Ar—Kr溶液扩散系数的分子动力学模拟及其与温度的关系

用分子动力学模拟方法研究确定Ａｒ－Ｋｒ溶液的自扩散系数Ｄ１、Ｄ２和互扩散系数Ｄ１２以及它们随温度变化的规律。结果表明，分别用Ｇｒｅｅｎ－Ｋｕｂｏ法和Ｅｉｎｓｔｅｉｎ法得到的扩散系数在数值上一致；该溶液的３种扩散系数均满足Ｄ＝Ｄ０ｅ＾Ｅ／ＲＴ关系。     

Fe/Zn双金属氰化物催化剂催化环氧丙烷聚合的活性结构研究

以氯化锌、铁氰化钾（含有整合剂）的水溶液为原料，合成了铁锌双金属氰化物（DMC）催化剂。为获得高活性的DMC催化剂，需将叔丁醇 、多元醇螯合剂螯合至其结构中，用XRD、XPS等分析手段，对铁锌DMC催化剂的结构与活性进行分析表征。实验发现，DMC催化剂的晶体结构与螯合剂密切相关，螯合剂能显著降低DMC催化剂的结晶程度，从而提高DMC催化剂的活性。同时，氯化锌过量也有利于DMC催化剂活性的提高。并表征了相关DMC催化剂的活性中心。     

高分辨双晶XRF研究酞菁化合物中硫杂质的化学态

酞菁化合物是一种大π键共轭体系的平面分子结构，它以颜色鲜艳、化学稳定性和价格便宜等特点，已在颜料工业上得到了广泛地应用．随着高科技的发展，酞菁化合物的应用进入静电复印的领域．研究中发现：酞普化合物的晶体结构直接影响它的色泽、耐热性、稳定性以及光电导性．在诸多的酸苦晶型中，β-型酞菁是比较稳定的一种，其它晶型届亚稳态型．近年来，光敏性较好的X-型用于激光印刷机感光鼓的载流子产生层［1］．用作静电复印中的酞育粗颜料，一般多为a一型，且含有大量的有机和无机杂质[2]，经高温真空升华提纯后，转变为卢一型．有趣…     

Thermodynamic properties of organic compounds in aqueous solution. II. Apparent molal heat capacities of piperidines,morpholines, and piperazines

Apparent molal heat capacities of some piperidine, morpholine, and piperazine derivatives in aqueous solution have been determined by adiabatic calorimetry in the temperature range 20–55°C and in the molality range 0.2–1m. Comparison of experimental values with those calculated through group contributions, found for monofunctional compounds, indicates strong interactions between the hydrophilic centers. An interpretation is given of the possible mechanism of this interaction. Also, values of ΔC _p for the addition reaction of proton to nitrogen centers of mono- and bifunctional organic compounds are examined.     

5,6—二亚甲基双环[2.2.1]庚—2—醇及其衍生物的旋光与构型

从（－）－（１Ｓ，２Ｒ，４Ｓ）－５，６－二亚甲基双环［２．２．１］庚－２－醇（Ｉ）和（－）－（１Ｓ，２Ｓ，４Ｓ）－５，６－二亚甲基双环［２．２．１］庚－２－醇（Ⅱ）出发，合成了它们的醚类和取代苯甲酸酯类光学纯的衍生物。通过［α］Ｄ测定和构型分析，发现它们是含有３个手性碳（Ｃ１，Ｃ２和Ｃ４）的桥环化合物，其旋光性与构型的关系均符合可极化度多级圆球不对称性模型。     

Setting up of recovery profiles: A tool to perform the compliance with recovery requirements for residue analysis

The use of the recovery term has presented some confusion in Analytical Chemistry. Recent IUPAC recommendations propose to distinguish between two terms: recovery or recovery factor, ℜ, and apparent recovery, ℜ*. Apparent recovery includes recovery factor and a new recovery term proposed in this paper, named calibration recovery, ℜ^C, which depends of the type of systematic error due to the matrix effect (constant and/or proportional) and is related to the applied calibration methodology. This paper highlights the dependence of the calibration recovery on the sample analyte concentration and, for extension, of the apparent recovery, defines the recovery profile, and makes evident the need to determine a “fit for purpose” analyte concentration interval to comply with a regulated recovery requirements. An approach to estimate the calibration recovery and its associated uncertainty in relation to the above-mentioned dependence is presented. The usefulness of the proposed methodology has been shown in the quantification of a pesticide by GC-ECD for assessing dermal exposure.     

