Spectral Studies on Some Pyrimidine Derivatives in Different Solvents

The electronic absorption spectra of 2-aminopyrimidine (compound I), 2-amino-4-methylpyrimidine (compound II), 2-amino-4,6-dimethylpyrimidine (compound III), 2-amino-4,6-dimethoxypyrimidine (compound IV), 4-amino-2,6-dimethylpyrimidine (compound V), and 4,5-diamopyrimidine (compound VI) have been measured in water and in a series of different organic solvents. The solvent effects on the spectra are discussed and the solvent induced spectral shifts are analyzed in terms of different solute–solvent interaction mechanisms, using the multiple linear regression technique.     

Complexation of a Macrocycle Containing Thiopyrimidine and Uracil Moieties with Dicarboxylic and Amino Acids in Various Organic and Aqueous Organic Solutions

The complexation of a macrocycle containing thiopyrimidine and uracil moieties (M) with amino acids and some dicarboxylic acids was studied by pH-metric, UV-VIS, ¹H NMR spectroscopy methods in chloroform, methanol, aqueous 1,4-dioxane, and biphasic water–chloroform media. The complexation of M with acids is too weak to solubilize them from the solid state into chloroform solutions containing M. The ¹H NMR spectra and pH-metric data of aqueous 1,4-dioxane (80 vol.%) reveal the pH-dependent 1:1 binding between M and the acids studied. The protonation of M is not a prerequisite for binding of fumaric, succinic, o-phtalic acids and the series of amino acids, whereas binding of maleic acid requires the protonation of both thiopyrimidine moieties of M. Therefore,M·(H⁺)₂ exhibits strong selectivity towards maleic acid in aqueous 1,4-dioxane and in biphasic water–chloroform media.     

Reaction of 2-alkylthio-6-amino-pyrimidin-4(3H)-ones with ethyl bromopyruvate. Synthesis of furo-[2,3-<Emphasis Type="Italic">d</Emphasis>]-pyrimidine and furo[3,2-<Emphasis Type="Italic">e</Emphasis>]imidazo-[1,2-<Emphasis Type="Italic">c</Emphasis>]pyrimidine carboxylates

Reaction of 2-alkylthio-6-aminopyrimidin-4(3H)-ones with ethyl bromopyruvate to give ethyl 2-alkyl-thio-4-aminofuro[2,3-d]pyrimidine-5-carboxylates has been shown to proceed under neutral or acidic conditions. The obtained furo[2,3-d]pyrimidines underwent further cyclocondensation reaction with ethyl bromopyruvate to afford diethyl 5-alkylthiofuro[3,2-e]imidazo[1,2-c]pyrimidine-2,9-dicarboxy-lates. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 440–443, March, 2009.     

NMR analysis of a series of substituted pyrazolo[3,4-d] pyrimidines-4-amines

A series of 21 substituted pyrazolo[3,4-d]pyrimidines-4-amines were studied by (1)H and (13)C NMR. The application of two-dimensional techniques, HMQC and HMBC, allowed the complete assignment of the spectra for all the compounds.     

Differentiation between [1,2,4]triazolo[1,5‐a] pyrimidine and [1,2,4]triazolo[4,3‐a]‐ pyrimidine regioisomers by 1H?15N HMBC experiments

The condensation of malonoaldehyde derivatives with either a 3‐amino‐[1,2,4]‐triazole or a 3,5‐diamino‐[1,2,4]‐triazole precursor was studied. In agreement with previous reports, two different bicycles, namely, bearing the regioisomeric [1,2,4]triazolo[1,5‐a]pyrimidine ( 1 ) or[1,2,4] triazolo [4,3‐a]pyrimidine ( 2 ) structural surrogates, could be obtained. We found that, depending on the triazole precursor, only one regioisomer resulted, either of the 1 or 2 series. We also observed that these two structural surrogates could be unambiguously differentiated by indirectly measuring their ¹⁵N chemical shifts by ¹H? ¹⁵N HMBC experiments. The occasional conversion of [1,2,4]triazolo[4,3‐a]pyrimidines to the [1,2,4]triazolo[1,5‐a]pyrimidine counterparts could be unequivocally determined by ¹⁵N NMR data. Copyright © 2010 John Wiley & Sons, Ltd.     

