Partially Oxidized Graphene/Metallic Single‐Walled Carbon Nanotubes Film‐Coated Electrode for Nanomolar Detection of Dopamine

Enriched metallic single‐walled carbon nanotubes (mSWCNTs) were dispersed in aqueous solution of partially oxidized graphene (po‐Gr). As‐prepared po‐Gr/mSWCNTs suspension was used to modify glassy carbon electrode (GCE) surface, which showed high electrocatalytic activity for dopamine (DA) oxidation in pH 7.0 phosphate buffered saline (PBS) solution. Using po‐Gr/mSWCNTs/GCE we could detect DA from 350 to 3600 nM, with a detection limit down to 25 nM in physiological condition (in pH 7.0 PBS); whereas, po‐Gr/GCE (without mSWCNTs) and bare GCE produced measurable signals only at or above 200 nM DA. Thus, the po‐Gr/mSWCNTs film we fabricated is a promising nanomaterial for fabrication of biosensors for nanomolar detection of DA.     

Evolution of Vanadium Redox Flow Battery in Electrode

The vanadium redox flow battery (VRFB) is a highly regarded technology for large-scale energy storage due to its outstanding features, such as scalability, efficiency, long lifespan, and site independence. This paper provides a comprehensive analysis of its performance in carbon-based electrodes, along with a comprehensive review of the system‘s principles and mechanisms. It discusses potential applications, recent industrial involvement, and economic factors associated with VRFB technology. The study also covers the latest advancements in VRFB electrodes, including electrode surface modification and electrocatalyst materials, and highlights their effects on the VRFB system‘s performance. Additionally, the potential of two-dimensional material MXene to enhance electrode performance is evaluated, and the author concludes that MXenes offer significant advantages for use in high-power VRFB at a low cost. Finally, the paper reviews the challenges and future development of VRFB technology.     

Pt／C气体扩散电极制备方法的探索

Ｐｔ／Ｃ气体扩散电极制备方法的探索马永林（青海教育学院,青海,西宁８１０００８）以Ｐｔ／Ｃ为电催化剂的气体扩散电极的制备方法是直接影响该电极电化学性能的重要因素。一般的制备方法是基于将Ｐｔ／Ｃ电催化剂和聚四氟乙烯以及某些有机物或表面活性剂的糊状物涂布...     

原位Raman光谱揭示中性条件下硫化钼结构变化对其电催化析氢反应的促进作用

硫化钼是析氢反应(HER)有前途的电催化剂. S-或Mo物种均被认为是形成吸附氢触发HER反应的活性位, 但Mo中心和S配体间相互作用的本质仍不清楚. 另外, 采用中性的水作为质子源用于产氢, 来开发低成本的水裂解催化剂体系为研究者高度关注, 但人们很少研究中性水条件下HER反应的机理. 本文采用原位电化学Raman光谱对所合成的硫化钼中Mo-Mo和S-S物种在中性条件下的结构变化进行了监测. 结果显示, 归属于端位S-S物种的谱带随着Mo-Mo, Mo3-μ3S和Mo-S振动谱带频率而同步变化, 表明Mo-Mo键与端位S-S键起着协同作用, 从而有利于氢气的生成. 这可能是通过三核Mo3-μ3S物种的内部重组而确认的. 本文所揭示的HER反应中金属-配体相互作用的本质与作用表明了一个不同的反应机理, 而以往的机理认为, S或Mo活性位独立起作用而促进HER反应的进行.     

氮掺杂纳米碳块的制备及氧还原的高电化学催化活性

面对全球化的能源危机,燃料电池由于其高效性和可重复使用性成为越来越具有潜力的能量转化设备.阴极发生的氧气还原反应对于燃料电池的性能十分重要,寻找高效的氧还原催化剂在很大程度上可以提高燃料电池的性能.传统的氧还原催化剂是贵金属铂,但是铂的价格十分高,较差的稳定性和选择性限制了它的商业化应用,因此找到一种廉价高效的非贵金属氧还原催化剂来代替铂基催化剂成为目前的研究热点.我们最近发现将纯的三羟甲基氨基甲烷置于管式炉中在800°C下真空烧制2 h,可以简单快捷地得到一种含 N量为4.11%的纳米碳块(标记为 NCNBs-800),该材料可用于催化电化学氧气还原反应.同样情况下在700和900°C下合成的材料标记为 NCNBs-700和 NCNBs-900.采用傅里叶变换红外光谱(FTIR)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、X射线衍射(XRD)和电化学旋转圆盘方法与技术对催化剂的成分、形貌和电催化性能进行了表征. SEM表明 NCNBs-800为直径为60 nm的碳块,用 FTIR手段表征了 NCNBs-800的结构变化,三羟甲基氨基甲烷中的–OH和–NH2在高温下发生消去反应,形成了饱和度不同的 C–N键和 C–C键.这些饱和度不同的 N原子和 C原子增加了材料的缺陷结构和活性位点,进一步促进了氧还原反应的催化性能.采用 XPS分析了 NCNBs-800表面的元素,通过对 N 1s进行分峰拟合,发现 NCNBs-800含有能促进氧还原性能的吡啶-N和吡咯-N,特别是吡啶-N,它吸电子的能力很强,从而导致与它邻近的 C原子表面具有一定的正电荷,这些正电荷促进了氧气的吸附和还原,为氧气还原反应提供活性位点,促进氧气还原反应的发生. XRD结果表明,三羟甲基氨基甲烷热解前后的 XRD谱图有明显变化,热解后的三羟甲基氨基甲烷呈现两个宽峰,代表着杂化碳的存在. NCNBs-800的衍射峰强度比 NCNBs-700以及 NCNBs-900大,但是宽度则比 NCNBs-700以及 NCNBs-900小,这表明800°C有利于材料的石墨烯化及碳化过程.电化学阻抗可以表明修饰电极的表面性质,阻抗图中高频处半圆的直径大小代表电子转移阻力,低频处的线性部分代表扩散过程.阻抗数据表明, NCNBs-800的电荷转移电阻可与 Pt/C催化剂相比,但是比裸露的玻碳电极小.这表明 NCNBs-800有较好的导电性和电化学性质. CV曲线表明 NCNBs-800氧还原的起始电位是-0.05 V (vs Ag/AgCl),氧气的还原电位是0.20 V (vs Ag/AgCl),说明 NCNBs-800具有良好的电化学催化性能.旋转环盘电极仪测得的氧还原极化曲线表明,在-0.3 to-0.8 V下的 NCNBs-800氧还原的电子转移数为3.4,过氧化氢产率为52%-35%,表明 NCNBs-800呈现一个提高的四电子过程.稳定性对于燃料电池氧气还原反应也是一个十分重要的性能,通过计时电流技术在电压为-0.2 V下对 NCNBs-800与 Pt/C进行了稳定性测试.结果表明,在2500 s之后 NCNBs-800相对于它的最初催化活性损失为17.56%,而 Pt/C损失了30.71%,从而说明 NCNBs-800的稳定性优于 Pt/C.总之,我们通过一步热解的简易技术制备了一种氮掺杂纳米碳材料,该碳材料具有廉价、高效和容易制备等特点,具有良好的电化学催化性能,有望在燃料电池氧化还原反应中得到大规模应用.     

