothermal process for the determination of fungicide pyrimethanil (PMT). For comparison, various structures of NiCo₂O₄/rGO including hexagonal nanoplates and nanorods were also synthesized. Among them, three-dimensional (3D) flower-like NiCo₂O₄/rGO exhibited the highest electrocatalytic activity for the oxidation of PMT. With the synergistic effect of [OMIM]PF₆ ionic liquid (IL), the electrochemical sensor film (NiCo₂O₄/rGO/IL) further facilitated interfacial electron transfer and enhanced electrocatalytic activity for the oxidation of PMT. Under the optimum conditions, the electrochemical sensor exhibited two linear ranges of 0.1–10.0 μmol/L and 20.0–140 μmol/L for PMT with a low detection concentration of 11.0 nmol/L. Besides, the interference, repeatability, reproducibility and stability measurements were also evaluated. The proposed method was successfully applied to the detection of PMT in water, seawater, fruits and vegetables with good recovery ranging from 93% to 105%, and possessed potential applications in the analysis of real samples.     

Computational design and multivariate optimization of an electrochemical metoprolol sensor based on molecular imprinting in combination with carbon nanotubes

This work describes the development of an electrochemical sensor based on a new molecularly imprinted polymer for detection of metoprolol (MTP) at ultra-trace level. The polypyrrole (PPy) was electrochemically synthesized on the tip of a pencil graphite electrode (PGE) which modified whit functionalized multi-walled carbon nanotubes (MWCNTs). The fabrication process of the sensor was characterized by cyclic voltammetry (CV) and the measurement process was carried out by differential pulse voltammetry (DPV). A computational approach was used to screening functional monomers and polymerization solvent for rational design of molecularly imprinted polymer (MIP). Based on computational results, pyrrole and water were selected as functional monomer and polymerization solvent, respectively. Several significant parameters controlling the performance of the MIP sensor were examined and optimized using multivariate optimization methods such as Plackett–Burman design (PBD) and central composite design (CCD). Under the selected optimal conditions, MIP sensor was showed a linear range from 0.06 to 490 μmol L⁻¹ MTP, a limit of detection of 2.88 nmol L⁻¹, a highly reproducible response (RSD 3.9%) and a good selectivity in the presence of structurally related molecules. Furthermore, the applicability of the method was successfully tested with determination of MTP in real samples (tablet, and serum).     

Aberrant sialylation of a prostate-specific antigen: Electrochemical label-free glycoprofiling in prostate cancer serum samples

Electrochemical detection method allowing to detect prostate-specific antigen (PSA), a biomarker of prostate cancer (PCa), with PSA glycoprofiling was applied in an analysis of PCa serum samples for the first time. Electrochemical impedance spectroscopy (EIS) as a label-free method with immobilized anti-PSA was applied for PSA detection and lectins to glycoprofile captured PSA on the same surface. A proper choice of blocking agent providing high selectivity of biosensor detection with the immobilized anti-PSA antibody was done. The biosensor could detect PSA down to 100 ag/mL with a linear concentration working range from 100 ag/mL up to 1 μg/mL, i.e. 10 orders of concentration magnitude and the sensitivity of (5.5 ± 0.2)%/decade. The results showed that a commercial carbo-free blocking solution was the best one, reducing non-specific binding 55-fold when compared to the immunosensor surface without any blocking agent applied, while allowing to detect PSA. The biosensor response obtained after addition of lectin (i.e. proportional to the amount of a particular glycan on PSA) divided by the biosensor response obtained after incubation with a sample (i.e. proportional to the PSA level in the sample) was applied to distinguish serum samples of PCa patients from those of healthy individuals. The results showed that Maackia amurensis agglutinin (MAA) recognizing α-2,3-terminal sialic acid can be applied to distinguish between these two sets of samples since the MAA/PSA response obtained from the analysis of the PCa samples was significantly higher (5.3-fold) compared to the MAA/PSA response obtained by the analysis of samples from healthy individuals. Thus, combined analysis of serological PSA levels together with PSA glycoprofiling of aberrant glycosylation of PSA (i.e. increase in the level of α-2,3-terminal sialic acid) has a potential to improve detection of PCa.     

固定漆酶聚苯胺-CoC2O4纳米复合物修饰电极的直接电化学

采用循环伏安法、微分脉冲伏安法、交流阻抗谱以及计时电流法等电化学方法,结合红外光谱、紫外-可见分光光度法、原子力显微镜、透射电子显微镜以及原子吸收光谱等辅助手段,表征了固定漆酶的聚苯胺-草酸钴纳米复合物的化学组成、结构和形貌,测试了纳米复合物固酶前后的导电性能的变化,研究了纳米复合物修饰电极上固定漆酶的直接电化学行为,评估了该电极的催化氧还原效能以及作为电化学传感器检测氧分子的性能。实验结果表明该电极在不含电子介体的溶液中以酶活性中心T2作为首要电子受体,将得到电子传递给化学吸附的氧气使其被电还原,其表观电子迁移速率为0.017 s~(-1),且具有良好的催化氧还原性能(氧还原起始电位:460 m V vs NHE,转化氧分子为水的表观速率常数为2.6×10-4 s~(-1)),酶电催化氧还原为水分子步骤为反应的速控步。该电极作为电化学传感器对氧具有极低检测限(0.20μmol·L~(-1)),宽线性响应范围(0.4~7.5μmol·L~(-1))以及对底物高亲和力(KM=122.4μmol·L~(-1))等优势。     

