基于电磁拓扑的多腔体屏蔽效能快速算法

提出基于电磁拓扑理论计算开孔多腔体屏蔽效能的快速方法.首先给出双腔体等效电路和电磁拓扑信号流图,并推导孔缝节点处的散射矩阵,给出拓扑网络的散射矩阵方程和传输矩阵方程,获得双腔体的广义Baum-Liu-Tesche(BLT)方程.在此基础上研究了开孔三腔体,包括串型级联三腔体和串并型混合级联三腔体的广义BLT方程.对于串型级联三腔体,其电磁拓扑网络和广义BLT方程在双腔体基础上直接扩展即可获得.而对于串并型混合级联三腔体,通过将位于三腔体公共面上的孔缝等效为三端口网络节点,并根据三端口网络散射参数定义推导获得该节点的散射矩阵,最终得到串并型混合级联三腔体的广义BLT方程.本文方法对双腔体的计算结果与文献结果和实验结果相符合,对3组不同类型和尺寸开孔腔的屏蔽效能的计算结果与时域有限差分法计算结果符合较好.该算法不仅效率高,通过对所有计算结果和实验结果的误差统计分析,表明该算法具有较高的计算准确度.     

EMI shielding and dynamic mechanical analysis of graphene oxide-carbon nanotube-acrylonitrile butadiene styrene hybrid composites

Carbon nanomaterials such as carbon nanotubes (CNTs), graphene and their hybrid have been studied extensively. Despite having excellent properties of CNTs and graphene have not yet been fully realized in the polymer composites. During fabrication agglomeration of CNTs and restacking of graphene is a serious concern that results in the degradation of properties of nanomaterials into the final composites. To improve the dispersion of CNTs and restacking graphene, in the present research work, we focused on the hybridization of graphene oxide and CNTs. Multiwalled carbon nanotubes (MWCNTs), functionalized carbon nanotubes (FCNTs), and graphene oxide-carbon nanotubes (GCNTs) reinforced acrylonitrile butadiene styrene (ABS) composites were prepared separately by vacuum filtration followed by hot compression molding. Further, dynamic mechanical analysis (DMA), and electromagnetic interference (EMI) shielding properties of ABS composites reinforced carbon nanofillers were investigated. The dynamic mechanical properties of polymers strongly depend on the adhesion of fillers and polymer, entanglement density of polymer chains in the presence of carbon fillers. The dynamic mechanical characteristics such as storage, loss modulus, and damping factor of prepared composites were significantly affected by the incorporation of MWCNTs, FCNTs, and GCNTs. Maximum EMI shielding effectiveness of −49.6 dB was achieved for GCNT-ABS composites which were highest compared to MWCNTs-ABS composites (−38.6 dB) and FCNTs-ABS composites (−36.7 dB) in the Ku band (12.4–18 GHz). These results depict the great potential of GCNTs-ABS composites to be used in various applications of efficient heat dissipative EMI shielding materials for electronic devices.     

激光陀螺磁灵敏度特性研究

分析、计算了激光陀螺的磁灵敏度特性,并进行了磁灵敏度试验.试验结果及分析表明：在腔体加工准确度不变的情况下,采用合理的设计可以大大降低激光陀螺在某些方向上的磁灵敏度,同时磁试验结果对于设计激光陀螺的磁屏蔽结构具有一定的实用价值.     

Direct computation of second-order SCF properties of large molecules on workstation computers with an application to large carbon clusters

Summary The ab initio SCF computation of second-order properties of large molecules (with 50 atoms or more) on workstation computers is demonstrated for static dipole polarizabilities and nuclear magneting shieldings. The magnetic shieldings are calculated on the basis of gauge including atomic orbitals (GIAO). Algorithmic advances (semi-direct algorithms with efficient integral pre-screening, and use of a quadratically convergent functional for the polarizabilities) are presented together with an illustrative application to the fullerenes C₆₀ and C₇₀.     

Normal halogen dependence of 13C NMR chemical shifts of halogenomethanes revisited at the four‐component relativistic level

The ‘Normal Halogen Dependence’ of ¹³C NMR chemical shifts in the series of halogenomethanes is revisited at the four‐component relativistic level. Calculations of ¹³C NMR chemical shifts of 70 halogenomethanes have been carried out at the density functional theory (DFT) and MP2 levels with taking into account relativistic effects using the four‐component relativistic theory of Dirac‐Coulomb within the different computational methods (4RPA, 4OPW91) and hybrid computational schemes (MP2 + 4RPA, MP2 + 4OPW91). The most efficient computational protocols are derived for practical purposes. Relativistic shielding effect reaches as much as several hundreds of ppm for heavy halogenomethanes, and to account for this effect in comparison with experiment at the qualitative level, relativistic Dyall's basis sets of triple‐zeta quality or higher are to be used within the framework of the four‐component relativistic theory taking into account solvent effects. Relativistic geometrical optimization (as compared with the non‐relativistic level) is essential for the molecules containing at least two iodines at one carbon atom. Copyright © 2016 John Wiley & Sons, Ltd.     

