The Signal Amplification in Electrochemical Detection of Chloramphenicol Using Sulfonated Polyaniline‐chitosan Composite as Redox Capacitor

In this work, a novel redox capacitor was designed for signal amplification in electrochemical detection. It was fabricated by co‐electrodeposition of a conducting polymer, sulfonated polyaniline (SPAN) and chitosan on a glass carbon electrode, and its function was evaluated for being a localized source to transfer electron between FcCOOH (Fc) and Ru(NH₃)₆Cl₃ in solution via redox cycling. Furthermore, the electrochemical detection of chloramphenicol, a broad‐spectrum antibiotic was performed using the redox capacitor in the presence of Fc. A significant amplification in cathodic current response of chloramphenicol was obtained through a continuous redox‐cycling reaction. The performance of the amplifying signal responded linearly to chloramphenicol in a concentration range of 0.05 to 50.0 μmol L⁻¹ with a low detection limit of 0.01 μmol L⁻¹. The proposed approach exhibited good reproducibility and stability, and could be used for detection of chloramphenicol in eye drops by standard addition method with the recoveries from 96.5 % to 103.0 %.     

In silico analysis of different signal peptides for the secretory production of recombinant human keratinocyte growth factor in Escherichia coli

BackgroundThe recombinant human truncated Keratinocyte growth factor (Palifermin) is the only FDA approved medicine for the treatment of oral mucositis. The Keratinocyte growth factor is a fairly unstable protein due to its high aggregation propensity and therefore its expression as a secretory protein may results in the production of a protein with more stability, higher solubility, better folding, enhanced biological activity, N-terminal authenticity and simplified downstream processing.ObjectiveThe aim of this study was in silico evaluation of 31 different secretory signal peptides to determine the best theoretical candidates for the secretory production of recombinant truncated human KGF in E. coli.MethodsThirty different prokaryotic signal peptides experimentally shown to be capable of recombinant protein secretion in E.coli, along with the native KGF signal peptide were selected for further investigations. The signal peptide sequences were retrieved from the UniProt database. The ability of SPs to act as a secretory leader peptide for rhKGF and the location of cleavage sites were predicted by SignalP 4.1. Physicochemical properties of the signal peptides, which may influence protein secretion, were analyzed by ProtParam and PROSOII. Furthermore, the mRNA secondary structure and Gibbs free energy profile of the selected SPs were analyzed in the fusion state with the rhKGF using Visual Gene Developer package.Results and ConclusionComputational analysis of the physicochemical properties affecting protein secretion identified Sec-B dependent OmpC, Bla, and StaI and SRP dependent TolB signal peptides as the best theoretical candidates for the secretory production of recombinant truncated human KGF in E.coli.     

Accurate determination of extra-column band broadening using peak summation

The present contribution addresses the problem of the accurate determination of the extra-column band-broadening dispersion by applying the method of moments (MOM) on pulse response experiments. The MOM provides the only mathematically rigorous way to determine the variance of a pulse response, but suffers from the fact that the obtained variance values usually depend very strongly and unpredictably on the selected integration boundaries. In the present study, it is investigated whether the MOM cannot be made more accurate by repeating the pulse response experiment a number of times, then add all measured peaks (after retention time alignment) and subsequently perform the integration on this summed peak. Testing this approach for a number of different integration boundary detection methods consistently more accurate results are obtained than when the different repeat response pulses are integrated individually and the variances are averaged afterwards. It was also found that adding five repeats already leads to a significant improvement of the variance estimate, whereas the addition of 10-20 repeats is needed before the variance estimate converges to a steady value.     

Structure and properties of nonclassical polymers

Utilizing an extended Hubbard-type Hamiltonian which incorporates both nearest-neighbour Coulomb repulsion and exchange interactions, we have studied the energy dispersion of the lowest elementary excitation from the ferromagnetically aligned state of quasi one-dimensional alternant hydrocarbon networks. It was found that the main effect of the long range Coulomb interaction may be thought of as a renormalization (screening) of the on-site Hubbard integral. This implies an enhancement of the kinetic exchange term and impairs the stability of the ferromagnetic state towards single spin inversions. However, for physically relevant values of the parameters entering the model Hamiltonian, the collective spin excitation represents a magnon, whose energy band lies above the reference value pertaining to the magnetically saturated configuration.Dedicated to Prof. Dr. Adolf Neckel on the occasion of his 60th birthday     

Comparison of the performance of three ion mobility spectrometers for measurement of biogenic amines

