含丙氧甲基冠醚侧基的线型聚甲基硅氧烷液膜离子传输性能

烯丙氧甲基１５－冠－５和１８－冠－６与甲基二氯硅烷进行硅氢加成，再与端羟基硅油反应，三甲基氯硅烷封端，得到两种冠醚含量适中、结构确定的含冠醚侧基的线型聚甲基硅氧烷．以两种聚合物冠醚为流动载体，采用大块液膜装置，研究了载体和阳离子的种类、成盐阴离子的种类、载体的浓度及盐的浓度对离子迁移的影响，并考察了膜的稳定性．     

聚合物结构与其膜的气体渗透性

对聚合物结构与膜的气体渗透性之间的关系进行了简要综述，并就高性能分离膜材料应该具备的高分子链结构及聚集态结构作了进一步探讨。     

Mild synthesis of a Zn(II) metal organic polymer and its hybrid with activated carbon: Application as antibacterial agent and in water treatment by using sonochemistry: Optimization,kinetic and isotherm study

In this work, a room temperature and short method (30 min) for synthesis of nanosized rod-like metal organic polymer (MOP) has been described. Reaction of 1,4-phenylenedioxy diacetic acid with zinc salt leads to the formation of [Zn(C₁₀H₈O₆)(H₂O)₄]_n and subsequently was loaded on activated carbon following sonication and structurally characterized by FTIR, SEM, EDX and XRD analysis. The combination of this new composite with sonication was applied for rapid and efficient adsorption of Bromocresol Purple (BCP). Effects of initial BCP concentration, mass of adsorbent and sonication time on response were investigated and optimized by central composite design (CCD). Analysis of variation (ANOVA) was adapted to experimental data to find best optimum conditions which was set at 15.22 mg L⁻¹, 2.41 min, 0.02 g and 0.009 mg for initial BCP concentration, sonication time and adsorbent mass, respectively. Conduction of similar experiments at specified condition permit achievement of 98.69% removal percentage. 1,4-phenylenedioxy diacetic acid and Zn(NO3)₂.4H₂O which have applied for preparation of MOP are interesting antibacterial properties and accordingly MOP was screened in vitro for their antibacterial actively against Proteus vulgaris bacteria and experimental results reveal this MOP was able to inhibit growth of the tested bacteria. The experimental data were best fitted by pseudo-second order and Langmuir for kinetic model and the adsorption equilibrium isotherm, respectively.     

偶氮聚合物薄膜的全光极化研究

报告了分散红共聚物膜HMMM-DR1,HMMM-DR19和偶氮侧链聚合物膜PCN6和PCN2的合成和制备, 并以HMMM-DR1和PCN6为代表比较研究了这两种具有不同吸收性质材料的全光极化特性,研究了他们的实时极化和弛豫过程,对他们的全光极化性质作了最基本的表征.研究了倍频光吸收对薄膜光极化效率的影响,讨论了偶氮聚合物材料光诱导二阶非线性极化率的效率和倍频光透射率之间的折衷关系,这对实用化的全光器件的研制是至关重要的.实验确证了在PCN6薄膜中实现了准相位匹配.对厚膜中光诱导二阶非线性极化率的弛豫抑制效应作出解释.     

Microfabrication of stacks of acoustic matching layers for 15 MHz ultrasonic transducers

This paper presents a novel method used to manufacture stacks of multiple matching layers for 15 MHz piezoelectric ultrasonic transducers, using fabrication technology derived from the MEMS industry. The acoustic matching layers were made on a silicon wafer substrate using micromachining techniques, i.e., lithography and etch, to design silicon and polymer layers with the desired acoustic properties. Two matching layer configurations were tested: a double layer structure consisting of a silicon–polymer composite and polymer and a triple layer structure consisting of silicon, composite, and polymer. The composite is a biphase material of silicon and polymer in 2-2 connectivity. The matching layers were manufactured by anisotropic wet etch of a (1 1 0)-oriented Silicon-on-Insulator wafer. The wafer was etched by KOH 40 wt%, to form 83 μm deep and 4.5 mm long trenches that were subsequently filled with Spurr’s epoxy, which has acoustic impedance 2.4 MRayl. This resulted in a stack of three layers: The silicon substrate, a silicon–polymer composite intermediate layer, and a polymer layer on the top. The stacks were bonded to PZT disks to form acoustic transducers and the acoustic performance of the fabricated transducers was tested in a pulse-echo setup, where center frequency, −6 dB relative bandwidth and insertion loss were measured. The transducer with two matching layers was measured to have a relative bandwidth of 70%, two-way insertion loss 18.4 dB and pulse length 196 ns. The transducers with three matching layers had fractional bandwidths from 90% to 93%, two-way insertion loss ranging from 18.3 to 25.4 dB, and pulse lengths 326 and 446 ns. The long pulse lengths of the transducers with three matching layers were attributed to ripple in the passband.     

