Low-temperature bath/coupled-capillary/sweeping-micellar electrokinetic capillary chromatography for the separation of naphthalene-2,3-dicarboxaldehyde-derivatized dopamine and norepinephrine

The use of a low-temperature (0 degrees C) bath-assisted coupled capillary for the separation of naphthalene-2,3-dicarboxaldehyde (NDA)-derivatized dopamine and norepinephrine using the sweeping-micellar electrokinetic capillary chromatography (MEKC) mode is described. In this technique, a capillary consisting of two portions with different inside diameters is used. Therefore, the field strength inside the capillary is different. Hence, the electrophoretic migration velocities of the analytes and the electro-osmotic flow (EOF) also are different. Furthermore, when a portion of the capillary (wide portion, used for sweeping) is immersed in a low-temperature bath, the viscosity of the buffer and the retention factor of the analytes inside are increased. Thus, not only are the interactions between the SDS micelles and the analytes increased, but the SDS-analytes also move more slowly. As a result, a more complete separation can be achieved, even when the sample injection volume is large, up to approximately 2 microL. In general, when the volume of an injected sample is larger, the effects of sweeping and separation would become insufficient, especially when the retention values (k) of the analytes are quite different. However, this limitation can be improved when the low-temperature bath/coupled capillary/sweeping-MEKC mode is used.     

Vergleich von Probenaufbereitungsverfahren beim quantitativen Nachweis von Schwermetallen in Fruchts?ften mit der flammenlosen Atomabsorptionsspektrometrie

Ohne Zusammenfassung

---

Comparison of sample preparation methods for quantitative determination of heavy metals in fruit juices with flameless atomic absorption spectroscopy

Vortragender     

Vacuum Ultraviolet Photolysis of Polyethylene,Polypropylene, and Polystyrene

Using infrared reflection absorption spectroscopy (IRRAS), quartz crystal microbalance (QMB) measurements, and X-ray photoelectron spectroscopy (XPS) in combination with chemical derivatization techniques the VUV photolysis of polyethylene (PE), polypropylene (PP), and polystyrene (PS) was investigated. A mass balance obtained from the quantification of the data was used to suggest reaction path ways. Although PE and PP behave similar, the mass loss is about 8 times higher in the case of PP. These differences originate from the higher disproportionation to recombination ratio for the branched polymer. Both polymers form double bonds and at extended treatment times they tend to crosslink. PS is rather stable due to the possibility of the energy dissipation by fluorescence.     

Coulometrisches Verfahren zur Bestimmung von Gesamt-, Carbonat- und Nichtcarbonat-Kohlenstoff in magmatischen, metamorphen und sediment?ren Gesteinen

Zusammenfassung Für die Bestimmung von Gesamt-, Carbonat- und Nichtcarbonat-Kohlenstoff in magmatischen, metamorphen und sedimentären Gesteinen (auch bei höheren Anteilen an organischem C) ist ein Verfahren nach dem Prinzip der coulometrischen Titration geeignet. Der Gesamt-Kohlenstoff wird ermittelt durch Erhitzung der auf <0,125 mm zerkleinerten Probe bei etwa 1250°C im Sauerstoffstrom ohne irgendwelche Zusätze. Zur Bestimmung von Nichtcarbonat-Kohlenstoff wird eine bestimmte Menge Gesteinspulver mit Salzsäure versetzt und auf einem Aluminiumblock HCl abgeraucht. Der Carbonat-Kohlenstoff entweicht als CO₂. Zurück bleibt der Nichtcarbonat-Kohlenstoff, welcher wie der Gesamt-Kohlenstoff coulometrisch bestimmt wird. Der Carbonat-Kohlenstoff bzw. die äquivalente Menge CO₂ ergibt sich dann aus der Differenz von Gesamt- zu Nichtcarbonat-Kohlenstoff. Das Verfahren ist anwendbar auf Kohlenstoffgehalte in Gesteinen von etwa 10 ppm bis 20 Gew.-% bei mittleren Standardabweichungen von etwa 0,0002–0,05% C (Richtwerte). Die Analysendauer für eine Probe beträgt etwa 3–5 min.

---

Coulometric method for the determination of total, carbonate, and non-carbonate carbon in igneous, metamorphic, and sedimentary rocks

For the measurement of total carbon the sample, ground finer than 0.125 mm and without the addition of any reagents, is ignited in a current of oxygen at about 1250°C. Non-carbonate carbon can be analysed after another portion of the sample is treated with conc, hydrochloric acid and evaporated on a hot plate; the carbonates are decomposed and the carbonate carbon is removed as carbon dioxide. The residue is non-carbonate carbon which is also determined by the coulometric method. The difference between total carbon and non-carbonate carbon corresponds to carbonate carbon or its equivalent as carbon dioxide. The method is applicable to carbon contents in rocks from 10 ppm to 20 wt.-%. The standard deviation is approximately 0.0002 to 0.05% C. Each carbon analysis takes about 3 to 5 min.

