Q‐switched and modelocked all‐fiber lasers based on advanced acousto‐optic devices

The interest in all‐fiber lasers is stimulated by the inherent advantages they have over bulk lasers in aspects such as heat dissipation and robustness. The performance of Q‐switched and modelocked fiber lasers can benefit enormously from the development of all‐fiber configurations. A fiber laser with strictly all‐fiber components can fulfil the requirements of mechanical stability, low maintenance, enhanced power efficiency, simplified assembly process, and low cost. In this framework, recent developments infiber acousto‐optic devices are reviewed that have demonstrated new possibilities for actively Q‐switched distributed feedback fiber lasers, modelocking lasers and doubly active Q‐switched modelocked lasers. The aim is to demonstrate the great potential of infiber devices for the active control of different types of fiber lasers.     

Diode laser wavelength modulated spectroscopy of I(2) at 675 nm

A free-running diode laser has been used to examine the spectrum of 127I(2) near 675 nm using wavelength modulation spectroscopy. Twelve transitions have been observed in the region between 14818.0 and 14819.3 cm(-1), all of which are accounted for by previously published constants. Changes in quadrupole coupling constants, DeltaeQq, have been determined for all lines. Pressure broadening and shift coefficients have been determined for two unblended lines for broadening by air, argon, and water vapor.     

Analysis of circular bends in planar optical waveguides

Waveguides with circular bends are analyzed by means of a conformal transformation in conjunction with the WKB method of dealing with the nonuniform refractive index that results from the transformation. The result is a prediction of the operational parameters of the bent guide, including the loss. The transformation makes possible an intuitive understanding of the cause of the loss.     

Eye Opening Degradation due to Sideband Suppression in Direct Detection Systems for Different Signaling Formats

Abstract

The intensity distortion resulting from sideband suppression in direct detection systems is investigated analytically and through numerical simulation for unipolar binary and alternate mark inversion formats. A method to calculate the sequence leading to the highest eye opening penalty is proposed, based on the characterization of the distortion originated by the Hilbert transform of an isolated pulse and constructive/destructive addition of the distortions of pulses in different time slots. The application of the proposed method to a practical transmitter is assessed, and accurate results are shown for signals without complete sideband suppression.     

High Flattened Comb Filter with Precise Channel Spacing Based on Linearly Chirped Fiber Bragg Grating and Phase Compensation

Abstract

A novel approach to implement high flattened comb filters with precise channel spacing based on DC phase compensation is proposed. Channel wavelength error and peak reflectivity variation are discussed and calculated. A phase compensation method by simply changing the DC refractive index is proposed. Fiber Bragg gratings with different DC phase shifts are fabricated, which indicates that an arbitrary DC phase shift can be introduced precisely. A high flattened comb filter with precise 50-GHz channel spacing is realized with the help of a micrometer-precision translation stage. Then the peak reflectivity variation with and without phase compensation for different chirp coefficients is researched.     

Allocation Algorithm for Optical OFDM Multimode Fiber Communication System

Abstract

A fast bits allocation algorithm is proposed for adaptively modulated optical orthogonal frequency division multiplexing multimode fiber communication system to decrease the system bit error rate caused by some orthogonal frequency division multiplexing subcarriers being located at the deep nulls in the high-frequency region of multimode fiber. Based on a lookup table scheme, the new algorithm dramatically decreases the computational complexity of the Greedy algorithm. The simulation results show that the new algorithm has the same allocation result as the Greedy algorithm, but the computational complexity is considerably lower. In addition, adaptive bits allocation can effectively reduce the system bit error rate.     

Diode laser spectroscopy of He,N2 and air broadened water vapour transitions belonging to the (2ν1 + ν2 + ν3) overtone band

The line shape parameters of rovibrational transitions of water vapour belonging to the (2ν₁ + ν₂ + ν₃) overtone band due to collisions between absorber molecules and noble gas helium have been measured in the spectral range between 11988.494 cm^?1 and 12218.829 cm^?1 using NIR diode laser spectrometer. In addition nitrogen and air broadening effects on some water vapour transitions belonging to the same band have also been studied. Wavelength modulation spectroscopy along with phase sensitive detection technique are used to record first derivative (1f) signal of buffer gas broadened water vapour transitions. Observed line shapes are fitted to standard Voigt profiles by non-linear least squares fitting program to extract the line shape parameters, like line strength and pressure broadening coefficients. The broadening effects induced by different types of buffer gases on water vapour line shapes are compared. Rotational quantum number (J) dependence of broadening coefficients of water vapour transitions is also examined.     

Influence of modulation formats performance of the combined modulation in WDM-PON system

Different modulation modes of DPSK and OOK are separately employed in the upstream and downstream link, after the comparison with different modulation formats in the downstream including the codes of non return-to-zero (NRZ), return-to-zero (RZ) and inverse return-to-zero (IRZ), the symmetric rate of 10 Gbps with 20 km transmission is realized without the dispersion compensation. It can be shown that in the combined modulation mode with the downstream of IRZ code, higher extinction ratio in the downstream and better performance of dispersion tolerance in the upstream could be achieved, enhancing the overall property of the transmission system.     

Scheme for nonlinear frequency modulated signal cancelling system

A cancelling system for the four nonlinear frequency modulated (NLFM) signal (i.e. Taylor window, Tangent-based, Combination linear frequency modulation (LFM) and tan-FM, Stepped NLFM) is presented. It is mainly composed of a digital radio frequency memory (DRFM) and a field programmable gate array (FPGA) chip etc. The received signals are stored and reproduced by DRFM, and the system delay time is controlled by the FPGA chip. According to the target's radar cross section (RCS), the radar echo cancelling wave will be generated by the FPGA and DRFM on signal processing. The effect of error on the cancelling wave is analysed and the method for reducing nonlinear phase errors is presented. Theoretical analysis and simulation show that the system effectively reduces the signal power received by the radar receiver. Numerical simulation results show that about 11.3 dB target gain reduction can be achieved under the condition of large deviation.     

Structural Properties and Interlayer Interaction in (MX) x TX2-Type Ternary Chalcogenides with Layered Composite Crystal Structure

Abstract

Structural properties and interlayer interaction in mutually incommensurate (MX) _x TX₂-type ternary chalcogenides with layered composite crystal structure have been investigated on the basis of structure analysis including superspace group symmetry. It has been confirmed that charge transfer between substructures occur in (LaS) _x TiS₂ from the results of Ti K XANES spectra. The lattice stability and interlayer interaction in the (MX) _x TX₂ have been discussed with the use of bond-valence-sum (BVS) method by considering modulated structure analysis.