离子源辅助电子枪蒸发制备Ge1-xCx薄膜

应用电子枪蒸发纯Ge,考夫曼离子源辅助的方法在Ge基底上沉积了Ge1－xCx薄膜.制备过程中,Ge作为蒸发材料,CH4作为反应气体.通过改变CH4/(CH4+Ar)的气体流量比（G）,制备了G从40％到85％的Ge1－xCx薄膜.应用X射线衍射仪（XRD）测量了Ge1－xCx薄膜的晶体结构,使用傅里叶红外光谱仪（FTIR）测量了2～22 μm的光学透过率,X射线光电子能谱测试（XPS）计算得到C的含量随G的变化关系,用纳米压痕硬度测试计测量了Ge1－xCx薄膜的硬度,原子力显微镜（AFM）测量了G为60％,85％时Ge1－xCx薄膜的表面粗糙度.测试结果表明：制备的Ge1－xCx薄膜在不同的G值下均为无定形结构.折射率随着G值的增加而减小,在3.14～3.89之间可变,并具有良好的均匀性以及极高的硬度.     

Proton and alpha evaporation spectra in low energy 12C and 16O induced reactions

Proton and alpha particle spectra have been measured in the ¹²C+⁹³Nb and ¹²C+⁵⁸Ni reactions at E(¹²C)=40 and 50 MeV and in the ¹⁶O + ⁹³Nb reaction at E(¹⁶O) =75 MeV. The spectra are compared with the statistical model calculations. The shapes of the calculated spectra are in agreement with experimental data except for the alpha spectrum in the ¹²C + ⁹³Nb reaction at 40 MeV. The observed evaporation bump is at ∼2 MeV lower energy compared to the calculated one. This discrepancy could imply alpha particle emission from a deformed configuration before compound nucleus formation at this near Coulomb barrier beam energy.     

用于测量熔合反应的静电偏转板介绍

An electrostatic deflector for separating the fusion evaporation residues from the beam-like products in heavy ion reactions was installed. The evaporation residue separation and identification with the electrostatic deflector setup was tested with the reaction ^32S＋^96Zr at several energies. The fusion evaporation residues and the beam-like particles were well separated after the electrical separation and the experimental fusion cross section obtained from the angular distribution is in good agreement with the calculated value well above the Coulomb barrier. This confirms the reliability of the setup.     

毛细管内薄液膜轮廓和传热特性研究

本文认为毛细管的相变传热机理为液膜的导热和表面蒸发;表面蒸发受蒸汽温度、汽液界面的温度以及汽液压力差的共同控制。汽液流动机理为流动受脱离压力梯度、毛细力梯度支配。汽液相互作用机理为存在由于蒸发导致的动量转移切应力和由于汽液流速不同产生的摩擦切应力。提出的物理模型中较为全面地考虑了毛细管内传热、汽液流动及其相互作用。对毛细管半径和传热功率对薄液膜轮廓和传热特性影响程度的计算结果表明,随着毛细管半径的减小、传热功率的增大,蒸发界面区的长度会有所减小,这是针对微小空间得出的不同于常规情况的结论。     

Unitarity and Page Curve for Evaporation of 2D AdS Black Holes

We explore the Hawking evaporation of two-dimensional anti-de Sitter (AdS2), dilatonic black hole coupled with conformal matter, and derive the Page curve for the entanglement entropy of radiation. We first work in a semiclassical approximation with backreaction. We show that the end-point of the evaporation process is AdS2 with a vanishing dilaton, i.e., a regular, singularity-free, zero-entropy state. We explicitly compute the entanglement entropies of the black hole and the radiation as functions of the horizon radius, using the conformal field theory (CFT) dual to AdS2 gravity. We use a simplified toy model, in which evaporation is described by the forming and growing of a negative mass configuration in the positive-mass black hole interior. This is similar to the “islands” proposal, recently put forward to explain the Page curve for evaporating black holes. The resulting Page curve for AdS2 black holes is in agreement with unitary evolution. The entanglement entropy of the radiation initially grows, closely following a thermal behavior, reaches a maximum at half-way of the evaporation process, and then goes down to zero, following the Bekenstein–Hawking entropy of the black hole. Consistency of our simplified model requires a non-trivial identification of the central charge of the CFT describing AdS2 gravity with the number of species of fields describing Hawking radiation.     

