Evidences of phase separation in moisture‐cured poly(urethane urea)s by means of temperature modulated differential scanning calorimetry

The degree of phase separation in several moisture‐cured poly(urethane urea)s (PUUs) was studied by FTIR spectroscopy, wide angle X‐ray diffraction (WAXD), and temperature‐modulated differential scanning calorimetry (TMDSC). This latter technique was shown to be particularly useful in analysing the degree of phase separation in PUU polymers. Both phase mixing and phase segregation coexisted in the PUUs and the degree of phase separation increased as the urea hard segment (HS) content in the PUU increased. The maximum solubility of urea HSs into the polyol soft segments (SSs) was achieved for 50 wt % urea HS content in diol‐based PUUs, whereas for triol‐based PUUs the highest solubility between HS and SS was reached for lower urea HS amount. Finally, the higher the urea HS content the higher the extent of phase separation in the PUU. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3034–3045, 2007     

Glass transitions and mixed phases in block SBS

Differential scanning calorimetry (DSC) does not allow for easy determination of the glass‐transition temperature (T_g) of the polystyrene (PS) block in styrene–butadiene–styrene (SBS) block copolymers. Modulated DSC (MDSC), which deconvolutes the standard DSC signal into reversing and nonreversing signals, was used to determine the (T_g) of both the polybutadiene (PB) and PS blocks in SBS. The T_g of the PB block was sharp, at ?92 °C, but that for the PS blocks was extremely broad, from ?60 to 125 °C with a maximum at 68 °C because of blending with PB. PS blocks were found only to exist in a mixed PS–PB phase. This concurred with the results from dynamic mechanical analysis. Annealing did not allow for a segregation of the PS blocks into a pure phase, but allowed for the segregation of the mixed phase into two mixed phases, one that was PB‐rich and the other that was PS‐rich. It is concluded that three phases coexist in SBS: PB, PB‐rich, and PS‐rich phases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 276–279, 2005     

Modulated DSC for gas hydrates analysis

Modulated DSC has been applied to the study of methane, ethane and propane hydrates at different hydrate and ice concentrations. The reversing component of the TMDSC curves, makes it possible to characterize such hydrates. Methane and ethane hydrates show the melting-decomposition peak at a temperatures higher than the ice contained in the sample, while propane hydrate melts and decomposes at lower temperature than the ice present in the sample. The hydrate peaks tend to disappear if the hydrate is stored at atmospheric pressure. Guest size and cavity occupation fix the heat of dissociation and stability of the hydrates, as confirmed by parallel tests on tetrahydrofurane hydrates.     

Annealing behavior of gel‐spun polyethylene fibers at temperatures lower than needed for significant shrinkage

The annealing at 373 K of ultrastrong, gel‐spun polyethylene (PE) has been studied. At this temperature, the fibers show no significant shrinkage. Still, a significant decrease in the mechanical properties is observed. The fibers have been analyzed with differential scanning calorimetry (DSC), temperature‐modulated differential scanning calorimetry (TMDSC), atomic force microscopy (AFM), and small‐angle X‐ray scattering (SAXS). During the annealing, the glass transition of the intermediate phase is exceeded, as shown by DSC. When split for structure analysis by AFM, the annealed fibers undergo plastic deformation around the base fibrils instead of brittle fracture. The quasi‐isothermal TMDSC experiments are compared to the minor structural changes seen with SAXS and AFM. The loss of performance of the PE fibers at 373 K is suggested to be caused by the oriented intermediate phase, and not by major changes in the structure or morphology. The overall metastable, semicrystalline structure is shown by TMDSC to posses local regions that can melt reversibly. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 403–417, 2003     

Temperature‐modulated differential scanning calorimetry studies on the origin of double melting peaks in isothermally melt‐crystallized poly(L‐lactic acid)

In this work, the melting behaviors of nonisothermally and isothermally melt‐crystallized poly(L ‐lactic acid) (PLLA) from the melt were investigated with differential scanning calorimetry (DSC) and temperature‐modulated differential scanning calorimetry (TMDSC). The isothermal melt crystallizations of PLLA at a temperature in the range of 100–110 °C for 120 min or at 110 °C for a time in the range of 10–180 min appeared to exhibit double melting peaks in the DSC heating curves of 10 °C/min. TMDSC analysis revealed that the melting–recrystallization mechanism dominated the formation of the double melting peaks in PLLA samples following melt crystallizations at 110 °C for a shorter time (≤30 min) or at a lower temperature (100, 103, or 105 °C) for 120 min, whereas the double lamellar thickness model dominated the formation of the double melting peaks in those PLLA samples crystallized at a higher temperature (108 or 110 °C) for 120 min or at 110 °C for a longer time (≥45 min). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 466–474, 2007     