The 650-nm variable optical attenuator based on polymer/silica hybrid waveguide

Visible light variable optical attenuators(VOA) are essential devices in the application of channel power regulation and equalization in wavelength-division multiplexing cross-connect nodes in plastic optical fiber(POF) transmission systems.In this paper, a polymer/silica hybrid waveguide thermo–optic attenuator based on multimode interference(MMI) coupler is designed and fabricated to operate at 650 nm. The single-mode transmission condition, MMI coupler, and transition taper dimensions are optimized through the beam propagation method. Thermal analysis based on material properties provides the optimized heater placement angle. The fabricated VOA presents an attenuation of 26.5 dB with a 21-mW electrical input power at 650 nm. The rise time and fall time are 51.99 and 192 μs, respectively. The time–stability measurement results prove its working reliability.     

Optimized growth and dielectric properties of barium titanate thin films on polycrystalline Ni foils

Barium titanate(BTO) thin films were deposited on polycrystalline Ni foils by using the polymer assisted deposition(PAD) technique.The growth conditions including ambient and annealing temperatures were carefully optimized based on thermal dynamic analysis to control the oxidation processing and interdiffusion.Crystal structures,surface morphologies,and dielectric performance were examined and compared for BTO thin films annealed under different temperatures.Correlations between the fabrication conditions,microstructures,and dielectric properties were discussed.BTO thin films fabricated under the optimized conditions show good crystalline structure and promising dielectric properties with εr～ 400 and tan δ < 0.025 at 100 kHz.The data demonstrate that BTO films grown on polycrystalline Ni substrates by PAD are promising in device applications.     

Combined effect of demagnetizing field and induced magnetic anisotropy on the magnetic properties of manganese-zinc ferrite composites

This work is devoted to the analysis of factors responsible for the high-frequency shift of the complex permeability (μ^?) dispersion region in polymer composites of manganese-zinc (MnZn) ferrite, as well as to the increase in their thermomagnetic stability. The magnetic spectra of the ferrite and its composites with polyurethane (MnZn-PU) and polyaniline (MnZn-PANI) are measured in the frequency range from 1 MHz to 3 GHz in a longitudinal magnetization field of up to 700 Ое and in the temperature interval from −20 °С to +150 °С. The approximation of the magnetic spectra by a model, which takes into account the role of domain wall motion and magnetization rotation, allows one to determine the specific contribution of resonance processes associated with domain wall motion and the natural ferromagnetic resonance to the μ^?. It is established that, at high frequencies, the μ^? of the MnZn ferrite is determined solely by magnetization rotation, which occurs in the region of natural ferromagnetic resonance when the ferrite is in the “single domain” state. In the polymer composites of the MnZn ferrite, the high-frequency permeability is also determined mainly by the magnetization rotation; however, up to high values of magnetizing fields, there is a contribution of domain wall motion, thus the “single domain” state in ferrite is not reached. The frequency and temperature dependence of μ^? in polymer composites are governed by demagnetizing field and the induced magnetic anisotropy. The contribution of the induced magnetic anisotropy is crucial for MnZn-PANI. It is attributed to the elastic stresses that arise due to the domain wall pinning by a polyaniline film adsorbed on the surface of the ferrite during in-situ polymerization.     

小波图像融合在太赫兹无损检测中的应用

玻璃纤维增强复合材料被广泛应用于航天、航空及其他军民各领域,它在制备和使用过程中通常会出现多个缺陷。太赫兹时域光谱成像技术有望成为玻璃纤维增强复合材料无损检测的有力补充手段。在太赫兹时域光谱成像过程中,可以选取时域或频域波形中的不同参数来进行成像。对于不同的缺陷,能够有效地对其进行检测的参数是不一样的。采用基于小波分解的图像融合方法将多幅不同参数获取的太赫兹反射图像结合起来,得到一幅包含所有缺陷信息的新图像。研究表明,基于小波分解的图像融合方法在太赫兹无损检测中的应用,能够获取单一参数成像无法检测的缺陷信息,为复合材料太赫兹图像后期处理提供了新的技术方法。     

Intracellular triggered release of DNA-quaternary ammonium polyplex by ultrasound

2-Methacryloyloxy ethyl trimethyl ammonium chloride (TMA) is a potent polymeric plasma DNA (pDNA) carrier. The present study shows that TMA/pDNA polyplexes could be internalized into cells efficiently, but could not mediate gene transfection on its own. The transfection process of TMA/pDNA polyplexes is turned on only when ultrasound (US) was applied 4–8 h after incubating TMA/pDNA polyplexes with target cells (with a gene expression 1000 times that of the immediate US group). US is a widely used physical method for gene delivery; its transfection efficiency can be significantly enhanced when combined with cationic polymer vectors. Traditionally, US is given simultaneously with genetic materials, carriers and microbubbles to exert maximal efficacy. The unique on-off phenomenon of TMA/pDNA polyplexes, controlled by US exposure, was found to relate to the endosomal escape effect of US since the polyplexes colocalized well with the lysosome marker if no US was given or was given at inappropriate times. The proposed delivery system using US and TMA carriers has potential in many pharmaceutical applications requiring precise temporal and spatial release control.