微型燃料电池制备及其微通道摩擦性能的研究

阐述了微型燃料电池的制备过程,结合传统燃料电池数学理论和微流体力学,建立了微型质子交换膜燃料电池(μPEMFC)的数学模型,分析了微通道特性(如摩擦系数和水力直径等)对微型燃料电池性能的影响.结果表明:运用Fluent软件对模型进行计算的仿真结果与公开实验数据基本符合,验证了模型正确性;而传统模型的仿真结果小于真实值;当气道的水力直径Dh从348降至100时,电池性能有所上升;而当Dh值降至61.1时,其性能有所下降.     

Study on resistance coefficient in compound channels

This paper presents a further study of the Manning and Darcy-Weisbach resistance coefficients, as they play a significant role in assessing the cross-sectional mean velocity, conveyance capacity and determining the lateral distribution of depth mean velocity and local boundary shear stress in compound channels. The relationships between the local, zonal and overall resistance coefficients, and a wide range of geometries and different roughness between the main channel and the flood plain are established by analyzing a vast amount of experimental data from a British Science and Engineering Research Council Flood Channel Facility (SERC-FCF). And the experimental results also show that the overall Darcy-Weisbach resistance coefficient for a compound channel is the function of Reynolds number, but the function relationship is different from that for a single channel. By comparing and analyzing the conventional methods with the experimental data to predict composite roughness in compound channels, it is found that these methods are not suitable for compound channels. Moreover, the reason why the conventional methods can not assess correctly the conveyance capacity of compound channels is also analyzed in this paper.The project supported by the National Natural Science Foundation of China (50279024), the National Key Basic Research and Development Program of China (973 Program) (2003CB415202) and the Specialized Research Fund for the Doctoral Program of Higher Education (20030610039)The English text was polished by Ron Marshall     

Acoustic Waves in Channels with Porous and Permeable Walls

The propagation of acoustic disturbances in a porous medium crossed by numerous cracks (double porosity medium) is a complex problem that we here simplify by investigating the acoustics of a permeable channel. We consider a fluidfilled channel in two possible geometries, a slit or a cylindric pipe. The channel is surrounded by a porous medium (saturated with the same fluid) and is itself surrounded by an external medium. To simulate the average properties of the cracked rock, the external medium is either nonpermeable (few connections between cracks) or highly permeable (numerous connections). We present analytical and numerical results concerning acoustic disturbances of small amplitude generated in the channel, such as harmonic waves, step disturbanses and pulses.     

Interaction between an edge dislocation and a circular inclusion with an inhomogeneously imperfect interface

This research presents an analytical study of the interaction problem of an edge dislocation with a circular inclusion with a circumferentially inhomogeneously imperfect interface. The interface, which is modeled as a spring (interphase) layer with vanishing thickness, is characterized by that in which there is a displacement jump across the interface in the same direction as the corresponding tractions, and the same degree of imperfection is realized in both the normal and tangential directions. Furthermore, the interface parameter is nonuniform along the interface. In order to arrive at an elementary form solution, we introduce a conformal mapping function. Then the stress field as well as the Peach–Koehler force acting on the edge dislocation can be obtained from the derived complex potentials. Calculations demonstrate that the nonuniform interface parameter has a significant influence on the stress field.     

Deformation and reverse snapping of a circular shallow shell under uniform edge tension

In this paper we study the deformation and stability of a shallow shell under uniform edge tension, both theoretically and experimentally. Von Karman’s plate model is adopted to formulate the equations of motion. For a shell with axisymmetrical initial shape, the equilibrium positions can be classified into axisymmetrical and unsymmetrical solutions. While there may exist both stable and unstable axisymmetrical solutions, all the unsymmetrical solutions are unstable. Since the unsymmetrical solutions will not affect the stability of the axisymmetrical solutions, it is concluded that for quasi-static analysis, there is no need to include unsymmetrical assumed modes in the calculation. If the shell is initially in the unstrained configuration, it will only be flattened smoothly when the edge tension is applied. No snap-through buckling is possible in this case. On the other hand, if the shell is initially in the strained position, it will be snapped back to the stable position on the other side of the base plane when the edge tension reaches a critical value. Experiment is conducted on several free brass shells of different initial heights to verify the theoretical predictions. Generally speaking, for the range of initial height H < 10 the experimental measurements of the deformation and the reverse snapping load agree well with theoretical predictions.     

Edge waves in asymmetrically laminated plates

We study edge waves propagating along the edge of an asymmetrically laminated elastic plate for which the out-of-plane component of displacement is coupled with the in-plane components. A Stroh-like formulation is used to show that such a plate can support at most two edge waves. An efficient method for computing the edge-wave speeds is proposed and explained through examples.     

