基于多肽的电化学传感器在蛋白质检测中应用的研究进展

生物体内的细胞通常会分泌各种各样的蛋白质,这些蛋白质在生物体中发挥着重要作用,尤其是可被用于诊断各种疾病的发生和发展。多肽具有良好选择性、空间适应能力和识别灵活的特点,可与不同类型的蛋白分子形成非共价键,用于蛋白质的生物检测。将多肽与电化学生物传感器结合用于蛋白质的广谱检测具有良好的发展前景。本文介绍了多肽修饰的电化学传感器在不同蛋白质检测方面的研究进展,分析了待测蛋白质的不同对多肽修饰的电化学传感器分类的影响及其优缺点,提出了基于多肽的电化学传感器在不同蛋白质检测中存在的问题,并展望了其未来发展。     

The electrochemical evaluation of antipsychotic drug (promethazine) in biological and environmental samples through samarium cobalt oxide nanoparticles

In this work, we developed a perovskite structured samarium cobalt oxide nanoparticles (SmCoO₃ NPs) with the aid of the co-precipitation method. The rare earth metal (Sm) and cobalt oxide combined to form a perovskite lattice structure. One-pot route synthesized SmCoO₃ NPs were scrutinized successfully through various physicochemical techniques. Concerning its effective thermal stability and electrical properties, the synthesized SmCoO₃ NPs have been effectively implemented in the electrochemical evaluation of promethazine hydrochloride (PHY) using cyclic voltammetry. The electrochemical detection of PHY was performed through SmCoO₃ NPs-modified glassy carbon electrode (GCE) and unmodified GCE. The electron transfer kinetics, effect of scan rate, the influence of pH, electroactive surface area, selectivity, and sensitivity have been studied. The electron charge transfer rate (R_ct) and electrolyte resistance (R_s) were calculated to be 105.59 (Ω) and 150 (Ω) in the ferricyanide probe, indicating great facilitation of the electron transfer between PHY and SmCoO₃ NPs deposited on the electrode surface. Further, the optimized SmCoO₃-modified GCE exemplifies excellent selectivity, storage stability, reproducibility, repeatability, detection limit (5 nM), sensitivity (0.594 μA μM^?1 cm^?2), and wide consecutive linear ranges, respectively. Besides, the proposed method has been effectively employed for the detection of PHY in the various real samples which reveals good recoveries of 95.40–99.17%.     

Facile hydrothermal synthesis of zinc sulfide nanowires for high-performance asymmetric supercapacitor

A facile, single-step hydrothermal route is followed to prepare ZnS nanowires with large aspect ratios. The obtained ZnS nanowires deposited on nickel foam (ZnS/Ni-foam) exhibit a specific capacitance of 781 F/g at a current density of 0.5 A/g. An asymmetric supercapacitor fabricated from ZnS/Ni-foam as a positive electrode and jute derived activated carbon coated on Ni-foam (JAC/Ni-foam) as a negative electrode attains a high specific capacitance of 573 F/g at a current density of 0.5 A/g, with an accompanying high energy density of 51 Wh/kg at a power density of 200 W/kg in an extensive operating potential window of 1.2 V. In addition, the ZnS//JAC asymmetric supercapacitor reveals long-term cyclic stability, after 10,000 GCD cycles the device sustain around ～87 % of the initial specific capacitance. These results shed enlighten a new opportunity for promising electrode materials in supercapacitors.     

Electronic structure theory investigation on the electrochemical properties of cyclohexanone derivatives as organic carbonyl-based cathode material for lithium-ion batteries