Obtaining Kinetic Parameters by Modulated Thermogravimetry

A new technique, called modulated thermogravimetry, is introduced as a tool for obtaining continuous kinetic information for decomposition and volatilization reactions. The approach makes use of an oscillatory temperature program to obtain kinetic parameters during a mass loss. MTGA™ may be used under quasi-isothermal conditions to observe a single mass loss or may be combined with linear heating rate or Hi-Res™ controlled rate thermogravimetry to scan from one mass loss region to another. Results obtained are in agreement with those obtained by other kinetic methods. This revised version was published online in July 2006 with corrections to the Cover Date.     

A study of PBT/PC blends by modulated DSC and conventional DSC

Two poly(butylene terephthalate)/polycarbonate (PBT/PC) blends with different formulations were analyzed by modulated DSC (MDSC) and conventional DSC to determine differences in crystallization behavior. A significant difference (30°C in cold crystallization temperature) between the two samples was detectable by MDSC while no significant difference was seen by conventional DSC. That indicatesthe total heat flow from MDSC is not always equivalent to the heat flow from conventional DSC as we have assumed or seen before. The reason has not been fully understood, but may be related to unusual nucleation and crystallization induced by modulation. Alternative conventional DSC methods were developed and compared to the MDSC results.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe authors like to thank Drs. Bernhard Wunderlich and Robert Gallucci for helpful discussion, David Shaker and Mary Parsonage for some DSC experiments. Technical support from TA Instruments is also greatly appreciated.     

二氧化碳和氧气的快速电化学方法联合测定

根据Ｏ２和ＣＯ２在二甲亚砜（ＤＭＳＯ）介质中Ｐｔ电极上的伏安特性，采用微电极并结构计算机控制的电位调制技术，建立了快速联合测定ＣＯ２和Ｏ２的调制电位脉冲库仑法和调制电位脉冲电流法，取得了满意的结果。一次测量时间快达４０ｍｓ。ＣＯ２检测范围０￣１０％（体积百分比）；Ｏ２检测范围不受限制。通过编程设计特定的调制电位－时间波形，可保持连续检测的长期稳定性。     

Non isothermal heat capacities and chemical reactions using a modulated DSC

An evaluation of measurements of heat capacities by modulated differential scanning calorimetry, MDSC is presented. Heat capacities were obtained from 130 to 550 K by a non isothermal technique in which a periodic modulation was added to the linear heating rate. Effects of amplitude and period of modulation, sample weight, sample type, pan type, and cell imbalance are described. Results are compared with those obtained using the isothermal technique. Heat capacity could be measured well into the decomposition region and separated from the non reversing signal due to chemical reaction (degradation), thus allowing a precise detection of onsets of the thermal degradation. This additional information will aid in the interpretation of the degradation chemistry, a field vital for the petroleum-industry.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayPart of this paper was presented at the 23rd Conference of the North American Thermal Analysis Society, Toronto, Canada, September 25–28, 1994.The author (MVN) acknowledges the experimental assistance provided by J. Balogh of Exxon Research and Engineering Company, Linden. Helpful discussions with A. Boller of the University of Tennessee at Knoxville, Dr. Y. Jin, General Electrical, and Dr. S. Sauerbrunn formerly of TA Instruments are also acknowledged.     

Where are the Sn atoms in LaSb2Snx, 0.1?x?∼0.75?

The composition range and (composite modulated) structure of compounds within the wide range non-stoichiometric LaSb₂Sn_x, 0.1?x?0.75, solid solution is carefully investigated via a combined electron diffraction, XRD and electron probe microanalysis study. Evidence for metastability of the LaSb₂Sn_x phase at the low x composition end of the solid solution is presented. Direct evidence is found for a reasonably (although by no means perfectly) well ordered Sn sub-structure which is, in general, mutually incommensurable with respect to a very well ordered underlying LaSb₂ sub-structure along both a and c directions. The overall (3+2)-d superspace group symmetry is given along with a discussion of the consequences as regards the arrangement of the Sn atoms. The Sn sub-structure c-axis cell dimension shows very little variation with composition x providing direct experimental evidence of the importance of Sn-Sn metallic bonding (along one-dimensional [001] Sn strings) for the stability of the phase.