Supply chain analysis under a price-discount incentive scheme for electric vehicles

We investigate an automobile supply chain where a manufacturer and a retailer serve heterogeneous consumers with electric vehicles (EVs) under a government’s price-discount incentive scheme that involves a price discount rate and a subsidy ceiling. We show that the subsidy ceiling is more effective in influencing the optimal wholesale pricing decision of the manufacturer with a higher unit production cost. However, the discount rate is more effective for the manufacturer with a lower unit production cost. Moreover, the expected sales are increasing in the discount rate but may be decreasing in the subsidy ceiling. Analytic results indicate that an effective incentive scheme should include both a discount rate and a subsidy ceiling. We also derive the necessary condition for the most effective discount rate and subsidy ceiling that maximize the expected sales of EVs, and obtain a unique discount rate and subsidy ceiling that most effectively improve the manufacturer’s incentive for EV production.     

Optimal Conditions for Existence of Vesicles Under Electric Field

Giant vesicles have been of intense interest as the model system for cell membranes. To bring numerous applications of the vesicles into full play, the existence time of the vesicles becomes particularly important. In this work, we explored the existence time of the vesicles in distilled water under four kinds of representative alternative current (AC) electric fields with different energizing time. When the application time of AC electric field reached 1 hour, the existence time of the vesicles reached the maximum value. As the applied electric field time increased, the existence time of the vesicles decreased. Thus, after obtaining the best vesicles on the carbon fiber electrode, disconnecting the external electric field is very necessary. Based on the in situ observation using inverted microscope, the disappearing phenomena of the vesicles were presented. In addition, it is found that vesicles in phosphate buffer solutions (PBSs) can last about 2–3 days when the electric field was applied for 1 hour, which was much longer than that in distilled water.     

Electric field control of exciton states in quantum dot molecules

Semiconductor nanostructures have attracted considerable interest during the recent years in view of the potential application in quantum information processing. In particular, quantum dots have been suggested to fulfill an essential requirement for quantum computation: controllable interaction that couples two quantum dot qubits. Previous experiments on two vertically aligned quantum dots have demonstrated the formation of coupled exciton states. We show that this coupling between two In_0.60Ga_0.40As/GaAs quantum dots can be tuned by an electric field applied along the molecule axis. This controllable coupling in such a relatively simple configuration could be implemented in a solid-state-based quantum device.     

Electro-optic mapping systems of electric-field using CW laser diodes

Two novel systems are proposed to perform the electro-optic (EO) mapping of the electric-field strength close to electrode structure using CW laser diodes. By these systems, mappings of both static (DC) and high-frequency electric-field can be obtained. For the static field, the field is chopped to increase the sensitivity performance. For the high-frequency field, an intensity modulation laser, instead of a pulse laser, is used to perform the mapping measurement in frequency domain, instead of in time domain. This approach greatly simplifies the system. An experiment set-up using a vertical cavity surface emitted laser diode (VCSEL) of a wavelength 850 nm and its mapping results for a coplanar waveguide (CPW) with the signal frequency around 1 GHz are reported.     

More accurate breakdown voltage estimation for the new step-up test method in the gumbel distribution model

The estimation problems for the conventional step-up method (the observed breakdown voltages are not given at all) and the new step-up method (some of the observed breakdown voltages are given) are analyzed when the underlying probability distribution (of breakdown voltage level) is assumed to be gumbel distributions for minima and maxima. The new step-up test method has advantages compared to the conventional method: (1) the confidence intervals of the estimates become smaller and (2) the estimates can be obtained with higher probability. In some case of real step-up breakdown voltage test, a fit of the gumbel distribution to the data case is found to be superior to that of the normal distribution, which suggests the usefulness of the gumbel distribution for the underlying distribution in the step-up breakdown voltage test.     

电场作用下紫膜中细菌视紫红质的圆二色性研究

垂直于测量光束的外电场对紫膜水悬浮液中的细菌视紫红质的圆二色性有很大影响。５０Ｈｚ正弦交流电场作用下产生５６８ｎｍ的正的差圆二色性峰，反向电脉冲串作用下产生５５６ｎｍ左右的负的差圆二色性峰，两峰峰位均未显示有随电压的变化而移动；但是，强度随外加电压的半加而增强；撤去电场后该两峰均即该消失。分析认为，电场下细菌视紫红质中存在柔性结构变化，这种结构变化也可用于存储信息。     

A continuation and existence result for a boundary value problem on an unbounded domain arising for the electrical potential in a cylindrical double layer

Using a continuation theorem for contractions, the existence, uniqueness, and an approximation method for a class of nonlinear boundary value problems on an unbounded interval is obtained. The results apply in particular to the problem in the title.     

新型列车侧墙内装板声学分析、优化及应用*

为了开发与应用新型列车车体降噪内装结构,基于混合FE-SEA法对轨道车辆用新型橡胶泡棉夹芯板进行隔声与声辐射预测建模,并进行了试验验证,进而利用该模型分析了橡胶泡棉孔隙率与芯皮厚度比对其隔声性能、声辐射性能的影响规律,并通过敷设阻尼层优化了其声学性能。最后,在侧墙组合结构的声学设计中评价了其实际应用效果。结果表明：随着孔隙率的逐步下降,橡胶泡棉夹芯板隔声量上升趋势较为明显,而辐射声功率持续降低;随着芯皮厚度比的逐步提高,夹芯板隔声量呈略微上升趋势,辐射声功率则相应降低。在远离声源一侧的橡胶泡棉蒙皮外侧敷设阻尼层的效果最优,优化后夹芯板计权隔声量提高0.7dB,总声功率级降低0.7dB;相较于传统木质胶合板和铝蜂窝板,橡胶泡棉夹芯板相较于传统内装板材在结构隔声设计中具有轻量化优势。     

Backscatter factor and absorption ratio of fibrous zirconia media in the visible

Fibrous thermal insulations are widely used to conserve energy in ambient to high temperature applications including buildings, solar collectors, heat exchangers, furnaces and thermal protection systems of reusable launch vehicles. It has long been recognised that zirconia has the lowest thermal conductivity of commercial refractories. The thermal conductivity of a zirconia fibrous medium is strongly dependent of its bulk density; high bulk densities of zirconia fibers provide the most effective insulation at high temperatures. Lee's theory for radiative transfer through fibrous media is used in this paper. The two-flux model is applied to determine the backward and forward parameters of a medium of zirconia fibers oriented in parallel planes. Theoretical calculations of the backscatter factor and absorption ratio of this medium are carried out in the visible spectrum for different size parameters of the fibers and for three different temperatures. Our results show that the backscatter factor of zirconia fibrous insulations is maximum, and therefore the heat transfer by the fibrous medium is the lowest, for a size parameter of 0.45 for all the temperatures studied. We also observed that the backscatter factor decreases with increasing temperature.