Fire retardant synergism between melamine and triphenyl phosphate in poly(butylene terephthalate)

The fire retardant efficiency of melamine (MA) and triphenyl phosphate (TPP) in poly(butylene terephthalate) (PBT) was studied by the limiting oxygen index (LOI) and the UL94 test. On adding 10 wt. % MA and 20 wt. % TPP, LOI increased from 20.9 to 26.6 and the UL94 V-0 rating was achieved. SEM and DSC analyses show that the fire retardants are compatible with PBT and facilitate crystallization of PBT. The occurrence of an interaction between MA + TPP and PBT was elucidated by TGA, dynamic FTIR, and pyrolysis/GC/MS. MA + TPP changes the degradation path of PBT and modifies the compositions of the gas and condensed-phase products.     

Studies on accelerated sulphur vulcanization of natural rubber using 1-phenyl-2, 4-dithiobiuret/tertiary butyl benzothiazole sulphenamide

The use of binary accelerators has gained tremendous importance since it increases the production rate of the article made of that elastomer. The authors have analyzed the performance of a novel binary accelerator system in the sulphur vulcanization of natural rubber (NR). The vulcanizates resulting from the binary accelerated process obtained good mechanical properties, ageing and swelling resistance. Network characterization of the mixes was done using swelling measurements, stress-strain analysis etc. The chain entanglement density was measured using dynamic mechanical analysis. However the performance is found to be dependent on the relative proportion of mono, di and polysulphidic linkages in the material. The result of the study points out that the proposed system can be active in NR regardless of the vulcanization recipe and temperature. The performance of the new binary system in filled vulcanizates is also studied. Based on the processing, mechanical and chemical characterization an optimum concentration is suggested for the new system.     

Dynamic light scattering and cryogenic transmission electron microscopy investigations on metallo-supramolecular aqueous micelles: evidence of secondary aggregation

Metallo-supramolecular diblock copolymers consisting of a polystyrene (PS) block connected to a poly(ethylene oxide) (PEO) block by a bis(terpyridine)ruthenium complex (PS₂₀-[Ru]-PEO _y ) were used to prepare aqueous micelles. The length of the PS block was kept constant, while two PEOs of different molecular weight were used. The resulting hydrated micelles and aggregates were characterized by a combination of cryogenic transmission electron microscopy (cryo-TEM) and dynamic light scattering measurements. The results were compared to those obtained for a covalent counterpart (PS₂₂-b-PEO₇₀). Cryogenic transmission electron microscopy allowed visualization of the PS core of the micelles. Moreover, the aggregates result from clustering of individual micelles.     

A comparison of two algorithms for warping of analytical signals

The alignment of analytical signals is an important preprocessing step when further analysis (e.g. PCA) requires the same lengths of all of them. Two techniques for alignment of profiles, namely dynamic time warping (DTW) and correlation optimized warping (COW) were tested and compared. The attention was focused on chromatographic and spectroscopic profiles. Simulated and two sets of real data were studied in this study.     

Value function and optimality conditions for semilinear control problems

This paper is concerned with optimal control problems of Mayer and Bolza type for systems governed by a semilinear state equationx(t)=Ax(t) + f(t, x(t), u(t)), u(t) U, whereA is the infinitesimal generator of a strongly continuous semigroup in a Banach spaceX. We prove necessary and sufficient conditions for optimality and then use these conditions to investigate properties of the value function related to superdifferentials. Conversely, we use the value function to obtain criteria for optimality and feedback systems.Work (partially) supported by the Research Project Equazioni di evoluzione e applicazioni fisicomatematiche (M.U.R.S.T.-Italy).     

Structure and microporous formation of cellulose/silk fibroin blend membranes: Part II. Effect of post-treatment by alkali

Blend membranes (RCF1) were prepared from mixture solution of cellulose and silk fibroin (SF) in cuoxam by coagulating with acetone–acetic acid (4:1 by volume). The blend membranes were subjected to post-treatment with 10% NaOH aqueous solution, and their structure and properties were characterized by FT-IR, X-ray diffraction, DSC, SEM and DMTA. In previous work, cellulose/SF blend membranes (RCF2) prepared by coagulating with 10% NaOH aqueous solution formed a microporous structure, in which the SF as a pore former was almost completely removed from the membrane. However, when the blend membranes RCF1 were immersed in 10% NaOH aqueous solution for post-treatment, a strong hydrogen bonding between cellulose and SF inhibited the removal of SF. Although alkali is a good solvent for SF, the blend membranes RCF1 such obtained from cellulose and SF were alkali resistant. The crystallinity and the mean pore size of the blend membranes slightly decreased with increasing post-treatment time. This work provided a cellulose/silk blend membrane, which can be used under alkaline medium.     

