Surface Modification of GTA Crosslinked Collagen‐based Composite Scaffolds with Low Temperature Plasma Technology

In this study for preparing the better performance scaffold materials for peripheral nerve repairing, the collagen‐based composite scaffolds are crosslinked with glutaraldehyde and their structure and performance are investigated. The results of FTIR indicated that the collagen and chitosan are certainly crosslinked through GTA without any significant change in the chemical property. It was observed under a scanning electron microscope (SEM) that the crosslinked collagen‐based composite scaffolds had a porous three‐dimensional cross‐linked structure. The experiments showed that the biostability of the scaffold is greatly enhanced, but the GTA crosslinking induces the potential cytotoxicity and poor hydrophilic nature. To overcome these disadvantages, the low temperature plasma technology is utilized to modify the surface of the cross‐linked collagen‐based composite scaffolds in this study. Measurements of water contact angle showed that hydrophilic nature of surface of the scaffolds was improved after low temperature plasma technology modification. The cell proliferation experiments revealed that the modified collagen‐based composite scaffolds still kept their bioactivity and benefited the proliferation.     

Nanoparticle nucleation and coagulation in a mixing layer

Numerical simulation of nanoparticle nucleation and coagulation in a mixing layer with sulfuric acid vapor binary system is performed using the large eddy simulation and the direct quadrature method of moment. The distributions of number concentration, volume concentration, and average diameter of nanoparticles are obtained. The results show that the coherent structures have an important effect on the distributions of number concentration, volume concentration and average diameter of nanoparticles via continuously transporting and diffusing the nanoparticles to the area of low particle concentration. In the streamwise direction, the number concentration of nanoparticles decreases, while the volume concentration and the average diameter increase. The distributions of number concentration, volume concentration and average diameter of nanoparticles are spatially inhomogeneous. The characteristic time of nucleation is shorter than that of coagulation. The nucleation takes place more easily in the area of low temperature because where the number concentration of nanoparticles is high, while the intensity of coagulation is mainly affected by the number concentration. Both nucleation and coagulation result in the variation of average diameter of nanoparticles.     

聚丙烯微孔膜的等离子体接枝聚合改性

利用拉伸时的晶型转变致孔特性,从β晶相聚丙烯经单向或双向拉伸制得了新型聚丙烯微孔膜、用等离子体接枝聚合技术接上了亲水性聚合物如聚丙烯酸、聚丙烯腈等。研究了等离子体处理时间、单体性质对得到的亲水膜的亲水性、离子/溶质渗透性的影响。发现接枝聚丙烯酸的双向拉伸膜对Na~+、Mg~(++),尿素有较大的渗透性,并具有优良的形状稳定性。     

Theoretical analysis of the performance of a model supercapacitor consisting of metal oxide nano-particles

The factors influencing the electrochemical behaviour of a supercapacitor have been partly examined in this work. The effects of so-called intrinsic parameters, i.e. exchange current density, unit cell length and double layer (DL) capacitance; as well as the so-called application parameters, i.e. cell current, on the cell potential discharge time have been considered. The contributions of each type of capacitors, DL capacitor and faradaic supercapacitor under various states of operation and material have been analyzed, and the competing (compensating) effects of the two types of capacitors as regards to the discharge and power characteristics manifested by current–potential and energy–power (Ragone plots) are elucidated.     

X-ray photoelectron spectroscopy characterization of oxidated Si particles formed by pulsed ion-beam ablation

X-ray photoelectron spectroscopy (XPS) is used to probe oxidation states of Si species in particles deposited using a pulsed ion-beam evaporation method. The effects of He ambient gas, ion beam intensity and post-treatments on the oxides composition and oxygen content have been studied. It is found that presence of He ambient gas led to a profound oxidation of Si species as compared to that prepared in vacuum at the same ion-beam ablation energy, i.e. both increase of SiO₂ component and oxygen concentration in the oxides coverage. The deposition in He also resulted in an increase of oxygen concentration even under lower ablation intensity, but a higher Si suboxides concentration. It is revealed that the reaction between Si and O was controlled by the ion beam intensity (temperature of Si plasma) and the gas ambient (collision probability of Si and O species). The difference in structure of oxide layers for samples obtained under various conditions is discussed based on the results of XPS analyses.     

Z箍缩丝阵负载区域的似稳态磁场分布

 将负载区域的电流（丝阵电流、阴极板电流、阳极板电流和回流柱电流）离散成电流线或电流面等电流微元,根据毕奥-萨伐尔定律,计算所有电流微元在指定场点的磁场,再通过叠加给出该点的总磁场。研究结果发现:在丝阵外围区域,仅由丝阵电流所产生的磁场偏离无限长直导线磁场公式的值,但全部电流所产生的总磁场与公式给出的值很接近。同时,研究了不同负载结构参数下的磁场分布,结果表明：增加丝根数有助于减小单根丝表面的局部磁场,改善丝阵外围磁场分布的均匀性。     

三维回旋自共振微波放大器的理论计算

给出了三维回旋自共振微波放大器（ＣＡＲＭ）的电于运动方程和光场演化方程，并在忽略束流空间电荷效应的前提下，编制了单模放大器程序。利用数值模拟详细考察了电子束束流质量对微波输出功率的影响，模拟结果与实验值符合得很好。     

大气压非平衡等离子体甲烷干法重整零维数值模拟

大气压非平衡等离子体由于其独特的非平衡特性,可为甲烷和二氧化碳稳定温室气体分子活化和重整提供非热平衡和活化环境.本文采用了零维等离子体化学反应动力学模型,考虑了详细的CH₄/CO₂等离子体化学反应集,重点研究了反应气体CH₄/CO₂摩尔分数(5%—95%)对大气压非平衡等离子体甲烷干法重整制合成气和重要含氧化合物的影响.首先,给出了进料气体不同体积比时电子密度和温度随时间的演化规律,结果表明初始甲烷摩尔分数的提高有利于获得较高的电子密度和电子温度.随后,讨论了主要自由基和离子数密度在不同的甲烷摩尔分数下随着时间的变化规律,并给出了反应气体的转化率、合成气体和重要含氧化合物的选择性.此外,还明确了合成气和含氧化合物主要生成和损耗的化学反应路径,发现甲基和羟基是合成含氧化合物的关键中间体.最后,归纳总结给出了主要等离子体粒子之间的总体等离子体化学反应流程图.     

电流镜及其在多值I2L电路开关级设计中的应用

运用开关信号理论和有界算术运算理论，对电流镜的多种性质进行了讨论，并系统研究了利用电流镜实现电流信号的各种算术运算，其中倍除运算属于初次提出，最后通过N进制半加电路和N值比较电路等两个设计实例介绍了电流镜技术在I^2L电路开关级设计中的应用。     

Sensitivity of current to energy in scanning tunneling microscopy within the vacuum case

Sensitivity of the tunneling current to electron energy is calculated in the context of scanning tunneling microscopy for the vacuum case by using an appropriate parameter. In addition, a mathematical relationship between this parameter and the phase associated with the involved Schrödinger wavefunctions is obtained.