The performance of three different types of ion mobility spectrometer (IMS) devices: GDA2 with a radioactive ion source (Airsense, Germany), UV-IMS with a photo-ionization source (G.A.S. Germany) and VG-Test with a corona discharge source (3QBD, Israel) was studied. The gas-phase ion chemistry in the IMS devices affected the species formed and their measured reduced mobility values. The sensitivity and limit of detection for trimethylamine (TMA), putrescine and cadaverine were compared by continuous monitoring of a stream of air with a given concentration of the analyte and by measurement of headspace vapors of TMA in a sealed vial. Preprocessing of the mobility spectra and the effectiveness of multivariate curve resolution techniques (MCR-LASSO) improved the accuracy of the measurements by correcting baseline effects and adjusting for variations in drift time as well as enhancing the signal to noise ratio and deconvolution of the complex data matrix to their pure components. The limit of detection for measurement of the biogenic amines by the three IMS devices was between 0.1 and 1.2 ppm (for TMA with the VG-Test and GDA, respectively) and between 0.2 and 0.7 ppm for putrescine and cadaverine with all three devices. Considering the uncertainty in the LOD determination there is almost no statistically significant difference between the three devices although they differ in their operating temperature, ionization method, drift tube design and dopant chemistry. This finding may have general implications on the achievable performance of classic IMS devices.     

Morphology-controlled electrochemical sensing amaranth at nanomolar levels using alumina

Different-shaped aluminas were readily prepared via hydrothermal reaction. It was found that the morphology and the electrochemical sensing properties of alumina were heavily dependent on the reaction time. When extending the reaction time from 6 h to 24 h, the obtained alumina samples changed from amorphous bumps to regular microfibers in diameter of 200 nm, as confirmed by scanning electron microscopy. Transmission electron microscopy observation revealed that longer reaction time was beneficial for the formation of porous and uniform fiber-like structures. Electrochemical tests proved that alumina microfibers were more active for the oxidation of amaranth and exhibited much higher enhancement effect, compared with alumina bumps. On the surface of alumina microfibers, the oxidation peak currents of amaranth increased remarkably. The influences of pH value, amount of alumina microfibers, and accumulation time on the signal enhancement of amaranth were discussed. As a result, a novel electrochemical method was developed for the detection of amaranth. The linear range was from 1 to 150 nM, and the detection limit was 0.75 nM after 1-min accumulation. The analytical application in drink samples was investigated, and the results consisted with the values that obtained by high-performance liquid chromatography.     

From a point-like to an arbitrarily shaped sample: A survey of equations for electron paramagnetic resonance signal intensity calculations

A set of original, analytical equations useful for theoretical calculation of the electron paramagnetic resonance (EPR) signal intensity are presented for the multitude of sample shapes, which range from point-like, line-like, planar, rectangular, cubical, circular, cylindrical, spherical to an irregularly shaped sample. The samples can be situated at any available position within the prescribed part of the microwave cavity (a central cylinder of diameter 11 mm and length 23.5 mm, in either a Bruker single TE₁₀₂ or double TE₁₀₄ rectangular cavity, with the modulation coils situated in the left and right side cavity walls, which is connected to a X-band, field-modulated CW Bruker EPR spectrometer). The theoretical computations of EPR signal intensity can be used in the computer simulations in which: (i) the EPR signal intensity profiles are constructed; (ii) the optimal sample positions in the cavity to give a maximum value of signal intensity are found; (iii) the errors associated with sample positioning within the cavity when compared to a second sample of a different size, shape or position are studied.     

Anab initio investigation of Cu2Se and Cu4Se2

Summary Experimentally known copper selenium clusters show extraordinary geometrical features, especially short Cu-Cu distances. We report the first theoretical investigation of Cu₂Se and Cu₄Se₂. Various quantum chemical methods (SCF, MP2, CPF, CCSD, CCSD(T), LDF) are applied to determine the importance of dynamic electron correlation. We find that inclusion of correlation does not essentially change the electronic structure of the clusters but has a strong influence on geometries. To reduce the computational effort we apply effective core potentials (ECPs) in combination with small, but carefully optimized basis sets. The applicability of simple modellings of correlation energies for approximate inclusion of correlation effects in SCF geometry optimizations is tested.     

Signal averaging in gas chromatography

Ensemble or signal averaging, and the use of the technique for the solution of some unique problems with minimum sample handling, have previously been reported. The capability of the technique has been evaluated with microbore gas chromatography for the fast handling of a large number of analyses: ca 20–30 replicate injections are easily attainable in a reasonable analysis time. The implementation of the signal averaging technique with other concentration techniques for improving detection limits is also demonstrated.     

Comparison of the effective core potential and model potential methods in studies of electron correlation energy in molecules: Dihalides and halogen hydrides

Summary The effective core potential and model potential methods were used in post-SCF calculations on HC1, HBr, Cl₂, and Br₂ in order to gain insight into the effect of insufficient representation of inner nodes in the valence orbitals of the approximate methods. The results show that while the correlation energy may be slightly overestimated (by 1–7%), both the electric moment functions and the quantities depending on energy differences are consistently similar for the methods studied and close to the results from all-electron calculations.Dedicated to Prof. Klaus Ruedenberg