Alteration of the profile of ink-jet-deposited UV-cured lenses using applied electric fields

Microlens arrays and microoptical components in general are integral components in a wide range of high-tech products. The ability to fabricate such elements cheaply and with a high degree of accuracy is vital for the development of the next generation of optics-based technologies. There are currently a wide range of microoptical element fabrication technologies. These techniques all have advantages and disadvantages and no one technique is yet sufficient to meet all possible application criteria. One method that has been examined recently is the ink-jet deposition method. This method applies well-established ink-jet printer technology and is thus one possible candidate for large-scale fabrication of inexpensive components. The lenses fabricated using this method are normally found to have spherical profiles. In this paper, we examine the possibility of modifying the profile of these spherical lenses using an applied electric field (E-field). We note that the resulting aspheric lenses have a wide number of applications. These include beam shaping and power transfer applications including fiber coupling. In this paper we describe initial experiments involving single lenses. The single lenses produced using applied E-Fields differ significantly from lenses produced with no applied E-field.     

Assessing the effect of a barrier between two rooms subjected to low frequency sound using the boundary element method

The boundary element method (BEM) has been used to compute the acoustic wave propagation through a single vertical panel, which separates two rooms, made of concrete, when one of the rooms is excited by a steady-state, spatially sinusoidal, harmonic line load pressure at low frequencies. This work focuses on how the connection of the panel to the ceiling affects the acoustic insulation provided by the wall. Perfect double-fixed partitions and acoustic barrier-type structures with differently-sized gaps between the ceiling and the barrier are studied. The BEM model is formulated in the frequency domain and takes the air-solid interaction fully into account. Insulation dips are localised in the frequency domain and identified with dips associated with both the wall's natural dynamic vibration modes and with those associated with the air in the rooms. The influence of the wall's thickness on acoustic insulation is also analysed. The computed results obtained with the acoustic barrier type structure are compared with those obtained by a rigid model. The importance of the rooms' surface conditions is assessed, modelling the rooms with cork.     

Optimal generation scheduling for constrained multi-area hydrothermal power systems with cascaded reservoirs

The optimization problem in this paper is targeted at large-scale hydrothermal power systems. The thermal part of the system is a multi-area power pool with tie-line constraints, and the hydro part is a set of cascaded hydrostations. The objective is to minimize the operation cost of the thermal subsystem. This is an integer nonlinear optimization process with a large number of variables and constraints. In order to obtain the optimal solution in a reasonable time, we decompose the problem into thermal and hydro subproblems. The coordinator between these subproblems is the system Lagrange multiplier. For the thermal subproblem, in a multi-area power pool, it is necessary to coordinate the area generations for reducing the operation cost without violating tie limits. For the hydro subsystem, network flow concepts are adopted to coordinate water usage over the entire study time span, and the reduced gradient method is used to overcome the linear characteristic of the network flow method in order to obtain the optimal solution. In this study, load forecasting errors and forced outages of generating units are incorporated in system reliability requirements. Three case studies for the proposed method are presented.     

A novel high-resolution interference spectrometer

A novel precision wavemeter is presented with a resolution of better than 0·01 nm. A Sagnac interferometer with two diffraction gratings forms the basis of the instrument. Using spatial heterodyning techniques and a CCD camera/frame grabber data acquisition system allows fast computer control and power spectrum analysis. The mode structure and mode hopping characteristics of a typical laser diode were examined as a function of diode injection current.     

Relative densities of hydrogen ion species in a hollow cathode glow discharge

Highly resolved Doppler shifted peaks of the hydrogen Balmer lines, resulting from charge exchange of H⁺, H₂⁺, and H₃⁺ with an H₂ gas target, were obtained without the need for a deconvolution procedure. This enabled the unambiguous determination of the chemistry of these hydrogen species in the units of mTorr pressure range. This was obtained from a gaseous discharge using a biconical hollow cathode that yielded a well collimated and monoenergetic beam.     

OTL电路中点电压稳定性三次择优

本文用“稳健设计”的观点，分别对ＯＴＬ电路中点电压稳定性“系统择优”，“参数择优”及“容差择优”作出较为系统的介绍     

Studies on erosion of silicone rubber exposed to partial arc discharges

The effect of electrolyte conductivity on the partial arc discharge development between two electrolyte electrodes on a silicone rubber sheet surface was investigated. Tests were executed by placing the salt-waterlogged glass-filter paper on a silicone rubber sheet to simulate a polluted electrolyte layer, and partial arc discharges with a constant current value of 10 mA were observed. It was found that the formation of an arc channel and a temperature distribution on the sample surface varied with the electrolyte conductivity. In addition, the relation between the electrolyte conductivity and the weight loss due to the heat erosion of specimens was also investigated by a 3D morphological observation and a simulated calculation. The partial arc discharge did significantly not influence on the sample surface erosion under serious polluted conditions. In contrast, the severest erosion appeared under the light pollution with comparatively lower conductivity of the electrolyte electrodes.     

An error estimate on a Galerkin method for modeling heat and moisture transfer in fibrous insulation

We propose a Galerkin finite element method for numerically modeling the process of heat and moisture transfer in porous clothing assemblies, which takes into account radiative heat transfer and sorption of water vapor into the fibers of the medium. We prove an optimal‐order error estimate for the finite element method in energy norm. © 2007 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2008     

The influence of some fuzzy implication operators on the accuracy of a fuzzy model-part II

The influence of fuzzy implication operators and the connective Also on the accuracy of a fuzzy model of a d.c. series motor is considered. Some typical fuzzy implication operators are applied to the construction of a fuzzy model of a d.c. series motor. A root-mean-square error is used as the criterion of the fuzzy model's adequacy to the real system. A number of mathematical operations necessary for the implementation of the fuzzy model are used as the criterion by which the fuzzy model's applicability if estimated from the point of view of computing techniques. The best types of fuzzy relations, representing fuzzy models of a real system, are chosen in order to secure the least root-mean-square error with minimal number of mathematical operations necessary for computer implementation.     

重复率气体火花开关绝缘恢复特性的实验研究

 在自行设计的气体火花开关上，利用双脉冲回路，对纳秒脉冲作用下N₂和H₂的绝缘恢复特性进行了实验研究。结果表明，在静态不吹气情况下，H₂的绝缘恢复时间明显比N₂短。在吹气情况下，适当的气流速度即可使绝缘恢复时间明显缩短。