Electrochemical aspects of sol-gel synthesized MgCoO2 for aqueous supercapacitor and alkaline HER electrocatalyst applications

We report here the cost-effective synthesis of Magnesium Cobalt Oxide (MgCoO₂) sample by the sol-gel synthesis route labeled as MCO - 3. In presence of aqueous 1 M Lithium Sulphate (Li₂SO₄) electrolyte, we obtained a capacitance of 56 F/g, an energy density of 38 Wh/kg and a capacitance retention of 92.53 % (at 5 A/g) after undergoing 1000 charge-discharge cycles. For the aqueous 1 M Sodium Perchlorate (NaClO₄) electrolyte system, we found the capacitance, energy density and capacitance retention of 47 F/g, 31 Wh/kg and 91.41% (at 3.5 A/g for 1000 charge-discharge cycles), respectively. These results establish MgCoO₂ as suitable electrode material in aqueous lithium-ion and sodium-ion supercapacitor devices. Further, MCO - 3 in the presence of aqueous 1 M Potassium Hydroxide (KOH) electrolyte showed an overpotential of 400 mV and a Tafel slope of 174 mV/dec, making it a suitable candidate for alkaline Hydrogen Evolution Reaction (HER) electrocatalyst.     

聚合物电解质膜燃料电池薄电极制备技术的研究

为降低聚合物电解质膜燃料电池 (PEMFC)电极中铂的载量 ,本文建立一种新的薄电极制备技术 (TEFT) ,制备了表面平滑、颗粒分布均匀的低铂载量电极 .结果表明当电极的铂载量为 1mg/cm2 ,用Nafion 117膜作电解质时 ,电池的最大功率密度达 0 30W·cm-2 .系统地考察了阴极中不同PTFE和Nafion含量对PEMFC性能的影响 .     

Functional Electrospun Nanocomposites for Efficient Oxygen Reduction Reaction

Electrospinning with a simple and controllable process has extremely received considerable concerns by virtue of the fabrication and development of nanofibers. Moreover, nanofibers are playing an increasing impact on energy conversion and storage devices, especially for fuel cells based on oxygen reduction reaction(ORR), in view of the rich porosity, large surface area, excellent mass transportation and simply tunable composition, as well as good mechanical strength. In this review, we mainly introduce the primary principle of electrospinning technique, electrochemical reaction mechanism of ORR and synthetic strategies, and summarize the recent advances of unique non-noble-metal nanofibers on the basis of metal-organic framework(MOF) derivatives, single-atom catalysts(SACs) and transition metal oxides. More importantly, we emphasize on the influences of the components, morphology and architecture of advanced electrospun catalysts on their correspon-ding electrochemical performances towards ORR. Finally, the remaining puzzles and perspectives for further development of the electrospinning nanofibers involving electrocatalysis are presented. It is envisioned that this review would offer an important direction in designing novel electrocatalysts based on electrospinning nanofibrous structures and developing their potential.     

金属-氧共价性增强的缺陷态高熵岩盐型氧化物用于电催化析氧

高熵材料可以在单一晶相中引入五种或五种以上元素以优化电子结构和配位环境,可作为一类新兴的电催化剂.本文制备了一种岩盐型高熵氧化物Mg0.2Co0.2Ni0.2Cu0.2Zn0.2O(HEO)用于催化氧析出反应(OER).由于相邻的不同金属离子晶格失配,所制备的HEO具有丰富的缺陷.此外,电负性更小的Mg和Zn元素的存在...     

利用机器学习靶向设计先进电催化剂

随着能源需求增长与化石燃料资源枯竭之间的矛盾日益突出,以及石油、天然气等不可再生资源的燃烧带来的环境问题和全球变暖,清洁可再生能源越来越受到人们的重视.因此,包括能源转换和可逆能源使用等的可持续发展技术受到广泛关注.其中,电催化被认为是清洁能源转化的重要方法.目前,电催化反应的催化剂仍以贵金属为主.但贵金属昂贵的价格极...