Characterization and estimation of refractive index profile of laser-written photopolymer optical waveguides

In this study, channel waveguides fabricated in photopolymer films by direct-writing using a low-power CW laser, are used as phase objects in a simple plane-wave diffraction setup, and the refractive index modulation profiles of the waveguides are characterized using the recorded diffraction patterns. Index profiles are modeled by piece-wisely combining two Gaussian functions representing the central and the tail regions. Measured diffraction patterns are matched with patterns generated using the model. This simple model makes it possible to design various channel waveguides embedded into polymer substrates. The proposed model is tested on three distinctive waveguide profiles written on the same Acrylamide/Polyvinyl Alcohol based photopolymer with different exposures.     

Cross-gain modulation in closely spaced energy states quantum dash semiconductor optical amplifiers

A detailed small-signal analysis of cross-gain modulation is performed for closely spaced energy state quantum dash (QDsh) semiconductor optical amplifier (SOA). The analysis takes into account the carrier transition in all electron and hole states, the gain dispersion of the active layer, the effect of the energy detuning between the probe and pump signals and the effect of doping on the characteristics of cross-gain wavelength conversion. Our analysis reveals that broadband conversion efficiency can be obtained in QDsh SOA when the energy of the pump signal is at − 20 meV below the ground state. Also we find that large 3 dB bandwidth can be achieved when the energy of the pump and the probe signals is at + 30 meV. Our analysis shows that doping the dashes with P-type concentration can enhance the efficiency and the intrinsic 3 dB bandwidth of cross-gain wavelength conversion.     

Simultaneous measurements of multiple flow velocity components using frequency modulated lasers and a single molecular absorption cell

Since unsteady, complex flow phenomena play an important role, optical measurements techniques are required for flow investigations, which provide simultaneous measurements of multiple velocity components. Doppler global velocimetry has this potential. It is a flow measurement technique, where the Doppler shift of scattered light is measured by a molecular absorption cell for frequency-to-intensity conversion. However, novel Doppler global velocimeters with laser frequency modulation were only used for single component measurements yet. In order to enhance such a system for the simultaneous measurement of multiple components, a concept based on frequency division multiplexing is introduced for the first time. Besides multiple lasers, only a single molecular absorption cell and a single detector unit is required. Two-component measurements of velocity profiles from nozzle flows are presented as a proof of principle. The designed measurement system provides high measurement rates of up to 20 kHz, which is three orders of magnitude higher than for typical Doppler global velocimetry setups.     

Colorless gigabit WDM-PON link using injection locking and electro-absorption transceiver

In this paper, a novel colorless wavelength division multiplexing-passive optical network (WDM-PON) system using injection locking and electro-absorption transceiver (EAT) is proposed and demonstrated experimentally. This system has advantages, high data transmission, small downlink signal effect to uplink signal and less polarization sensitivity, compared to the system using reflective semiconductor optical amplifier (RSOA). Downlink signal modulates the right side carrier of the double side band signal by using injection locking. EAT functions as both photo detector in downlink signal and modulator for uplink signal, simultaneously. A possible cross absorption modulation effect from the EAT is analyzed experimentally. Bidirectional transmission of 1.25 Gbps and 622 Mbps for downlink and uplink, respectively, were verified through 23 km standard single mode fiber (SSMF).     

A cost-effective WDM-PON architecture simultaneously supporting wired, wireless and optical VPN services

It is believed that next-generation passive optical networks (PONs) are required to provide flexible and various services to users in a cost-effective way. To address this issue, for the first time, this paper proposes and demonstrates a novel wavelength-division-multiplexed PON (WDM-PON) architecture to simultaneously support three types of services: 1) wireless access traffic, 2) optical virtual passive network (VPN) communications, and 3) conventional wired services. In the optical line terminal (OLT), we use two cascaded Mach-Zehnder modulators (MZMs) on each wavelength channel to generate an optical carrier, and produce the wireless and the downstream traffic using the orthogonal modulation technique. In each optical network unit (ONU), the obtained optical carrier is modulated by a single MZM to provide the VPN and upstream communications. Consequently, the light sources in the ONUs are saved and the system cost is reduced. The feasibility of our proposal is experimentally and numerically verified.     