Processing parameters and transport properties of vacuum evaporated CdSe thin films

Semiconducting thin films of cadmium selenide have been grown by conventional thermal evaporation technique on glass substrate. Films evaporated at substrate temperature equal 523 K are stoichiometric and homogeneous. Effect of various growth parameters like rate of deposition and substrate temperature on the electrical properties has been studied in details. Also, the annealed at 673 K under vacuum for 1 h films have been analyzed for resistivity and Hall effect.     

254 nm低通滤光片的研制

根据紫外光学系统的设计要求,在K9基底上研制了254 nm高反射率、可见光谱区高透过率的低通滤光片.根据膜系设计理论,通过针法优化,获得了干涉型低通滤光片的膜系;对电子束蒸镀HfO_2和MgF_2材料进行了研究,解决了材料喷溅的问题,减少了薄膜的吸收;采用考夫曼离子源,通过优化工艺参数,提高膜层致密性,解决了光谱曲线漂移的问题,改善了成膜质量.     

Morphology and Growth Process of Bat-like ZnO Crystals by Thermal Evaporation

A novel bat-like ZnO nanostructure was synthesized on the silicon substrate by simple ther-mal evaporation of zinc powders without any catalyst. Each bat-like nanorod ("nanobat") is composed of a hexagonal head, a continuous neck and a thin handle. High-resolution transmission electron microscopy and selected area electron di raction results reveal the single-crystalline feature and the growing direction along [0001] of the nanobat. The vapor-solid mechanism was found suitable to explain the growth process of the nanobat and a schematic model was proposed in detail based on the experimental results.     

Tuning the morphology of amphiphilic copolymer aggregates by compound emulsifier via emulsion–solvent evaporation

A series of poly(4-vinylpyridine)-b-poly{6-[4-(4-butyloxyphenylazo)phenoxy]hexyl methacrylate} (P4VP-b-PAzoMA) were employed to fabricate aggregates via the emulsion–solvent evaporation method. The emulsion was stabilized by compound emulsifier composed of SDS and span60. By tuning the ratio of two emulsifiers, P4VP-b-PAzoMA could self-assemble into various morphologies including porous microspheres, tremella-like aggregates, bowl-like aggregates and wrinkled microspheres. The transformation of the morphologies could be ascribed to three major aspects: the stability of emulsified chloroform droplets, the permeation of water into chloroform and the dispersity of the interior water droplets with regard to different HLB values. Besides, the morphology could even be tuned by changing the block ratio and the concentration of P4VP-b-PAzoMA, and the HLB dependent morphology changing was also proved within other block ratio or different concentration. The study uncovers a convenient and effective technique to manipulate the morphology of amphiphilic copolymer aggregates.     

Phase‐Transition Induced Conversion into a Photothermal Material: Quasi‐Metallic WO2.9 Nanorods for Solar Water Evaporation and Anticancer Photothermal Therapy

Phase transition from WO₃ to sub‐stoichiometric WO_2.9 by a facile method has varied the typical semiconductor to be quasi‐metallic with a narrowed band gap and a shifted Femi energy to the conduction band, while maintaining a high crystallinity. The resultant WO_2.9 nanorods possess a high total absorption capacity (ca. 90.6 %) over the whole solar spectrum as well as significant photothermal conversion capability, affording a conversion efficiency as high as around 86.9 % and a water evaporation efficiency of about 81 % upon solar light irradiation. Meanwhile, the promising potential of the nanorods for anticancer photothermal therapy have been also demonstrated, with a high photothermal conversion efficiency (ca. 44.9 %) upon single wavelength near‐infrared irradiation and a high tumor inhibition rate (ca. 98.5 %). This study may have opened up a feasible route to produce high‐performance photothermal materials from well‐developed oxides.