X射线衍射光谱和X光电子能谱研究直接甲醇燃料电池阳极催化剂

利用Ｘ射线衍射光谱和Ｘ光电子能谱研究了甲醇电催化氧化的Ｐｔ－Ｍｏ／Ｃ催化剂,发现该内化剂主要以０价态的Ｐｔ和氧化态的Ｍｏ存在,分析了甲醇在该催化剂的活化机理。     

High mobility In2O3:H transparent conductive oxides prepared by atomic layer deposition and solid phase crystallization

The preparation of high‐quality In₂O₃:H, as transparent conductive oxide (TCO), is demonstrated at low temperatures. Amorphous In₂O₃:H films were deposited by atomic layer deposition at 100 °C, after which they underwent solid phase crystallization by a short anneal at 200 °C. TEM analysis has shown that this approach can yield films with a lateral grain size of a few hundred nm, resulting in electron mobility values as high as 138 cm²/V s at a device‐relevant carrier density of 1.8 × 10²⁰ cm^–3. Due to the extremely high electron mobility, the crystallized films simultaneously exhibit a very low resistivity (0.27 mΩ cm) and a negligible free carrier absorption. In conjunction with the low temperature processing, this renders these films ideal candidates for front TCO layers in for example silicon heterojunction solar cells and other sensitive optoelectronic applications. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Acoustic-based damage detection method

Most of the structural health monitoring (SHM) methods is either based on vibration-based and contact acoustic emission (AE) techniques. Both vibration-based and acoustic emission techniques require attaching transducers to structure. In many applications, such as those involving hot structural materials for thermal protection purposes or in rotating machines, non-contact measurements would be preferred because the operating environment is prohibitive leading to potential damage in contact sensors or their attachments. In this paper, a new non-contact, acoustic-based damage detection method is proposed and tested with an objective that the proposed method is able to detect the location and extend of damage accurately. The proposed acoustic-based damage detection method is a direct method. In this proposed method, changes in vibro-acoustics flexibility matrices of the damage and health structure are used to predict the location and extend of damage in the structure. A case study involving actual measured date for the case of a fixed–fixed plate structure is used to evaluate the effectiveness of the proposed method. The results have shown that the proposed acoustic-based damage detection method can be used to detect the location and extend of the damage accurately.     

1.2 kW C波段固态高效率GaN微波源研制

针对传统大功率Si,GaAs固态微波源效率低和高温度性能差的不足,采用导热系数优良的宽禁带GaN单元功放模块集成、低损耗同轴波导径向空间功率合成方法,研制出一种1.2 kW全固态C波段高效率宽禁带GaN微波源。实验结果表明：该方法实现了大功率固态微波源高效率及连续长时间高温风冷散热运行,系统安全可靠。单路功放模块集成6位移相器,移相精度5.6,增益35 dB,输出功率大于31 W。系统连续波输出功率1.2 kW ,总效率30%,谐波抑制-54.8 dBc;杂散-63.69 dBc,相位噪声-94.03 dBc/Hz@1kHz。     

Multichannel sampling theorem for bandpass signals in the linear canonical transform domain

The linear canonical transform (LCT) describes the effect of first-order quadratic phase optical system on a wave field. The classical multichannel sampling theorem for common bandlimited signals has been extended differently to bandlimited signals associated with LCT. However, a practical issue associated with the reconstruction of the original bandpass signal from multichannel samples in LCT domain still remains unresolved. The purpose of this paper is to introduce a practical multichannel sampling theorem for bandpass signals in LCT domain. The sampling expansion which is constructed by the ordinary convolution in the time domain can reduce the effect of spectral leakage and is easy to implement. The classical multichannel sampling theorem and the well-known sampling theorems for the LCT are shown to be special cases of it. Some potential applications of the multichannel sampling are also presented to show the advantage of the theory.     

Structure and Properties of Ultradrawn Polylactide/Thermoplastic Polyurethane Elastomer Blends

Highly oriented self-reinforced 80/20 blends of polylactide (PLA)/thermoplastic polyurethane elastomer (TPU) were successfully fabricated through solid hot stretching technology. Different from the isotropic sample, stress rose rapidly in a low strain region, and exhibited strain hardening for the drawn samples of the PLA/TPU blend. Superior mechanical properties of the blend, with the notched Charpy impact strength 150 KJ/m², and tensile strength 197 MPa, were achieved. With increasing hot stretch ratio, the storage modulus increased, the glass transition temperatures of the PLA-rich phase and TPU-rich phase in the blends moved to higher temperatures, and the melting temperature and crystallinity of the blend increased, indicating the stress-induced crystallization of the blend during drawing. The longitudinal fracture surfaces of the blends at different stretch ratios exhibited orderly arranged fibrillar bundle structure, which contributed to the significantly higher strength and toughness of the blend.     

高平均功率电光开关晶体热畸变分析

 深入分析了方板构型的电光开关晶体在高功率载荷条件下的热畸变行为,讨论了光强分布对热效应的影响。以KDP晶体为例,分别计算了激光束光强为高斯分布和均匀分布时晶体的温升、相应的热应力分布、波前畸变以及热退偏。结果表明,光强的分布形式对波前畸变和热退偏的影响是不同的。相对于光强均匀分布的激光束,高斯光束减缓了光斑边沿处的温度梯度,产生的热应力较小,因此可以减弱热退偏效应;另一方面,在光束口径范围内,高斯光束产生了附加的温度分布非均匀性,因而波前畸变会大一些。     

The growth and modification of materials via ion–surface processing

A wide variety of gas phase ions with kinetic energies from 1–10⁷ eV increasingly are being used for the growth and modification of state-of-the-art material interfaces. Ions can be used to deposit thin films; expose fresh interfaces by sputtering; grow mixed interface layers from ions, ambient neutrals, and/or surface atoms; modify the phases of interfaces; dope trace elements into interface regions; impart specific chemical functionalities to a surface; toughen materials; and create micron- and nanometer-scale interface structures. Several examples are developed which demonstrate the variety of technologically important interface modification that is possible with gas phase ions. These examples have been selected to demonstrate how the choice of the ion and its kinetic energy controls modification and deposition for several different materials. Examples are drawn from experiments, computer simulations, fundamental research, and active technological applications. Finally, a list of research areas is provided for which ion–surface modification promises considerable scientific and technological advances in the new millennium.     

Neutral Community Theory: How Stochasticity and Dispersal-Limitation Can Explain Species Coexistence

Neutral community theory explains biodiversity, i.e. the coexistence of several species, as the result of a stochastic balance between immigration and extinction on a local level, and between speciation and extinction on a regional level. The most popular model, presented by Hubbell in 2001, has seen many analytical developments in recent years, which can be used in model analysis, model testing and model comparison. We review these developments here, and present alternative derivations and shine previously unnoticed lights on them.     

新生MnO2对直接耐晒蓝脱色的分光光度研究

本文研究了用新生MnO2作吸剂，对水中直接耐晒蓝（B2RL）染料进行脱色的特性，探讨了影响吸附的因素，并给出适宜的吸附条件，在本试验条件下可使B2RL脱色主达95％。