Impact of channel baud-rate on logarithmic digital backward propagation in DP-QPSK system with uncompensated transmission links

We numerically investigate the impact of channel baud-rate on the performance of logarithmic step-size based spilt-step Fourier method (SSFM). This algorithm is used to implement digital backward propagation (DBP) to efficiently compensate fiber chromatic dispersion (CD) and non-linearities (NL). The DBP method is implemented in N-channel dual-polarization quadrature phase shift keying (DP-QPSK) transmission over 2000 km standard single mode fiber (SMF) with no in-line optical dispersion compensation. We investigate the same-capacity and same-bandwidth transmission systems with 56 Gbit/s/ch (14 GBaud), 112 Gbit/s/ch (28 GBaud) and 224 Gbit/s/ch (56 GBaud). Each system has the bandwidth occupancy of 500 GHz with a total transmission capacity of 1.12 Tbit/s. Moreover, we have also compared the multiple channel transmission performance with single channel transmission to quantify the impact of inter-channel (cross-phase modulation ‘XPM’ and four-wave mixing ‘FWM’) and intra-channel (self-phase modulation ‘SPM’) non-linearities. The logarithmic step-size based DBP algorithm (L-DBP) depicts efficient mitigation of CD and NL impairments. The benefit of the logarithmic step-size is the reduced complexity and computational time for higher baud-rate transmission systems.     

Erbium doped fiber ring laser for optical wavelength conversion

We experimentally investigate the gain saturation effect of a piece of 8 m long Erbium doped fiber (EDF), we introduce a theoretical model for the EDF ring loop, and our simulation results show very good cross-gain modulation (XGM) and wavelength conversion. We also experimentally investigate the XGM in an EDF ring loop system. Based on the study of the XGM in the EDF ring loop system, a wavelength conversion is designed with the EDF ring loop system. The EDF ring loop systems as a wavelength conversion is experimentally demonstrated by converting a sinusoidal modulated optical signal at wavelength of 1551 nm to an optical signal at wavelength of 1553.3 nm.     

磁旋光反射腔交流调制输出倍频信号特性分析

根据法拉第效应的非互易性原理,分析了磁旋光反射腔交流调制输出倍频信号相关的特性;具体研究了倍频信号幅度及角度检测灵敏度与调制角幅度θ0和反射腔反射率R的关系.研究结果表明:当调制角幅度较小时,输出倍频信号幅度随反射率R的增加而增加,最大值是正交调制法的18倍左右;利用倍频信号检测角度的灵敏度与正交法相比也得到多倍提高,...     

基于新型MRTD模型研究扫描型红外热像仪的视距

 基于人眼视觉系统可感知的阈值信噪比,提出预测红外热像仪最小可分辨温差（MRTD）方法。该方法根据频谱理论和红外热成像系统的二维调制传递函数,并结合匹配滤波器的概念,描述4条带标准靶的空间频谱函数。利用此空间频谱函数研究了4条带标准靶经过红外热成像系统的调制传递之后人眼视觉系统的感知信噪比。基于人眼视觉系统可感知的阈值信噪比,建立一个新的MRTD模型。依据此MRTD模型和视距模型,实现红外热像仪视距的预测。仿真结果表明,该方法预测的视距与实验数据有很好的一致性。     

光模块消光比的补偿方法

提出了一种新型光模块消光比补偿方法。该方法首先根据不同温度下驱动芯片上报电流的大小,结合光功率和消光比的计算公式,模拟出激光器光功率随电流及电压的变化曲线。然后根据要求调整激光器调制电流的大小,以保持消光比的稳定。该补偿方式有效地解决了光器件一致性较差的问题,可以将原来斜效率的指标适当放宽10%,从而提高了利用率和成品率,降低了模块生产成本。