A direct quantitative analysis method for monitoring biogenic volatile organic compounds released from leaves of Pelargonium hortorum in situ

A direct quantitative method is presented that is based upon the use of multiple headspace solid phase microextraction (HS-SPME) to monitor biogenic volatile organic compounds (BVOCs) released from a living leaf of Pelargonium hortorum in situ. Seventeen BVOCs were detected by GC-MS after a single SPME extraction using a CAR/DVB/PDMS fibre. An internal standard was employed to determine the absolute amounts of seven terpenoid compounds released from a P. hortorum leaf. The quantitative analysis was performed over two days, with extraction preformed for 20 min every 3 h. The amount of volatiles extracted varied with the time of day, with two maxima recorded at 14:00 (day 1) and 17:00 (day 2), corresponding to 236 and 277 ng of the seven terpenoids recorded, respectively. These results indicate that multiple HS-SPME in combination with an internal standard is a simple, quick, and quantitative technique for analysising BVOC emissions from a live plant sample.     

Reversed micellar solutions in the system sodium octanoate/decanol/water: Model calculations and dynamic light scattering measurements

Geometrical calculations of aggregate sizes in the reversed micellar solution phase of the system water/sodium octanoate/decanol at 20 °C have been tested by dynamic light scattering studies. The autocorrelation functions were interpreted in the simplest possible way (monodisperse aggregates, Stokes-Einstein diffusion equations) since the geometrical model does not account for detailed changes in shapes or micellar interactions. The model predicts the main features of micellization in these solutions, i. e., the micelles grow continuously as the concentration of water or the molar ratio water/octanoate increases, association begins at quite low concentrations of water and the surrounding decanolic solvent behaves as pure decanol which is saturated with water.     

Rheology of polystyrene solutions around the coil overlapping concentration: A phenomenological description of stresses in simple shear flow

Linear viscoelasticity behavior is described with the sum of two terms for polystyrene solutions in tricresyl phosphate around the coil overlapping concentration (K. Osaki, T. Inoue, & T. Uematsu, J Polym Sci Part B: Polym Phys 2001, 39, 211). One is a Rouse–Zimm (RZ) term represented by the Zimm theory with arbitrarily chosen values of the hydrodynamic interaction parameter and the longest relaxation time (τ_RZ). The other (the L term) consists of a relaxation mode with a single relaxation time (τ_L > τ_RZ) and a high‐frequency limiting modulus proportional to the square of the concentration. In this study, we describe the viscosity (η) and first normal stress coefficient (Ψ₁) in steady shear with simple formulas. The stress due to the L term is assumed to be given by a Kaye, Bernstein, Kearsley, and Zapas (K‐BKZ) equation with the damping function h(γ) = (1 + 0.2γ²)^?1/2, where γ is the magnitude of shear. Contributions to η and Ψ₁ from the RZ term are derived from the RZ model, in which the relaxation time in steady flow is given by τ_st = τ + (τ_RZ ? τ)/(1 + 0.35τ_RZ γ˙) instead of τ_RZ. Here, γ˙ is the rate of shear, and τ is the τ_RZ value at the infinite dilution limit. η and Ψ₁ at various concentrations for two polystyrene samples (with molecular weights of 2890 and 8420 kg mol^?1) are well described with parameters derived from dynamic viscoelasticity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1038–1045, 2002     

涤纶织物热定型后动态力学行为

利用Rhcovibron DDV-II-EA型动态粘弹谱仪测试了PET平纹布在不同温度热定型后的布样及其经、纬纱的动态力学性质。发现布及其纱的动态力学-温度谱与原纤维的截然不同。在[Ε]-T 曲线上出现[Ε]峰,[Ε]_max值随织物热定型温度的增高呈指数下降,峰位向高温移动。同时在Ε’’-T曲线上出现双损耗模量峰,相应的松弛转变活化能相差半个数量级。初步分析认为,与织布过程及随后的织物热定型有关。     

Momentum transfer in an agitated vessel with off-centred impellers

Momentum transfer was investigated in an unbaffled agitated vessel of inner diameter 0.3 m equipped with different off-centred impellers. The distribution of the shear rate on the tank wall as a function of the impeller type and Reynolds number was studied in the turbulent regime of the Newtonian liquid flow. The dependences of the averaged dimensionless shear rate, friction coefficient, and dissipated energy on the Reynolds number and eccentricity ratio were approximated using four-parameter equations. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

