碳自掺杂g-C3N4光催化性能的原位光微量热-荧光光谱研究

通过在尿素前驱体中添加单宁酸, 原位缩聚形成碳自掺杂石墨相氮化碳(g-C₃N₄). 利用X射线光电子能谱(XPS)、 场发射扫描电子显微镜(FESEM)、 X射线衍射(XRD)仪和同步热分析(TG-DSC)等方法对碳自掺杂 g-C₃N₄的形貌、 物相结构和能带价态组分进行表征分析, 结合紫外-可见吸收光谱(UV-Vis)和原位光微量热-荧光光谱联用仪获得碳自掺杂g-C₃N₄降解罗丹明B的原位热/动力学信息和三维荧光光谱信息, 探讨了光催化降解罗丹明B的微观机制. 结果表明, 单宁酸浓度≤10 mg/mL时, 碳会取代七嗪单元结构的氮原子形成g-C₃N₄骨架碳自掺杂; 单宁酸浓度≥ 20 mg/mL时, 碳以无定形形式沉积负载在g-C₃N₄表面上形成无定形碳自掺杂. 骨架碳自掺杂g-C₃N₄形成的π电子有效缩短了禁带宽度, 减小了光生电子-空穴复合几率, 比无定形C掺杂g-C₃N₄显示出更优异的光催化性能, 催化主要活性物种为h⁺和·O{}_{\mathrm{2}}^{-}. 碳自掺杂g-C₃N₄光催化降解过程可分为光响应吸热、 降解污染物放热平衡过程和稳定放热3个过程. 其中骨架碳自掺杂g-C₃N₄(C/N摩尔比为0.844)在光照1000 s内, 三维荧光光谱检测的RhB降解率锐减, 光照1000 s后, 其RhB降解率为87.6%, 分别是原始g-C₃N₄和无定形碳自掺杂g-C₃N₄的3.13倍和1.95倍. 光照1000 s后, 光微量热计显示以矿化和降解非荧光发色中间产物为主, 并保持以热变速率为(0.9799±0.5356) μJ/s稳定放热, 为拟零级反应过程, 是光催化反应的决速步骤.     

LC–MS bioanalysis of intact proteins and peptides

Bioanalysis assays that reliably quantify biotherapeutics and biomarkers in biological samples play pivotal roles in drug discovery and development. Liquid chromatography coupled with mass spectrometry (LC–MS), owing to its superior specificity, faster method development and multiplex capability, has evolved as one of the most important platforms for bioanalysis of biotherapeutics, particularly new scaffolds such as half-life extension platforms for proteins and peptides, as well as antibody drug conjugates. Intact LC–MS analysis is orthogonal to bottom-up surrogate peptide approach by providing whole molecule quantitation and high-level sequence and structure information. Here we review the latest development in LC–MS bioanalysis of intact proteins and peptides by summarizing recent publications and discussing the important topics such as the comparison between top-down intact analysis and bottom-up surrogate peptide approach, as well as simultaneous quantitation and catabolite identification. Key bioanalytical issues around intact protein bioanalysis such as sensitivity, data processing strategies, specificity, sample preparation and LC condition are elaborated. For peptides, topics including quantitation of intact peptide vs. digested surrogate peptide, metabolites, sensitivity, LC condition, assay performance, internal standard and sample preparation are discussed.     

An evaluation method for measuring SPL and mode shape of tire cavity resonance by using multi-microphone system

This paper presents an evaluation method for measuring the sound pressure level and mode shapes of tire cavity resonance by using a multi-microphone system. Two commercial tires were evaluated to compare abilities of noise suppression by means of this method in the range of the first resonance from 200 to 260 Hz. One tire was a special tire that suppresses tire cavity resonance with polyurethane foam mounted on the tire’s inner liner. The other tire was a normal tire with no polyurethane foam. The mode shape change from vertical to horizontal direction in both tires. However, the sound pressure level of the special tire was lower than the normal tire at all frequencies.     

Molecular‐level structures at poly(4‐vinyl pyridine)/acid interfaces probed by nonlinear vibrational spectroscopy

The molecular structures of the interfaces between a solid poly(4‐vinyl pyridine) (P4VP) surface and poly(acrylic acid) (PAA) as well as hydrochloric acid (HCl) solutions were probed using sum frequency generation (SFG) vibrational spectroscopy in situ in real time. Spectroscopic results clearly reveal that the PAA molecules are adsorbed onto the P4VP surface via hydrogen bonding at the P4VP/PAA solution interface while the P4VP surface is protonated at the P4VP/HCl solution interface. Consequently, the water molecules near the interfaces are strongly perturbed by these two interactions, exhibiting different orderings at the two interfaces. This work clearly demonstrates the power of studying the interfacial molecular‐level structures via nonlinear vibrational spectroscopy when molecular adsorption happens at the solid–liquid interface and paves a way for our future study on tracing the adsorption dynamics of polymer chains onto solid surfaces. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 848–852     