Comparison and prediction of the retention in micellar electrokinetic chromatography and microemulsion electrokinetic chromatography for disubstituted benzenes

Retention index (I), rather than retention factor (k), was found to be a more reasonable parameter for comparison of the relative affinity of disubstituted benzenes in MEEKC and MEKC, due to independent of I with the SDS surfactant concentration. MEKC and MEEKC may give similar or different I values, depending on types of moieties. With known I and K_ow for alkylbenzenes as references in MEKC and MEEKC, the values of K_ow for disubstituted benzenes can be estimated from the observed I values, where K_ow is the octanol–water distribution constant. In addition, a group additive approach can be used to predict I for disubstituted benzenes with different moieties from the average observed I for the disubstituted benzenes with same moieties. However, electronic effects and/or intramolecular interaction may result in the different observed I from prediction.     

Synthesis of new pyrazolo[4,3-e]-1,2,4-triazolo[1,5-c]pyrimidines and related heterocycles

The reaction between 5-amino-4-imino-1(2)-substituted-1(2)H-4,5-dihydropyrazolo[3,4-d]pyrimidines and several commercially available reactants afforded new heterocycles with a conserved pyrazolo[3,4-d]pyrimidine nucleus. The key intermediates employed proved to be suitable compounds by virtue of their two vicinal amino and imino groups that were used to obtain five, six and seven-membered rings.     

Utility of (p‐Sulfonamidophenyl)azomalononitrile,and Ethyl Acetoacetate in Synthesis of Fused Azole and Azines Derivatives II

[(p‐Sulfonamidophenyl)azo]malononitrile ( 1a,b ) reacted with N‐cyclohexanemethylidene‐2‐cyanoacetohydrazide, N'‐arylmethylidene‐2‐cyanoacetohydrazide ( 3a‐c ), S‐methylthiourea and hydrazine hydrate to afford [1,2,4]triazolo‐[1,5‐a]pyridinone derivatives ( 2a,b ) & ( 4a‐c ), substituted pyrimidines 5a,b and 6a,b. The corresponding pyridazinones 7a,b were synthesized from the reaction of 1c,d with ethyl cyanoacetate. Compound 7a,b reacted with elemental sulfur to yield 8a,b . Compound 6a underwent cycloaddition with α‐cinnamonitrile 9a‐e to yield 11a‐c, 14 and 15 . Also, compound 6a reacted with β‐ketoester and 1,3‐diketones to give 16, 17 and 18 .     

Regioselective synthesis of 1- and 4-substituted 7-oxopyrazolo[1,5-a]pyrimidine-3-carboxamides

The synthesis of 7-substituted pyrazolo[1,5-a]pyrimidine-3-carboxamides was studied. First, methyl 7-hydroxypyrazolo[1,5-a]pyrimidine-3-carboxylate (5) was prepared in three steps from methyl 5-amino-1H-pyrazole-4-carboxylate (3). Treatment of 5 with POCl₃ gave the highly reactive 7-chloro derivative 10, which was reacted with amines, benzyl alcohol, and phenylboronic acid in the presence of Pd-catalyst to give the corresponding 7-substituted derivatives 11. Hydrolysis of the esters 5 and 11 followed by amidation gave the corresponding carboxamides 16a–h and 15. Regioselectivity of N-alkylation of 7-hydroxypyrazolo[1,5-a]pyrimidine-3-carboxylic acid derivatives 5 and 16 was tunable by the carboxy function. Alkylation of the secondary amides 16a–f furnished the 1-alkyl derivatives 17a–f, whereas the ester 5 and the tertiary amides 16g,h gave the 4-alkyl derivatives 14a–d and 16m,n, selectively.     

Disassembly Kinetics of Quinone‐Methide‐Based Self‐Immolative Spacers that Contain Aromatic Nitrogen Heterocycles

We prepared several pyridine‐ and pyrimidine‐based self‐immolative spacer groups to evaluate the significance of the resonance energy of the spacer aromatic ring on the kinetics of 1,4‐ and 1,6‐elimination reactions, which govern spacer disassembly. Subsequently, we relied on a photoactivation procedure to accurately analyze the disassembly kinetics. Beyond providing new results that are relevant for deriving quantitative structure–property relationships, herein, we demonstrate that pH value can be used as an efficient parameter to finely control the disassembly time of a self‐immolative spacer after an initial activation.