Organic carbonyl-based compounds with redox-active site have recently gained full attention as organic cathode material in lithium-ion batteries (LIBs) owing to its high cyclability, low cost, high abundance, tunability of their chemical structure compared to traditionally used inorganic material. However, the utilization of organic carbonyl-based compounds in LIBs is limited to its poor charge capacity and dissolution of lower molecular weight species in electrolytes. In this study, we theoretically investigated five set of cyclohexanone derivatives (denoted as: H₁, H₂, H₃, H₄, and H₅) and influence of functional groups (-F and -NH₂) on their electrochemical properties using advanced level density functional theory (DFT) with the Perdew-Burke-Ernzenhof hybrid functional (PBE0) at 6-31+G(d,p) basis set. In line with the result gotten, the HOMO-LUMO results revealed that compound H₅ is the most reactive among the studied cyclohexanone derivatives exhibiting energy gap values of 0.552, 0.532, 0.772 eV for free optimized structures and structurally engineered structures with electron withdrawing group (EWG) and electron donating group (EDG) respectively. Also, results from electrochemical properties of the studied compounds lithiated with only one lithium atom displayed that compound H₂ exhibited interesting redox potential and energy density for all the studied structures in free optimized state (1108.28 W h kg^?1, 4.92 V vs Li/Li⁺), with EWG (648.22 W h kg^?1, 3.313 V Li/Li⁺), and with EDG (1002.4 W h kg^?1, 5.011 V vs Li/Li⁺). From our result, we can infer that compound H₂ and H₃ with corresponding redox potential, energy density and theoretical charge capacity value of 4.92 V vs Li/Li⁺, 1108.28 W h kg^?1, 225.26 mA h g^?1 and 5.168 V, 1041.61 W h kg^?1, 201.55 mA h g^?1 lithiated with only one lithium atom in free optimized state are the most suitable compounds to be employed as organic cathode material in lithium-ion batteries among all the investigated cyclohexanone derivatives.     

New Insights on Potentiometric Immunosensor at Carbon Fiber Microelectrode for Alpha-Fetoprotein in Hepatocellular Carcinoma

Herein, we investigated the analytical features of potentiometric immunosensors for detection of alpha-fetoprotein (AFP) in hepatocellular carcinoma at different electrodes, such as carbon fiber microelectrode (CFME) and carbon-disk electrode (CDE), respectively. To construct such an immunosensor, anti-AFP capture antibodies were first conjugated covalently onto the activated electrodes through typical carbodiimide coupling. Thereafter, one-step immunoreaction protocol was successfully introduced to develop a new potentiometric immunoassay upon addition of AFP. Accompanying the antigen-antibody reaction, the surface charges of the modified electrodes were changed for the readout of electric potential. Results indicated that the linear range of CDE-based immunosensor was 0.1–100 ng mL⁻¹ AFP, whereas the assay sensitivity by using CFME could be further increased to 3.2 pg mL⁻¹ with the linear range from 0.01 to 500 ng mL⁻¹ AFP. Meanwhile, CFME-based immunosensor showed high sensitivity, good reproducibility and specificity, and could be utilized for the analysis of human serum specimens with consistent results relative to commercialized ELISA kit.     

Graphene Nanocomposites Based Electrochemical Sensing Platform for Simultaneous Detection of Multi-drugs

Three reduced graphene oxide nanocomposites were employed to achieve the simultaneous electrochemical determination of multi-drugs including acetaminophen (ACTM), carbendazim (CB) and ciprofloxacin (CFX). All nanocomposite modified electrodes showed improved current responses for three drugs. Notably cauliflower-like platinum nanoparticles decorated reduced graphene oxide modified electrode (or Pt−RGO/GCE) exhibited the best performance in terms of electrochemical stability. Using Pt−RGO/GCE, the linear detect ranges of 30–120 μM, 25–115 μM and 10–25 μM, and detection limit values of 3.49, 2.96, and 1.53 μM were achieved for ACTM, CB and CFX respectively. The electrode was further used for the successful determination of above drugs in tap and river water using differential pulse voltammetry. From the obtained results, we believe that Pt-RGO/GCE is highly promising for the fabrication of robust electrochemical sensors for simultaneously determining ACTM, CB and CFX or similar types of drugs in the future.     

Pd nanoparticles on boron doped graphene catalyst for electrochemical detection of hydrogen peroxide prepared by electroless deposition methodEI北大核心CSCD

Taking advantage of large conjugated structure and reductivity of boron-doped graphenethe palladium nanoparticles/boron-doped graphene catalyst was prepared by electroless deposition method using boron-doped graphene as reductant and stabilizer. The average size of palladium nanoparticles highly dispersed on the surface of boron-doped graphene was about 6.5 nm. The electrochemical sensor was prepared by modifying the as-formed catalyst on the surface of glassy carbon electrode. The obtained electrochemical sensor exhibited an excellent electrochemical catalytic activity for H2 O2 . It exhibited high sensitivity with the detection limit as low as 830 nmol/L and good linearity in the range of 2.5-300 μµmol/L for detection of H2 O2 . It could be utilized for the determination of H2 O2 in milk samples. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