Li-defect interactions in electron-irradiated n-type silicon by EPR measurements

Single crystal silicon, both with and without oxygen, has been diffused with lithium to concentrations ～10¹⁷/cm², irradiated with 1 to 1.5 MeV electrons, and the ensuing defects studies by EPR measurements. The presence of oxygen strongly affects the properties of these defects. Measurements have indicated the presence of two new defects which involve Li-one in O-containing material and one in O-free material. The defects are observed in their electron-filled state, and indicate a net electron spinof ½. The defect spectra disappear (with time) at room temperature, and can be explained by the formation of other Li-involved defects which lie deeper in the energy bandgap and are not visible by EPR. Electron irradiation at 40 °K followed by annealing at higher temperatures show that both EPR defects described above begin to form at about 200 °K and begin to decrease at about 275 °K-just as does the 250 °K reverse annealing observed generally for n-type Si. Based on these data, and the work of others, it is suggested that both defects form as a result of the motion of Si interstitials which produce a (Li-O-interstitial) complex in O-containing Si, and a (Li-interstitial) complex in O-free Si.     

Triple quantum MQMAS spectroscopy of (I=7/2) in Na3Co(NO2)6 and trans-Co[(en2)(NO2)2]NO3 interplay between the quadrupole coupling and anisotropic shielding tensors

The purpose of this paper is to investigate the interplay between the chemical shielding anisotropy and quadrupole interaction in MQMAS spectra. in the compounds Na₃Co(NO₂)₆ and trans-Co[(en₂)(NO₂)₂]NO₃ provides model systems for such an investigation. Furthermore, only few results have been reported on the application of the MQMAS method to a spin I=7/2. The possibilities of the MQMAS spectroscopy for determining the relative orientation of the two tensors and its advantage over previous techniques are discussed. Reported experimental spectra at different spinning speeds of Na₃Co(NO₂)₆ are accurately reproduced by our theoretical simulations. The calculations are based on a recent approach, summarized in the present paper, which allows one to perform efficient simulations of MQMAS spectra including all interactions and their time-dependence throughout the experiment. This is necessary for calculating accurate MQMAS spectra including the spinning sideband pattern. In the case of trans-Co[(en₂)(NO₂)₂]NO₃ where the quadrupolar interaction and chemical shielding are stronger and their axes are non-coincident, the MQMAS spectrum is strongly distorted due to the unsufficient spinning speed and RF power. In this case, MAS at different spinning speeds is shown to provide valuable information.     

Multiple-magnetic field 139La NMR and density functional theory investigation of the solid lanthanum(III) halides

Results from a solid-state ¹³⁹La NMR spectroscopic investigation of the anhydrous lanthanum(III) halides (LaX₃; X=F, Cl, Br, I) at applied magnetic fields of 7.0, 9.4, 11.7, 14.1, and 17.6 T are presented and highlight the advantages of working at high applied magnetic field strengths. The ¹³⁹La quadrupolar coupling constants are found to range from 15.55 to 24.0 MHz for LaCl₃ and LaI₃, respectively. The lanthanum isotropic chemical shifts exhibit an inverse halogen dependence with values ranging from −135 ppm for LaF₃ to 700 ppm for LaI₃, which represents nearly half of the total lanthanum chemical shift range. The spans of the magnetic shielding tensors also vary widely, from 35 to 650 ppm for the solid LaF₃ through LaI₃. DFT calculations of the ¹³⁹La electric field gradient and magnetic shielding tensors have been performed and provide a qualitative interpretation of the trends observed experimentally.     

An investigation into EMI-induced noise in nanometer multi-quantum well InGaN LEDs

This study investigates the low-frequency noise induced by electromagnetic radiation interference (EMI) in a nanometer multi-quantum well InGaN LED (NMQLED). Theoretical models of the noise spectra and the EMI are constructed. In general, a good agreement is identified between the experimental and theoretical results. Both sets of results reveal that the magnitude of the EMI-induced noise is related to the pulse height, the output load, the parasitic capacitance, the interference frequency and the interference amplitude. It is shown that the harmonic noise increases with an increasing interference amplitude and frequency. The techniques presented in this study provide a systematic approach for obtaining the interference noise and signal-to-noise ratio (SNR) in LEDs and similar wavelength-based semiconductor devices.     

13C shielding scale for MAS NMR spectroscopy

We have performed the direct measurements of ¹³C magnetic shielding for pure liquid TMS, solution of 1% TMS in CDCl₃ and solid fullerene. The measurements were carried out in spherical ampoules exploring the relation between the resonance frequencies, shielding constants and magnetic moments of ¹³C and ³He nuclei. Next the ¹³C shielding constants of glycine, hexamethylbenzene and adamantane were established on the basis of appropriate chemical shifts measured in the solid state. All the new results are free from susceptibility effects and can be recommended as the reference standards of ¹³C shielding scale in the magic angle spinning NMR experiments. Copyright © 2011 John Wiley & Sons, Ltd.