Application of dodecyldimethyl (2-hydroxy-3-sulfopropyl) ammonium in wall modification for capillary electrophoresis separation of proteins

A zwitterionic surfactant, dodecyldimethyl (2-hydroxy-3-sulfopropyl) ammonium (C12H25N+(CH3)2CH2CHOHCH2SO3-), named dodecyl sulfobetaine (DSB), was used as a novel modifier to coat dynamically capillary walls for capillary electrophoresis separation of basic proteins. The DSB coating suppressed the electroosmotic flow (EOF) in the pH range of 3-12. At high DSB concentration, the EOF was suppressed by more than 8.8 times. The DSB coating also prevented successfully the adsorption of cationic proteins on the capillary wall. Anions, such as Cl-, Br-, I-, SO4(2-), CO3(2-), and ClO4-, could be used as running buffer modifiers to adjust the EOF for better separation of analytes. Using this dynamically coated capillary, a mixture of eight inorganic anions achieved complete separation within 4.2 min with the efficiencies from 24,000 to 1,310,000 plates/m. In the presence of ClO4- as EOF adjustor, the separation of a mixture containing four basic proteins (lysozyme, cytochrome c, alpha-chymotrypsinogen A, and myoglobin) yielded efficiencies of 204,000-896,000 plates/m and recoveries of 88%-98%. Migration time reproducibility of these proteins was less than 0.5% relative standard deviation (RSD) from run to run and less than 3.1% RSD from day to day, showing promising application of this novel modifier in protein separation.     

H and H NMR studies of cyclohexane nanocrystals in controlled pore glasses

The formation and behaviour of cyclohexane and cyclohexane-d₁₂ nanocrystals in mesoporous solids of well-defined dimensional constraints are studied by ¹H and ²H NMR. The NMR line widths, spin–spin relaxation times (T₂), spin–lattice relaxation times (T₁) and diffusivities (D) were measured as a function of temperature, and the results are discussed with reference to the values obtained for the bulk materials. The confined solids exhibit substantial changes in the phase behaviour and molecular dynamics. Thus, the line-shape measurements reveal a two-phase system consisting of a highly mobile component at the surface of the pore and a plastically crystalline phase in the centre of the pore. The liquid-like surface layer in the mesopores is observable well below the reduced transition temperature of the confined cyclohexane. However, the T₂ and diffusion measurements show that the mobile phase also embraces a minor component attributed to non-frozen liquid in pockets or offshoots.     

A multiple coupling approach to produce high-performance SERS substrates

In this work, large area gold-nanoparticle-cluster pillar array with a gold mirror as high-performance SERS substrate was facilely fabricated by combined use of nanosphere lithography and self-assembly approach.     

The Structure of Bis[N‐6‐aminopyridyl‐N‐(1S)‐(+)‐10‐camphorsulfonylamino]palladium in the Solid State and in Solution

The complex, bis[N‐6‐aminopyridyl‐N‐(1S)‐(+)‐10‐camphorsulfonylamino]palladium, Pd[(S)‐APCS]₂, 1 , was prepared by reaction of 2‐[(1S)‐(+)‐10‐camphorsulfonamino]‐6‐aminopyridine with PdCl₂ in THF. Complex 1 has been characterized by spectroscopic methods and its structure has been determined by X‐ray crystallography. Crystal data: space group C2, a= 16.082 (2), b = 17.104 (2), c = 13.051 (2)Å, β = 99.95 (1)°, V = 3535.9 (8) ų, Z = 2 with final residuals R1 = 0.0491 and wR2 = 0.0944. Two independent molecules, (S,S)‐Pd[(S)‐APCS]2, 1a , and (R,R)‐Pd[(S)‐APCS]2, 1b , were found in each asymmetric unit, which exchange to each other via a series of nitrogen inversion and C‐C bond rotation. The inversion energy (ΔGc₁^≠) and the energy barrier (δGc₂^≠) were 11.5 ± 0.1 Kcal mol^?1 at 246 K and 9.8 ± 0.1 Kcal mol^?1 at 199 K, respectively, calculated by dynamic NMR data.