聚丙烯纤维辐射接枝进展

本文对聚丙烯纤维的辐射接枝方法、特征和机理、以及其研究进展和表征进行了扼要综述。     

低压离子色谱法测定土壤中速效钾

通常对土壤中速效钾的测定方法所用仪器昂贵。而低压离子色谱分析仪结构简单,操作简便,速度快,灵敏度高,价格低[1]。本文通过试验,确立了低压离子色谱法测定土壤速效钾的最佳条件,对实际样品的测定结果与推荐值呈显著相关性。1　实验部分土壤经风干、研磨,过100目土壤筛,测定其水份系数[2],贮存于密闭玻璃瓶内备用。准确称取2 0000g土样于50ml烧杯内,加20ml提取剂(0 05mol/LHCl+0 0125mol/LH2SO4),摇匀,25℃提取25分钟,离心分离。连接色谱仪、记录仪、蠕动泵(图1)。自制2J 3低压离子色谱仪,量程10×10μs,蠕动泵流速10刻度,记录仪量…     

THE THEORETICAL STUDY OF ADSORPTION OF METAL IONS ON CHITOSAN

1. INTRODUCTION Chitin, the most abundant natural amino polysaccharide and estimated to be produced annually almost as much as cellulose, is well known to consist of 2-acetamido-2-deoxy-β-D- glucose through α, β(1→4) linkage. Chitin is the major source of surface pollution in coastalareas. Chitosan is the N-deacetylated derivative of chitin and their structures are shown in Fig. 1. Fig. 1 Structures of Chitin and Chitosan Because of the excellent properties such as biocompatibility…     

Heat conduction, convection and radiolysis of the

Formulae for calculating the analytic gradients of the exchange-repulsion energy in the general effective fragment potential (EFP2) method are derived and implemented using a direct differentiation approach. The timings for the exchange repulsion gradient evaluations are approximately three times longer than the energy evaluations, orders of magnitude faster than a previous implementation. Since the direct differentiation approach is not approximate, the gradients can be used with confidence in molecular dynamics and Monte Carlo simulations with the EFP2 method.     

Gradients of the Exchange-repulsion Energy in the General Effective Fragment Potential Method

Formulae for calculating the analytic gradients of the exchange-repulsion energy in the general effective fragment potential (EFP2) method are derived and implemented using a direct differentiation approach. The timings for the exchange repulsion gradient evaluations are approximately three times longer than the energy evaluations, orders of magnitude faster than a previous implementation. Since the direct differentiation approach is not approximate, the gradients can be used with confidence in molecular dynamics and Monte Carlo simulations with the EFP2 method.     

Electric conductivity in a fibrous porous medium with thin but polarized double layers

The electric conduction in the fibrous medium constructed by a homogeneous array of parallel, identical, charged, circular cylinders having an arbitrary zeta potential filled with the solution of a symmetrically charged electrolyte is analytically examined. The thickness of the electric double layers surrounding the dielectric cylinders is assumed to be small relative to the radius of each cylinder and to the gap width between two neighboring cylinders, but the polarization of the mobile ions in the diffuse layers is allowed. The effect of interactions among individual cylinders is taken into explicit account by employing a unit cell model. The appropriate equations of conservation of electrochemical potential energies of ionic species are solved for each cell, in which a cylinder is envisaged to be surrounded by a coaxial cylindrical shell of the fluid solution. Analytical expressions for the effective electric conductivity are obtained in closed forms as functions of the porosity of the fiber matrix and other characteristics of the porous system. Comparisons of the results of the cell model with different conditions at the outer boundary of the cell are made. Under an otherwise identical condition, the electric conductivity in a porous medium composed of an array of parallel cylinders in the transverse direction is smaller than that of a suspension of spheres. The effect of interactions among the cylinders or spheres on the effective conductivity can be quite significant under appropriate conditions.     

Heat conduction effects during the calorimetric determination of absorbed dose to water in radiotherapy beams

A transportable water calorimeter for the determination of the quantity of absorbed dose to water in radiotherapy beams has been developed at the PTB and is presented in detail in this investigation. Heat conduction effects occurring in the calorimeter are studied for different lateral sizes of high-energy photon beams, for different depth dose distributions of electron beams and for a scanned-beam irradiation with a heavy ion beam. The corresponding correction factors are calculated and arguments are given under which conditions these can adequately be applied.     

Field evaluations of the VDmax approach for substantiation of a 25 kGy sterilization dose and its application to other preselected doses

The International and European standards for radiation sterilization require evidence of the effectiveness of a minimum sterilization dose of 25 kGy but do not provide detailed guidance on how this evidence can be generated. An approach, designated VD_max, has recently been described and computer evaluated to provide safe and unambiguous substantiation of a 25 kGy sterilization dose. The approach has been further developed into a practical method, which has been subjected to field evaluations at three manufacturing facilities which produce different types of medical devices. The three facilities each used a different overall evaluation strategy: Facility A used VD_max for quarterly dose audits; Facility B compared VD_max and Method 1 in side-by-side parallel experiments; and Facility C, a new facility at start-up, used VD_max for initial substantiation of 25 kGy and subsequent quarterly dose audits. A common element at all three facilities was the use of 10 product units for irradiation in the verification dose experiment.

The field evaluations of the VD_max method were successful at all three facilities; they included many different types of medical devices/product families with a wide range of average bioburden and sample item portion values used in the verification dose experiments. Overall, around 500 verification dose experiments were performed and no failures were observed. In the side-by-side parallel experiments, the outcomes of the VD_max experiments were consistent with the outcomes observed with Method 1.

The VD_max approach has been extended to sterilization doses >25 and <25 kGy; verification doses have been derived for sterilization doses of 15, 20, 30, and 35 kGy. Widespread application of the VD_max method for doses other than 25 kGy must await controlled field evaluations and the development of appropriate specifications/standards.     

三氮宾分子的磁性设计

采用量子化学ＧＡＵＳＳＩＡＮ９４ａｂｉｎｉｔｉｏＵＨＦ方法和ＳＴＯ－３Ｇ基组设计一系列三氮宾分子，讨论分子的几何结构和取代基对其磁性的影响，计算结果表明，这些分子都具有铁磁性并有高自旋基态，有效交换积分值随代基的变化而变化，其中一种具有较代的总能量和高的有效交换积分值的分子，可期望被合成。