考虑壁面滑移的Z-W流变模型及其应用

总结了聚合物熔体在剪切溶场壁面滑移研究的成果，提出了Z－W模型的物理概念。该模型考虑了界面分子链和固体壁面间解吸－吸附而发生的滑移。界面分子链和内部分子链间解缠－重新缠结而发生的表观滑移以及变形摩擦滑移。在稳态简单剪切流运过程，模型可以化简为应力和应变的二次微分方程，说明了壁面滑移来源于Cohesive滑移和Adhesive滑移两部分，对于自激振荡相关的多重内振荡和多重外振荡进行了归纳，应用统一模型定性地解释了毛细管实验中剪切应力的非线性，瞬态自激振荡、滑－粘转换和鲨鱼皮等现象，在聚合物熔体振动剪切流动（LAOS）中，统一模型可以简化为杜芬方程，通过模拟发现，该模型可解释小应变振幅下振动剪切时的线性流变行为和在大振幅振动流动中的复杂非线性行为。非线性行为与熔体粘弹性以及近壁面界面层的性质有关，统一模型在特殊情况下还可以简化Joshi模型，结构网络模型，Hatzikiriakos或等效的Graham模型，可见，Z－W模型内内涵比较丰富，适用面较广，也从一个侧面说明该模型具有相当的合理性。     

Kinetic Determination of Microquantities of Rutin by Perturbation of the Bray-Liebhafsky Oscillatory Reaction in an Open System

A kinetic method is described for the microquantitative (microconcentration/microvolume) determination of rutin based on potentiometric monitoring of the concentration perturbations of the Bray-Liebhafsky (BL) oscillatory reaction being in a non-equilibrium stationary state close to a bifurcation point. The experiments are carried out in an open reactor. The response of the matrix system to perturbations by different concentrations of rutin ethanolic solutions is followed by a Pt-electrode. In the concentration range between 7.8×10^–8moldm^–3 and 9.1×10^–6mol dm^–3, we found a linear dependence of the maximal potential shift, E_m, on the logarithm of the rutin concentrations. The unknown concentrations can be determined from the calibration curve up to an accuracy of ±5%. The detection limit is 3.6×10^–8mol dm^–3. The amount of required sample can be as small as 10µL.     

D072型树脂脱除过氧化氢中金属阳离子的工艺研究

实验考察D072型阳离子交换树脂在交换柱中脱除过氧化氢中微量金属阳离子的动态行为．通过改变料液流速、高径比、料液中交换离子浓度及料液组成等参数，绘制不同条件下的透过曲线，以此考察D072型树脂对过氧化氢中金属阳离子的动态交换性能，从而确定适宜的工艺条件，为工业化生产提供科学依据．     

Preparation, structure, and dynamics of a nickel π-allyl cyanide complex

The complex (dippe)Ni(η³-allyl)(CN) has been prepared and fully characterized (dippe=bis-(diisopropylphosphino)ethane), including X-ray diffraction studies, as a square pyramidal structure. The complex shows dynamic ¹H-NMR behavior consistent with substantial structural rearrangements upon π to σ allyl interconversion. A comparison is made with (dippe)Ni(η³-allyl)Br, which also displays a square pyramidal structure.     

POPOP诱导环糊精形成纳米管的研究

用紫外吸收光谱、稳态荧光、荧光各向异性和动态光散射等方法研究了2,2′-p-亚苯基-双(5-苯基噁唑) (POPOP)分子与环糊精(CD)的相互作用. 结果表明, POPOP分子在浓度较低时与β-CD形成1:2的包合物, 在浓度较高时可以进一步诱导β-CD形成纳米管结构. 同时发现, POPOP分子也可以诱导γ-CD形成纳米管结构. 对比于β-CD, POPOP分子在γ-CD水溶液中的荧光发射峰, 不仅有明显的红移而且也缺失了精细结构, 呈现较宽的大包峰. 这是由于POPOP分子成对进入γ-CD空腔形成了激基缔合物的缘故. pH和温度效应实验进一步表明, POPOP诱导β-CD形成的纳米管在pH大于12和温度高于331 K的环境下不能稳定存在.