The effects of activated carbon supports on the structure and properties of TiO2 nanoparticles prepared by a sol-gel method

TiO₂-coated activated carbon (TiO₂/AC) composites and pure TiO₂ powders were prepared by a sol-gel method using tetrabutylorthotitanate as a precursor. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), differential thermal analysis (DTA), X-ray photoelectron spectrum (XPS) and nitrogen absorption. The photoactivity of samples was evaluated by methylene blue (MB) degradation. The analysis results show that compared with pure TiO₂ powders, the spherical-shaped TiO₂ particles are well-dispersed in the AC matrix and the size of the resulting TiO₂ crystallites decreases to below 40 nm with increasing phase transformation temperature. The AC matrix creates anti-calcination effects and shows interfacial energy effects that control the growth of the TiO₂ particles, baffle the anatase to rutile phase transition, and cumber the TiO₂ particles to agglomerate. Compared with the surface areas of TiO₂ powders, the combination of TiO₂ and AC forms composites with high surface areas which are slightly affected by calcination temperature. By AC support, the photoactivity of TiO₂ is increased in MB photocatalytic course, possible because active carbon increases photocatalytic activity of TiO₂ particles by producing high concentration of organic compound near TiO₂, and small-size TiO₂ particles are well-dispersed on the surface of AC.     

Realization of an efficient coherent combination via Michelson cavity

An intracavity coherent coupling Michelson erbium-doped fibre (EDF) laser (MCEDFL) is proposed and demonstrated. By using this laser system, we find a means to obtain a maximum power output at the same pumping power level. From the experiment based on fibre Bragg gratings (FBGs) with different reflectivities from 6{\%} to 100{\%}, we find that the reflectivity of the FBG plays a vital role in improving the performance of the MCEDFL. At the same time, the MCEDFL with a polarizer can be coherently combined effectively. This type of system, in principle, is compatible with other more powerful pumping methods, such as cladding pumping, and brings some novel perspectives to the realization of high power lasers.     

单壁碳纳米管-聚合物复合材料的拉曼光谱表征(英文)

本文在粗糙金属表面上制作了单壁碳纳米管—聚乙烯醇复合材料,并利用表面增强拉曼散射讨论了碳纳米管与聚乙烯醇之间的相互作用     

Effects of initial frequency chirp on the linear propagation characteristics of the exponential optical pulse

In this paper, the linear propagation characteristics of the exponential optical pulse with initial linear and nonlinear frequency chirp are numerically studied in a single mode fibre for \be₂<0. It can be found that the temporal full width at half maximum and time-bandwidth product of exponential pulse monotonically increase with the increase of propagation distance and decrease with the increase of linear chirp C for C<0.5, go through an initial decreasing stage near \zeta=1, then increase with the increase of propagation distance and linear chirp C for C\geq0.5. The broadening of pulses with negative chirp is faster than that with positive chirp. The exponential pulse with linear chirp gradually evolves into a near-Gaussian pulse. The effect of nonlinear chirp on waveform of the pulse is much greater than that of linear chirp. The temporal waveform breaking of exponential pulse with nonlinear chirp is first observed in linear propagation. Furthermore, the expressions of the spectral width and time-bandwidth product of the exponential optical pulse with the frequency chirp are given by use of the numerical analysis method.     

Microstructure performance and formation mechanism of laser alloying rare earth oxides modified nanocrystalline layer on TA7

Nanoscale particles (NP) were observed in a Ni60–Ag–Si₃N₄–Y₂O₃ laser alloying (LA) layer on a TA7 titanium alloy, NP usually locate on the grain boundaries, which are able to block the motion of dislocation in a certain extent. Such layer mainly consisted of γ-Ni, TiN, γ-(Fe, Ni), TiAg and lots of amorphous phases. The wear resistance of such layer with laser scanning speed 3 mm/s was better than that of a LA layer with 6 mm/s, which was mainly ascribed to an uniform microstructure and less defect of layer. The high laser scanning speed made the existing time of laser molten pool be shorter than before, favoring the formation of a fine microstructure. However, the defects, such as pores were produced in LA layer (higher scanning speed), decreasing the wear resistance.     