CeO2担载Cu纳米粒子电催化CO2还原产乙烯：CeO2不同暴露晶面对催化性能的影响

Fossil fuels are expected to be the major source of energy for the next few decades. However, combustion of nonrenewable resources leads to the release of large quantities of CO₂, the primary greenhouse gas. Notably, the concentration of CO₂ in the atmosphere is increasing annually at an astounding rate. Electrochemical CO₂ reduction (ECR) to value-added fuels and chemicals using electricity from intermittent renewable energy sources is a carbon-neutral method to alleviate anthropogenic CO₂ emissions. Despite the steady progress in the selective generation of C₁ products (CO and formic acid), the production of multi-carbon species still suffers from low selectivity and efficiency. As an ECR product, ethylene (C₂H₄) has a higher energy density than do C₁ species and is an important industrial feedstock in high demand. However, the conversion of CO₂ to C₂H₄ is plagued by low productivity and large overpotential, in addition to the severe competing hydrogen evolution reaction (HER) during the ECR. To address these issues, the design and development of advanced electrocatalysts are critical. Here, we demonstrate fine-tuning of ECR to C₂H₄ by taking advantage of the prominent interaction of Cu with shape-controlled CeO₂ nanocrystals, that is, cubes, rods, and octahedra predominantly covered with (100), (110), and (111) surfaces, respectively. We found that the selectivity and activity of the ECR depended strongly on the exposed crystal facets of CeO₂. The overall ECR Faradaic efficiency (FE) over Cu/CeO₂(110) (FE ≈ 56.7%) surpassed that of both Cu/CeO₂(100) (FE ≈ 51.5%) and Cu/CeO₂(111) (FE ≈ 48.4%) in 0.1 mol·L^-1 KHCO₃ solutions with an H-type cell. This was in stark contrast to the exclusive occurrence of the HER over pure carbon paper, CeO₂(100), CeO₂(110), and CeO₂(111). In particular, the FE toward C₂H₄ formation and the partial current density increased in the sequence Cu/CeO₂(111) < Cu/CeO₂(100) < Cu/CeO₂(110) within applied bias potentials from -1.00 to -1.15 V (vs. the reversible hydrogen electrode), reaching 39.1% over Cu/CeO₂(110) at a mild overpotential (1.13 V). The corresponding values for Cu/CeO₂(100) and Cu/CeO₂(111) were FE_C2H4 ≈ 31.8% and FE_C2H4 ≈ 29.6%, respectively. The C₂H₄ selectivity was comparable to that of many reported Cu-based electrocatalysts at similar overpotentials. Furthermore, the FE for C₂H₄ remained stable even after 6 h of continuous electrolysis. The superior ECR activity of Cu/CeO₂(110) to yield C₂H₄ was attributed to the metastable (110) surface, which not only promoted the effective adsorption of CO₂ but also remarkably stabilized Cu⁺, thereby boosting the ECR to produce C₂H₄. This work offers an alternative strategy to enhance the ECR efficiency by crystal facet engineering.     

碳纤维微电极负载金纳米粒子用于绿茶中儿茶素的检测

本文开发了基于纳米金修饰的碳纤维超微电极(CFME)用于儿茶素的定量检测。通过使用柠檬酸三钠还原氯金酸制得纳米金粒子(AuNPs),采用恒电位电沉积法将纳米金修饰在CFME表面。在pH 2.00的Tris-HCl缓冲溶液中,采用差分脉冲法和循环伏安法考察了修饰前后电极对儿茶素的电催化性能。结果表明,纳米金修饰电极对儿茶素具有明显的电催化效果。在优化实验条件下,纳米金修饰的碳纤维超微电极(AuNPs/CFME)与儿茶素浓度在1.00×10^-3~10.0μmol/L范围内呈良好的线性关系,且AuNPs/CFME的电化学性能非常稳定,具有良好的重现性。该方法操作简单,准确性高,可用于对儿茶素进行定量检测。     

电化学部分氟化芳基研究进展

含氟芳香化合物具有生物活性好、稳定性高、易被生物体代谢等优点,在医药和农药领域有着广泛的用途.目前芳基部分氟化的方法主要分为依赖于氟化试剂的亲电氟化方法以及反应条件苛刻甚至需要过渡金属催化的亲核氟化方法,这些方法操作繁琐并且污染环境.电化学氟化将"电能"作为一种"强氧化剂"来实现氟化反应,是一种直接、绿色且温和的氟化手...