基于SSPCM的新型储能型太阳能蒸馏器实验研究

本文基于定型相变材料(SSPCM)建立了新型储能型太阳能蒸馏器的实验系统,并分别对普通SSPCM和高导热SSPCM的蒸馏特性进行了实验研究.研究发现:与传统太阳能蒸馏器相比,基于普通SSPCM的储能型蒸馏器的日产量提升了 7.5％,采用高导热SSPCM的日产量提升了 39％.此外,本文还对蒸馏器结构进行了优化研究,研制...     

气相生长氮化铝单晶的新方法

通过在钨坩埚盖开小孔的方法改变氮化铝结晶衬底上的温度场分布,在开孔处形成局部低温区;由于孔的几何尺寸的限制和氮化铝晶体生长的各向异性,开孔处的氮化铝晶体单晶化;随后,开孔处的单晶起籽晶的作用,逐渐长成较大尺寸、较高质量的氮化铝单晶.目前用该方法已经制备出直径大于2mm的氮化铝单晶体.     

Laser cladding of copper with molybdenum for wear resistance enhancement in electrical contacts

Laser cladding of Mo on Cu has been attempted with the aim of enhancing the wear resistance and hence increasing the service life of electrical contacts made of Cu. In order to overcome the difficulties arising from the large difference in thermal properties and the low mutual solubility between Cu and Mo, Ni was introduced as an intermediate layer between Mo and Cu. The Ni and Mo layers were laser clad one after the other to form a sandwich layer of Mo/Ni/Cu. Excellent bonding between the clad layer and the Cu substrate was ensured by strong metallurgical bonding. The hardness of the surface of the clad layer is seven times higher than that of the Cu substrate. Pin-on-disc wear tests consistently showed that the abrasive wear resistance of the clad layer was also improved by a factor of seven as compared with untreated Cu substrate. The specific electrical contact resistance of the clad surface was about 5.6 × 10⁻⁷ Ω cm².     

Comparative study on transport properties of N-, P-, and As-doped SiC nanowires: Calculated based on first principles

According to the one-dimensional quantum state distribution, carrier scattering, and fixed range hopping model, the structural stability and electron transport properties of N-, P-, and As-doped SiC nanowires(N-SiCNWs, P-SiCNWs, and As-SiCNWs) are simulated by using the first principles calculations. The results show that the lattice structure of NSiCNWs is the most stable in the lattice structures of the above three kinds of doped SiCNWs. At room temperature,for unpassivated SiCNWs, the doping effect of P and As are better than that of N. After passivation, the conductivities of all doped SiCNWs increase by approximately two orders of magnitude. The N-SiCNW has the lowest conductivity. In addition, the N-, P-, As-doped SiCNWs before and after passivation have the same conductivity–temperature characteristics,that is, above room temperature, the conductivity values of the doped SiCNWs all increase with temperature increasing.These results contribute to the electronic application of nanodevices.     

石墨烯纳米带电极区N掺杂电子输运性质研究

运用密度泛函理论和非平衡格林函数结合的方法,研究电极区N掺杂对扶手椅型石墨烯纳米带电子输运特性的影响.结果表明,与本征扶手椅型石墨烯纳米带电流-电压曲线相比,宽度为7的石墨烯纳米带电流-电压曲线表现出明显的不对称性,其中心N掺杂表现强烈的整流特性,整流系数达到102数量级,且将N原子从电极区中心位置移动到边缘,整流特性减弱.研究结果表明宽度为7的扶手椅型石墨烯纳米带出现强整流现象的原因主要是负向偏压下能量窗内没有透射峰引起的,该研究结果对将来石墨烯整流器件的设计具有重要的意义.     

二维多群辐射输运程序LARED-R-1的并行化

利用有向图描述数据依赖关系,应用已有的并行流水线通量扫描算法,实现基于非协调网格的二维辐射输运程序LARED-R-1的并行化.同时,采用消息缓冲技术提高并行程序的性能.经测试,对于典型的问题规模(100群、3800个网格单元、40个方向),在某并行机的64个和128个处理器上,并行程序分别获得80%和53%的并行效率.     

一种模拟热导率的非平衡分子动力学方法

提出一种计算热导率的非平衡分子动力学(NEMD)方法,通过构造均匀内热源获得抛物线形温度分布,并基于Fourier导热定律计算热导率,与Müller-Plathe发展的反扰动非平衡分子动力学(RNEMD)方法相比,不仅具有能量动量守恒和收敛性好的优点,还克服了常规NEMD方法中热冷源区域存在局域热力学非平衡的问题,并有模拟系统温差影响小的特点.对液态氩的热导率进行模拟并与RNEMD方法的模拟结果进行对比.     

一维线性非共轭石墨烯基(CH2)n分子链的电子输运

一维非共轭烷烃链虽不具富电子或少电子特征,但常存在于单分子器件或多肽、蛋白质等生物分子中,对电子传输产生重要影响.为理解这类物质的电子输运特征,本研究设计了一维线性非共轭(CH2)n分子结模型,并利用密度泛函理论结合非平衡态格林函数的方法,对(CH2)n(n=1—12)线性分子链与两个石墨烯电极耦合而成的分子结进行了第...     

Electrical, dielectric and surface wetting properties of multi-walled carbon nanotubes/nylon-6 nanocomposites

This paper reports that the multi-walled carbon nanotubes(MWCNT)/nylon-6 (PA6) nanocomposites with different MWCNT loadingshave been prepared by a simple melt-compounding method. Theelectrical, dielectric, and surface wetting properties of theCNT/PA6 composites have been studied. The temperature dependence ofthe conductivity of the CNT/PA6 composite with 10.0 wt{\%} CNTloading ($\sigma _{\rm RT} \sim 10^{-4}$ S/cm) are measured, andafterwards a charge-energy-limited tunnelling model (ln $\sigma (T)\sim T^{-1/2})$ is found. With increasing CNT weight percentage from0.0 to 10.0 wt%, the dielectric constant of the CNT/PA6composites enhances and the dielectric loss tangent increases twoorders of magnitude. In addition, water contact angles of theCNT/PA6 composites increase and the composites with CNT loadinglarger than 2.0 wt%even become hydrophobic. The obtainedresults indicate that the electrical and surface properties of thecomposites have been significantly enhanced by the embedded carbonnanotubes.     

3ω方法及其在纳米材料器件表征中的应用

阐明了3ω方法的机理，并在此基础上讨论了它的一些基本应用.利用3ω方法可以对具有优 良导热和导电能力的材料的热导率和热容进行测量；对不能导电的材料，固态的或液态的， 利用3ω方法能对它们的热导率进行测量.对测量中涉及到的热辐射问题的讨论表明，由于使 用的是小样品，热辐射造成的影响可以忽视.通过理论推导，使用二维隧穿结点阵并借助3ω 方法，可以给出一种性能良好的二维库仑阻塞测温法. 关键词： 3ω方法 热容（定压） 热导率 库仑阻塞