基于Ag@C@Ag核壳型纳米材料电化学传感器的制备及对邻苯基苯酚的测定

本文通过一种简单的水热反应合成出核壳型纳米材料Ag@C,然后再利用Ag@C表面丰富的功能基团均匀地负载一层Ag纳米颗粒,得到了大小均一、形貌良好的三层Ag@C@Ag核壳型纳米材料。实验结果表明,该Ag@C@Ag核壳纳米材料对邻苯基苯酚的电化学测定有良好的催化活性。据此,成功构建了一种简单、快速检测邻苯基苯酚的新型电化学传感器。该电化学传感器测定邻苯基苯酚的线性范围为0.08~35μmol/L,检出限为13.6nmol/L。     

Determination of Esomeprazole on an Electropolymerized L‐arginine and β‐cyclodextrin Modified Screen Printed Carbon Electrode

The formation of an inclusion complex of the proton‐pump inhibitor (PPI) drug esomeprazole (ESO) with ß‐cyclodextrin (ß‐CD) has been investigated and proven by cyclic voltammetry (CV). The formation constant of the complex was determined. Thereafter, an electropolymerized β‐CD and L‐arginine (L‐arg) modified screen printed carbon electrode (P‐β‐CD‐L‐arg/SPCE) was developed for the determination of ESO using differential pulse adsorptive stripping voltammetry (DPAdSV). A significant enhancement of the peak current was observed when applying an accumulation step due to the effect of adsorption. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) further indicated that the polymer of β‐CD and L‐arg efficiently improved the electron transfer kinetic between analyte and electrode surface. Under the optimized conditions, the oxidation peak current was linearly proportional to the concentration of the drug in the range of 1.0×10^?8 to 1.0×10^?5 M. The DPAdSV method was successfully used to determine the concentrations of the drug in spiked human serum samples.     

Electrochemical piezoelectric quartz crystal impedance study on the interaction between concanavalin A and glycogen at Au electrodes

The carbohydrate research has emerged as a "new frontier" in chemical/biological field. The binding of lectin with carbohydrate is one of the important courses of life activities. The report studies concanavalin A (Con A)-glycogen interaction on gold electrode surfaces by electrochemical piezoelectric quartz crystal impedance (EPQCI) method. The piezoelectric quartz crystal (PQC) parameters, resonant frequency shift (Deltaf(0)) and the motional resistance change (DeltaR(1)), and the electrochemical impedance (EI) parameters, electrolyte resistance change (DeltaR(s)) and the double layer capacitance change (DeltaC(s)), were measured and discussed simultaneously. Two methods were adopted for measuring the Con A-glycogen association. Based on EPQCI measurement during Con A reaction with glycogen adsorbed on Au electrode, association constant K(a) and the amount of the binding sites s calculated are 1.48 x 10(6) M(-1) and 4.09, respectively. Based on single PQC measurement of glycogen reaction with Con A assembled on Au electrode, K(a) was estimated to be 1.26 x 10(6) M(-1).     

Comparative study on the interaction of DNA with three different kinds of surfactants and the formation of multilayer films

The interactions between double-stranded DNA (dsDNA) and three different kinds of surfactants, i.e., cationic, anionic, and nonionic surfactants, were investigated by cyclic voltammetry, electrochemical impedance spectroscopy and UV-vis spectroscopy. Multilayer films composed of DNA and surfactants were prepared at gold electrode by electrostatic or hydrophobic interactions. It was found that the cationic surfactant, CTAB, can bind to DNA by electrostatic interaction, and the electron transfer resistance of CTAB-DNA complex film increases first and then decreases with CTAB concentration. The anionic surfactant, LAS, can bind to DNA but by hydrophobic interaction, and the electron transfer resistance of the complex film keeps decreasing with LAS concentration. Nonionic surfactants can also directly bind to DNA by hydrophobic interaction. All the three different kinds of surfactants can form multilayer films with DNA on the electrode surface. The chemical structure of DNA keeps unchanged during interacting with these surfactants. The binding modes of DNA with these three different kinds of surfactants were also deduced.     

Studies on structure and electrochemical properties of pillared M–MnO<Subscript>2</Subscript> (M=Ba<Superscript>2+</Superscript>, Sr<Superscript>2+</Superscript>, ZrO<Superscript>2+</Superscript>)

Supramolecular pillared oxides were prepared through the intercalation of M²⁺ cations into a MnO₂ host matrix by the method of ion exchange between the precursor δ-K _x MnO₂ and the corresponding guest. The materials M-MnO₂ crystallize in the hexagonal system, the same structure as the precursor, with a larger interlamellar spacing. In the case of ZrO-MnO₂, extended X-ray absorption fine structure (EXAFS) determination indicates that the Zr atom locates between the MnO₂ layers forming a stable structure. Compared with the precursor, the cycling property of M-MnO₂ was improved distinctly, while the capacity decreased to some degree due to the strong interaction between pillars and the host matrix. Among these pillared materials, ZrO-MnO₂ has an advanced reversible capacity of 161.5 mAh·g⁻¹ and improved cycling behavior compared with the precursor.