Foam Self-Clarification Phenomenon: An Experimental Investigation

This paper is focused on the capabilities of gas–liquid foams to attenuate acoustic waves. It is postulated that the sound attenuation phenomenon in foams is largely governed by the hydrodynamic resistance of the Plateau-Gibbs channels (PGC) to the flow of liquid through them. It is shown that the addition of solid particles to gas–liquid foams has opposite effects depending on the concentration of the added solid particles. As long as the concentration of the added solid particles is smaller than a certain critical value the sound attenuation coefficient increases and as a result in the sound velocity decreases. However, if the concentration of the added solid particles becomes larger than this critical value the attenuation coefficient decreases and the sound velocity increases. When the concentration of the solid particles reaches some critical value, the particles block the Plateau-Gibbs channels and stop the filtration. As a result the attenuation coefficient of the sound wave decreases while the sound velocity, in such three-phase foams, increases. The point at which the sound wave stops attenuating and its velocity starts to increase is known as the point of self-clarification. Based on this postulate and on the results of our preliminary tests the present study provides a plausible explanation to the above-mentioned contradicting effect, and the self- clarification phenomenon.     

Mechanics of rubber shear springs

FEA calculations have been carried out for a model rubber shear spring, consisting of a block of a highly elastic material, bonded between two rigid parallel plates and sheared by displacing one of the plates parallel to the other in its own plane. The block was prevented from deforming in the perpendicular direction, and thus was deformed in plane strain. Stress distributions along the bond-line and the center-line are reported and compared with those expected from the theory of large elastic deformations. Unexpected tensile stresses were found to develop in the interior of the sheared block. They are attributed to the absence on the end surfaces of the stresses needed to maintain a simple shear, causing a pronounced change in the reference pressure—a consequence that is usually overlooked. Because the internal stresses are governed by the boundary conditions, they were strongly affected by the shape of the end surfaces. In addition, they were reduced markedly by assigning values to Poisson's ratio slightly lower than 0.5, thus allowing some volume expansion of the rubber. Strain energy release rates were also evaluated for growth of a crack along the bond-line, starting at the edges, and compared with those reported previously by Lindley and Teo [Energy for crack growth at the bonds of rubber springs, Plast. Rubber Mat. Appl. 4 (1979) 29-37], Muhr et al. [A fracture mechanics study of natural rubber-to-metal bond failure, J. Adhes. Sci. Technol. 10 (1996) 593-616], Gregory and Muhr [Stiffness and fracture analysis of bonded rubber blocks in simple shear, in: D. Boast, V.A. Coveny (Eds.), Finite Element Analysis of Elastomers, Professional Engineering Publications, Bury St. Edmunds, UK, 1999, pp. 265-274] and Gough and Muhr [Initiation of failure of rubber close to bondlines, in: Proceedings of the International Rubber Conference, Maastricht, Netherlands, June 2005, IOM Communications Ltd., London, 2005, pp. 165-174]. They confirm that a long crack at the compression edge will grow faster than one at the tension edge, but the results for short cracks were inconclusive.     

Flow boiling heat transfer and pressure drop of R-134a in a mini tube: an experimental investigation

This paper presents the results of an experimental study carried out with R-134a during flow boiling in a horizontal tube of 2.6 mm ID. The experimental tests included (i) heat fluxes in the range from 10 to 100 kW/m², (ii) the refrigerant mass velocities set to the discrete values in the range of 240-930 kg/(m² s) and (iii) saturation temperature of 12 and 22 °C. The study analyzed the heat transfer, through the local heat transfer coefficient along of flow, and pressure drop, under the variation of these different parameters. It was possible to observe the significant influence of heat flux in the heat transfer coefficient and mass velocity in the pressure drop, besides the effects of saturation temperature. In the low quality region, it was possible to observe a significant influence of heat flux on the heat transfer coefficient. In the high vapor quality region, for high mass velocities, this influence tended to vanish, and the coefficient decreased. The influence of mass velocity in the heat transfer coefficient was detected in most tests for a threshold value of vapor quality, which was higher as the heat flux increased. For higher heat flux the heat transfer coefficient was nearly independent of mass velocity. The frictional pressure drop increased with the increase in vapor quality and mass velocity. Predictive models for heat transfer coefficient in mini channels were evaluated and the calculated coefficient agreed well with measured data within a range 35% for saturation temperature of 22 °C. These results extend the ranges of heat fluxes and mass velocities beyond values available in literature, and add a substantial contribution to the comprehension of boiling heat transfer phenomena inside mini channels.     

Characterizations of competition multigraphs

The notion of a competition multigraph was introduced by C. A. Anderson, K. F. Jones, J. R. Lundgren, and T. A. McKee [C. A. Anderson, K. F. Jones, J. R. Lundgren, and T. A. McKee: Competition multigraphs and the multicompetition number, Ars Combinatoria 29B (1990) 185-192] as a generalization of the competition graphs of digraphs.In this note, we give a characterization of competition multigraphs of arbitrary digraphs and a characterization of competition multigraphs of loopless digraphs. Moreover, we characterize multigraphs whose multicompetition numbers are at most m, where m is a given nonnegative integer and give characterizations of competition multihypergraphs.