CO2-3掺杂纳米羟基磷灰石晶体的合成与表征

CO2-3掺杂是提高纳米羟基磷灰石（n-HA）生物活性的有效方法之一。以 Ca（NO3）2·4H2O 和Na3PO4·12H2O为主要原料，Na2CO3作为CO2-3来源，合成纳米碳羟基磷灰石（n-CHA）晶体。采用TEM ， XRD ，FTIR ，RS对合成晶体形貌和结构进行表征。结果表明：合成的n-HA晶体长度约为60～80 nm ，宽度在20～30 nm之间，形状为针状，具有良好的结晶度，与自然骨磷灰石形貌相似；n-CHA晶体随CO2-3掺入量的增加，结晶度降低；合成的 n-CHA晶体的晶胞参数 a值随着CO2-3加入量的增大不断收缩，但 c值增大，参数比c/a值增大，符合B型取代（取代PO3-4）的晶胞参数变化规律。红外谱图中，872 cm -1附近出现AB混合型取代（同时取代O H -，PO3-4）的CO2-3面外弯曲振动特征红外峰，同时CO2-3的不对称伸缩振动红外峰在1454和1420 cm -1附近出现分裂峰，1540 cm -1附近出现弱CO2-3峰；1122 cm -1附近出现CO2-3对称伸缩振动拉曼峰，1071 cm -1附近出现CO2-3的B型替代特征拉曼峰，通过计算PO3-4，CO2-3，O H -拉曼峰的积分面积比PO3-4/CO2-3，O H -/CO23，PO3-4/O H -，表明CO2-3在替换时，先以B型为主，随着CO2-3掺入量的增加，发生A型替代（取代O H -）。实验结果表明，合成的磷灰石晶体为B型取代（取代PO3-4）为主的AB混合型取代的 n-CHA。与人骨磷灰石晶体在形态、尺寸、晶体结构和生长方式上具有相似性，可称为类骨磷灰石。     

中西部地区人口就近城镇化意愿的受教育程度差异研究

基于对中西部地区15个省市农业转移人口就近城镇化意愿的问卷调查数据,以社会认同度为研究视角,构建多群组结构方程模型分析中西部地区人口就近城镇化的受教育程度差异及其影响因素。研究结果表明:个人特征差异性对中西部地区不同受教育程度的农业转移人口的就近城镇化意愿影响显著;中西部地区不同受教育程度的农业转移人口的社会认同度与其就近城镇化意愿显著正相关,且社会认同度对中西部地区小学及以下学历的农业转移人口就近城镇化意愿的影响最显著,大专及以上学历的农业转移人口的就近城镇化意愿受社会认同度的影响最小。     

NARROW BANDWIDTH BRIGHT SCARLET ORGANIC ELECTROLUMINESCENT DEVICE BASED ON N,N'-BIS[4-(N,N-DIMETHYLAMONO)-BENZYLIDENE]-DIAMINOMALEONITRILE DYE

A novel red dye, N, N'-bis[4-(N,N-dimethylamino)-benzylidene]diaminomaleonitrile (BAM), was prepared by reacting diaminomaleonitrile with 4-(N,N-dimethylamino)-benzaldehyde and were characterized by ¹H NMR, UV absorption and photoluminescence. The BAM dye showed an absorption peak wavelength of 530 nm and bright photoluminescence with a peak wavelength at 675 nm. It was used as the doped emitter for fabricating a bright scarlet organic electroluminescent (EL) device. The structure of the double-layer EL device consisted of a hole-transport layer and a luminescent layer between ITO glass and magnesium electrodes. The hole-transport layer was a poly(N-vinylcarbazole) (PVK) film. The luminescent layer consisted of a host material, 8-hydroxyquinoline aluminum (Alq₃), and BAM dye as the dopant. A bright light with the peak of 620 nm and narrow bandwidth of 50 nm was obtained in the device with a maximum luminance of 6230 cd/m². The emission spectra almost unchanged as the luminance increased with increasing injection current and the bias voltage. A tentative explanation from both the electronic distribution viewpoint and the molecular geometric analysis for the narrow bandwidth of this red dye was offered.     

Bi掺杂锐钛矿相TiO2第一性原理计算

采用密度泛函理论(DFT)下的第一性原理平面波超软赝势方法计算了Bi掺杂前后锐钛矿相TiO2的电子结构和光学性质。结果分析发现:掺杂后Ti的电荷布居数下降,O的布居数增加;同时在TiO2禁带中引入了杂质能级,禁带宽度略微变大,但是杂质能级的作用抵消了禁带宽度变大带来的不利影响,使得掺杂后TiO2吸收带边红移并在可见光范围内吸收明显增强。     

Statistical discrimination of steroid profiles in doping control with support vector machines

Due to their performance enhancing properties, use of anabolic steroids (e.g. testosterone, nandrolone, etc.) is banned in elite sports. Therefore, doping control laboratories accredited by the World Anti-Doping Agency (WADA) screen among others for these prohibited substances in urine. It is particularly challenging to detect misuse with naturally occurring anabolic steroids such as testosterone (T), which is a popular ergogenic agent in sports and society.