     

Extension of conjugation leading to bathochromic or hypsochromic effects in OPV series

Four OPV series 1-4 (a-d) with a terminal dialkylamino group as electron donor were prepared by Wittig-Horner reactions. To study the influence of the push-pull effect on the long-wavelength absorption, three of the four series contained terminal acceptor groups (CN, CHO, NO(2)). The length of the chromophores strongly affects the intramolecular charge transfer (ICT)-an effect which superimposes upon the extension of the conjugation. Increasing numbers n of repeat units cause an overall bathochromic shift for the purely donor-substituted series 1 a-4 a and the series 1 b-4 b with CN as weak acceptor. The two effects annihilate each other in the series 1 c-4 c with terminal CHO groups, so that the absorption maxima are almost independent of the length of the chromophore. A hypsochromic shift is observed for the series 1 d-4 d, which contains the strong acceptor group NO(2). This anomaly disappears on protonation of the dialkylamino group because the push-pull effect disappears in the ammonium salts. The results can be explained by semiempirical quantum mechanics (AM1, INDO/S). The HOMO-LUMO transition, which is mainly responsible for the ICT, becomes less important in the electron transitions S(0)-->S(1) when the distance between donor and acceptor is increased. The commonly used VB model, which contains an electroneutral and a zwitterionic resonance structure, is contrasted with a MO model with dipole segments at both ends of the OPV chains. The latter model turned out to be more appropriate-at least for donor-acceptor-substituted OPVs with n >/= 2.     

R?ntgenspektrometrische Bestimmung von Eisen-55 in Luftstaub- und Niederschlagsproben

Zusammenfassung Eisen-55 wurde in Neuherberg bei München seit März 1970 in monatlich gesammelten Luftstaubproben und seit Januar 1971 in Monatsniederschlagsproben bestimmt. Nach dem Veraschen der Proben wurde Eisen durch Extraktion' mit Di-iso-propyläther abgetrennt. Zur weiteren Entfernung störender Radionuklide des Fallouts wurde eine Ionenaustauschertrennung angeschlossen. Nach der elektrolytischen Abscheidung des Eisens auf Kupferplättchen wurden die Röntgenspektren mit einem Proportionalzähler sowie einem Si(Li)-Detektor aufgenommen.Die mittlere spezifische Luftaktivität betrug in Neuherberg 1,0 fCi/m³ im Jahr 1970 (ab März), 1,2 fCi/m³ im Jahr 1971 und 0,36 fCi/m³ im Jahr 1972. Die dem Boden durch den Niederschlag zugeführte Aktivität wurde zu 697 pCi/m² · Jahr für 1971 und 178 pCi/m² · Jahr für 1972 bestimmt.Vortrag anläßlich der Tagung Spurenanalyse, 2. bis 5. April 1973 in Erlangen.     

Spectrographic estimation of Ga, In and Tl in semiconductor grade selenium

Summary An emission spectrographic method for the estimation of Ga, In and Tl in semiconductor grade selenium at less than a ppm concentration has been developed. The impurities were separated from 1 g of selenium by volatilizing it from its solution in nitric acid and sulphuric acid. The residue containing the impurities was dissolved in small amounts of 6 M HCl and was loaded along with the washings on 10 mg mixture containing graphite (90%) and sodium chloride carrier (10%) in the electrode crater. The spectra were excited in a d.c. arc carrying 13 A current. The detection limits lie in the range of 0.0025–0.005 ppm. The precision of the method ranges from 7–12% for these elements. The recoveries of impurities from selenium were confirmed using radioactive tracers.

---

Spektrographische Bestimmung von Gallium, Indium und Thallium in Halbleiterselen

Zusammenfassung Eine 1 g-Probe wird in Salpeter- und Schwefelsäure gelöst und die Verunreinigungen durch Verflüchtigung des Selens isoliert. Sie werden in 6 M HCl gelöst und zusammen mit einem Graphit/NaCl-Gemisch (91) in die Elektrode eingebracht. Zur Anregung dient ein Gleichstrombogen (13 A). Die Nachweisgrenzen liegen im Bereich von 0.0025–0.005 ppm, der Variationskoeffizient bei 7–12%. Die Wiedergewinnung der Verunreinigungen wurde mit Hilfe von Radioindicatoren geprüft.

     

Cadmium colloids from non-aqueous solvents

Cadmium colloids have been prepared by Chemical Liquid Deposition (CLD). The metal is evaporated to yield atoms which are solvated at liquid nitrogen temperature, and upon warming, stable liquid colloids are formed with particle size ranging between 25–100 Å. Zeta potentials were calculated according to the conversion of Hunter and the Hückel equation, for ethanol and dimethyl sulphoxide. UV/VIS measurement of most of the black colloids showed absorption band around 280 nm. For comparison, we prepared CdS colloid with size 400–625 Å. The colloids are stable to oxidation in air and/or oxygen bubbling. The synthesis of colloids and films from Cd with acetone, 2-butanone, ethanol, 2-propanol, 2-methoxyethanol, DMF and DMSO is reported. Transmission Electron Microscopy (TEM) allows us to determine particle size.