Thermodynamic simulation of four-component carnallite type systems

Summary The standard method ofPitzer for predicting the solubility isotherms of systems in which solid phases with a constant composition crystallize is applied to cases when mixed crystals are formed. The four-component carnallite type systems RbCl-CsCl-MgCl₂-H₂O, RbCl-KCl-MgCl₂-H₂O, and RbCl-RbBr-MgCl₂-MgBr₂-H₂O and the corresponding subsystems are thermodynamically simulated at 25°C. It is established that the solubility diagrams consist of crystallization regions of the simple saltsMX,MX, MgX ₂·6H₂O, and MgX₂·6H₂O and of the corresponding carnallite type double salts with the composition 1:1:6. A method of calculation of the integralGibbs energy of mixingG ^mix(s) of crystals formed in water-salt systems has been proposed. The results on the systems RbCl-KCl-H₂O, RbCl-RbBr-H₂O, and MgCl₂-MgBr₂-H₂O are compared with experimental data from the literature and with values calculated using various models.

---

Thermodynamische Simulation von Vierkomponentensystemen des Carnallit-Types

Zusammenfassung DiePitzer-Methode zur Voraussage der Löslichkeitsisothermen in Mehrstoffsystemen, in welchen feste Phasen mit konstanter Zusammensetzung auskristallisieren, wurde auch für Fälle angewendet, bei denen sich Mischkristalle bilden. Die Vierstoffsysteme RbCl-CsCl-MgCl₂-H₂O, RbCl-KCl-MgCl₂-H₂O und RbCl-RbBr-MgCl₂-MgBr₂-H₂O, aus welchen Carnallit-Typ-Mischkristalle auskristallisieren, und die dazugehörigen Dreistoff-Randsysteme wurden bei 25°C simuliert. Man stellt fest, daß die Löslichkeitsdiagramme sowohl Kristallisationsbereiche der einfachen SalzeMX,M'X, MgX ₂·6H₂O und MgX ₂·6H₂O als auch der entsprechenden carnallitartigen Doppelsalze mit der Zuzammensetzung 1:1:6 umfassen. Eine Methode zur Berechnung derGibbs-EnergieG ^mix(s) für die in Wasser-Salz-Systemen gebildeten Mischkristalle wird vorgeschlagen. Die für die Systeme RbCl-KCl-H₂O, RbCl-RbBr-H₂O und MgCl₂-MgBr₂-H₂O erhaltenen Ergebnisse werden mit experimentellen Literaturdaten und Resultaten von Berechnungen aufgrund verschiedener Modelle verglichen.

     

Velocity map imaging of the photolysis of n-C4H9Br in UV region

Using velocity map ion imaging technique, the photodissociation of n-C₄H₉Br in the wavelength range 231–267 nm was studied. The results and our ab initio calculations indicated that the absorption of n-C₄H₉Br in the investigated region originated from the excitations to the lowest three repulsive states, as assigned as 1A″, 2A′ and 3A′ in C_s symmetry. Dissociations occurred on the PES surfaces of the three states, terminating in C₄H₉+Br (²P_3/2) or C₄H₉ + Br^* (²P_1/2) as two channels, and being impacted by an avoided crossing between the PES surfaces of the 2A′ and 3A′ states. The transition dipole to the 1A″ state was perpendicular to the symmetry plane, so perpendicular to the C–Br bond. The transitions to the 3A′ state was polarized parallel to the symmetry plane, and also parallel to the C–Br bond. While the transition dipole to the 2A′ state was in the symmetry plane, but formed an angle of about 53.1° with the C–Br bond. We have also determined the avoided crossing probabilities, which affected the relative fractions of the individual pathways, for the photolysis of n-C₄H₉Br near 234 nm and 267 nm.     

杂原子Y分子筛的二次合成及其吸附脱硫性能

采用液-固相同晶取代反应制备了骨架含Ga的Y型分子筛, 并对其吸附脱硫性能进行了研究. 在室温, 空速为7 h−1的条件下, 镓化Y型分子筛([Ga]AlY)处理噻吩、四氢噻吩、4,6-二甲基二苯并噻吩(4,6-DMDBT)正壬烷溶液(硫含量500 μg•g−1), 每克吸附剂吸附硫的量分别为7.7、17.4、14.5 mg. 采用密度泛函理论(DFT)中的广义梯度近似方法(GGA)计算各分子中硫原子上的电荷数, 噻吩中硫原子的电荷数为−0.159, 而4,6-DMDBT和四氢噻吩分别为−0.214、0.298. 四氢噻吩和4, 6-DMDBT中硫原子上的电子密度大于噻吩中硫原子上的电子密度, 这就使得四氢噻吩和4,6-DMDBT中的硫原子与吸附位间的作用会远大于噻吩中的硫原子与吸附位间的作用, 吸附容量必然会大很多. 采用[Ga]AlY处理抚顺石油二厂的催化裂化汽油(硫含量：299 μg•g−1), 每克吸附剂处理2.1 mL汽油时, 处理后汽油的硫含量为54.8 μg•g−1, 说明[Ga]AlY对汽油脱硫有一定的效果.