Assessing the relationship between the inter-rod coupling and the efficiency of piezocomposite high-intensity focused ultrasound transducers

The electroacoustic conversion efficiency of the ultrasonic transducer is a critical performance index for high-power applications. The material properties, volume fraction (VF) and aspect ratio (AR) are typically regarded as the design parameters of the piezocomposite transducer. We hypothesized that the spacing between piezoelectric rods was also a dominant factor. Therefore, the inter-rod coupling effects on the efficiency of 1–3 piezocomposite ultrasonic transducers were investigated in this study. The efficiencies of six flat and three curved 1.0 MHz PZT4 epoxy composite transducers with different geometric parameters were measured. Finite element transient analyses of the inter-rod electrical-mechanical coupling in the composites were carried out to explain the measured results. The experimental results showed that for 0.47 AR, the 79% VF transducers had lower efficiency than the 64% VF and 53% VF transducers. For 0.19 AR, the efficiency of the 59% VF transducer was not greater than the efficiency of the 39% VF transducer. Numerical analyses demonstrated that the positive peak voltage induced by the coupling of the side rods was more than twice the level induced by the coupling of the diagonal rods for any spacing. The diagonal coupling voltage peak did not change for spacings larger than 0.2 mm. Moreover, for spacings of 0.05 and 0.1 mm, the inter-rod coupling caused 24% and 20% waveform shifts of the driving voltage, respectively, while the 0.2 mm spacing coupling caused a 14% reduction in the amplitude of the driving voltage. As a result, the asymmetry of the driving voltage degraded the efficiency of the composite transducers and became more severe when the spacing was decreased. We concluded that the efficiency loss induced by inter-rod coupling as a function of spacing should be considered when designing piezocomposite transducers.     

直接辐射式扬声器系统的低频效率计算公式*

效率是扬声器系统的重要性能指标,然而常用的标称效率在低频范围并不适用。本文研究直接辐射式扬声器系统的低频效率,推导了基于TS参数的低频效率计算公式。针对封闭式扬声器系统和倒相式扬声器系统,开展实验验证,结果表明本文提出的计算公式得到的低频效率与实验测量得到的低频效率较为相符。进一步对比分析低频效率和标称效率,结果表明低频效率能够适用于低频,能准确地展示扬声器系统参数对效率的影响。利用本文提出的计算公式,有助于进一步优化提升扬声器系统的低频效率。     

Two-dimensional efficiency decomposition to measure the demand effect in productivity analysis

This paper proposes a two-dimensional efficiency decomposition (2DED) of profitability for a production system to account for the demand effect observed in productivity analysis. The first dimension identifies four components of efficiency: capacity design, demand generation, operations, and demand consumption, using Network Data Envelopment Analysis (Network DEA). The second dimension decomposes the efficiency measures and integrates them into a profitability efficiency framework. Thus, each component’s profitability change can be analyzed based on technical efficiency change, scale efficiency change and allocative efficiency change. An empirical study based on data from 2006 to 2008 for the US airline industry finds that the regress of productivity is mainly caused by a demand fluctuation in 2007-2008 rather than technical regression in production capabilities.     

Improved efficiency droop characteristics in an InGaN/GaN light-emitting diode with a novel designed last barrier structure

<正>In this study,the characteristics of nitride-based light-emitting diodes with different last barrier structures are analysed numerically.The energy band diagrams,electrostatic field near the last quantum barrier,carrier concentration in the quantum well,internal quantum efficiency,and light output power are systematically investigated.The simulation results show that the efficiency droop is markedly improved and the output power is greatly enhanced when the conventional GaN last barrier is replaced by an AlGaN barrier with Al composition graded linearly from 0 to 15% in the growth direction.These improvements are attributed to enhanced efficiencies of electron confinement and hole injection caused by the lower polarization effect at the last-barrier/electron blocking layer interface when the graded Al composition last barrier is used.     

三步迭代求解非线性方程组(英文)

本文给出求解非线性方程组具有六阶精度的三步迭代方法,理论上给予了证明。并且与Jae Heon Yun提出的有四阶精度的三步迭代方法相比有比较大的改进。最后给出数值例子,对几种不同的迭代方法进行比较,数值结果显示给出的方法与理论结果一致。     

Improvement of characteristics of an InGaN light-emitting diode by using a staggered AlGaN electron-blocking layer

The optical and physical properties of an InGaN light-emitting diode (LED) with a specific design of a staggered AlGaN electron-blocking layer (EBL) are investigated numerically in detail. The electrostatic field distribution, energy band, carrier concentration, electroluminescence (EL) intensity, internal quantum efficiency (IQE), and the output power are simulated. The results reveal that this specific design has a remarkable improvement in optical performance compared with the design of a conventional LED. The lower electron leakage current, higher hole injection efficiency, and consequently mitigated efficiency droop are achieved. The significant decrease of electrostatic field at the interface between the last barrier and the EBL of the LED could be one of the main reasons for these improvements.     

共孔径偏振耦合分光的旋转四分之一波片相位补偿技术

 在地平式折轴望远镜中开展自适应光学激光导星实验,研究了共孔径发射接收信标激光束偏振耦合分光效率随望远镜方位角和天顶角变化的补偿技术。提出了一种由四分之一波片和法拉第旋光器构成的相位补偿器,通过旋转四分之一波片以实时补偿由于望远镜旋转导致的光路相位延迟量的变化。数值计算表明,望远镜处于任意方位角和天顶角位置时,通过1°步长旋转四分之一波片,可使补偿后的偏振分光效率理论上达到99.90％以上。实验从原理上定性地验证了该方法的有效性。只要测量出镜面的相位延迟,便可计算得到望远镜处于不同方位角和天顶角情况下有效补偿所需的四分之一波片旋转角度,据此可建立实用的旋转波片偏振补偿装置。     

Efficiency fairness tradeoff in battery sharing

The increasing presence of decentralized renewable generation in the power grid has motivated consumers to install batteries to save excess energy for future use. The high price of energy storage calls for a shared storage system, but careful battery management is required so that the battery is operated in a manner that is fair to all and as efficiently as possible. In this paper, we study the tradeoffs between efficiency and fairness in operating a shared battery. We develop a framework based on constrained Markov decision processes to study both regimes, namely, optimizing efficiency under a hard fairness constraint and optimizing fairness under hard efficiency constraint. Our results show that there are fundamental limits to efficiency under fairness and vice-versa, and, in general, the two cannot be achieved simultaneously. We characterize these fundamental limits via absolute bounds on these quantities, and via the notion of price of fairness that we introduce in this paper.     

Reconciling ratio analysis and DEA as performance assessment tools

The assessment of operational performance remains a fundamental challenge both in practice and in theory. Data envelopment analysis (DEA) is one method developed in production economic theory and applied by researchers to study groups of enterprises. In practice, individual enterprises almost universally rely on simple output–input ratios. Each approach has its strengths and weaknesses, but the theoretical connection between the two has not been fully articulated. This paper uses the framework of DEA to establish a mathematical relationship between DEA efficiency scores and corresponding ratio analysis. The relationship can be expressed as a product of seven components: technical efficiency, technical change, scale efficiency, input slack factor, input substitution factor, output slack factor and output substitution factor.