Variation of gamma radiation shielding properties with incident photon energy and penetration depth for WC/Al composites

In this work, we examined the usefulness of the WC_x/Al_100?x composites (x?=?10, 20, 50, 80 wt. %) for gamma-ray shielding materials. The mass attenuation coefficient (μ/ρ), effective atomic number (Z_eff), electron density (N_e) and energy absorption buildup factor (EABF) and exposure buildup factor (EBF) for WC_x/Al_100?x composites have been calculated by theoretical approach using XCOM program within the energy range 1?keV–100?GeV, 10 keV–1?GeV, 10 keV–1?GeV and 0.015?MeV–15?MeV, respectively. The results showed that both the values of mass attenuation coefficient and Z_eff of the WC_x/Al_100?x composites tend to increase with the increase of the WC concentration. For the energy region below 3?MeV, the WC₈₀/Al₂₀ composite was found to possess superior gamma-ray shielding effectiveness due to its higher values of both mass attenuation coefficient and effective atomic number, and lower values of both EABF and EBF values. However, for the energy region above 3?MeV, the EBF and EABF values of the WC/Al composites are directly proportional to their Z_eff values, leading to the lowest EBF and EABF values of the WC₁₀/Al₉₀ composites.     

太赫兹无损检测的多特征参数神经网络分析技术

提出一种基于太赫兹无损检测的多特征参数神经网络分析技术,用于分析耐高温复合材料的粘贴质量无损检测.采用抽片式方法设计了一种耐高温复合材料的脱粘缺陷样品,抽片厚度为0.1mm.采用太赫兹时域光谱无损检测技术对耐高温复合材料的多层脱粘缺陷进行了检测试验研究,对比了上下脱粘缺陷所对应的太赫兹时域波形及频谱信息的异同,针对性地建立了耐高温复合材料粘贴质量的上层脱粘参数、下层脱粘参数、频域吸收质心参数等多特征参数,将特征参数进行优化作为反向传播神经网络的输入并对其进行上下脱粘分类识别.通过对反向传播神经网络的训练测试,实现了耐高温复合材料上层脱粘0.1mm、下层脱粘0.1mm的脱粘缺陷的识别.     

Design and tensile properties of aluminum borate whiskers reinforced aluminum composite with low whisker volume fraction

ZnO was firstly coated on the surface of aluminum borate whiskers (ABOw) by sol–gel. Then, ZnO-coated ABOw was added into soybean slurry to make a preform with low volume fraction and the preform was sintered at high temperatures to obtain a sufficient strength. ABOw reinforced aluminum composite (ABOw/Al) was fabricated by squeeze casting. Interfacial microstructures, tensile properties, and fracture mechanisms of the ABOw/Al composite were investigated. The results show that the coating of ABOw and the addition of soybean sacrificial filler can effectively decrease the volume fraction of whiskers in the composite. The ultimate tensile strength of composite has not changed much with the decrease of whiskers volume fraction in the composite. However, the elongation to fracture of the composite evidently increases and it can reach 11.1% at room temperature.     

Insight into 3D micro‐CT data: exploring segmentation algorithms through performance metrics

Three‐dimensional (3D) micro‐tomography (µ‐CT) has proven to be an important imaging modality in industry and scientific domains. Understanding the properties of material structure and behavior has produced many scientific advances. An important component of the 3D µ‐CT pipeline is image partitioning (or image segmentation), a step that is used to separate various phases or components in an image. Image partitioning schemes require specific rules for different scientific fields, but a common strategy consists of devising metrics to quantify performance and accuracy. The present article proposes a set of protocols to systematically analyze and compare the results of unsupervised classification methods used for segmentation of synchrotron‐based data. The proposed dataflow for Materials Segmentation and Metrics (MSM) provides 3D micro‐tomography image segmentation algorithms, such as statistical region merging (SRM), k‐means algorithm and parallel Markov random field (PMRF), while offering different metrics to evaluate segmentation quality, confidence and conformity with standards. Both experimental and synthetic data are assessed, illustrating quantitative results through the MSM dashboard, which can return sample information such as media porosity and permeability. The main contributions of this work are: (i) to deliver tools to improve material design and quality control; (ii) to provide datasets for benchmarking and reproducibility; (iii) to yield good practices in the absence of standards or ground‐truth for ceramic composite analysis.     

Nonlinear compression of optical solitons

In this paper, we consider nonlinear Schrödinger (NLS) equations, both in the anomalous and normal dispersive regimes, which govern the propagation of a single field in a fiber medium with phase modulation and fibre gain (or loss). The integrability conditions are arrived from linear eigen value problem. The variable transformations which connect the integrable form of modified NLS equations are presented. We succeed in Hirota bilinearzing the equations and on solving, exact bright and dark soliton solutions are obtained. From the results, we show that the soliton is alive, i.e. pulse area can be conserved by the inclusion of gain (or loss) and phase modulation effects.