Spin Transport in a Rashba Ring-Quantum Dot System Pumped by Microwave Fields

We report a theoretical study on producing electrically spin-polarized current in the Rashba ring with parallel double dots embedded, which are subject to two time-dependent microwave fields. By means of the Keldysh Green's function method, we present an analytic result of the pumped current at adiabatic limit and demonstrate that the interplay between the quantum pumping effectand spin-dependent quantum interference can lead to an arbitrarily controllable spin-polarized current in the device. The magnitude and direction of the charge and spin current can be effectively modulated by system parameters such as the pumping phase difference, Rashba precession phase, and the dynamic phase difference of electron traveling in two arms of ring; moreover, thespin-polarization degree of the charge current can also be tuned in the range [-∞, +∞]. Our findings may shed light on the all-electric way to produce the controllable spin-polarized charge current in the field of spintronics.     

激光激发水中产生超声波的实验研究

采用压电陶瓷水听器研究了Nd：YAG脉冲激光激发水中产生瞬态超声波的特性,给出了声压信号随距离的变化关系。研究结果表明：用激光产生水下声波是完全可行的。当观测点与光击穿区的距离r远大于柱体长度时,垂直于光传播方向的激光瞬态超声波幅值与r成反比;当观测点与光击穿区的距离r很小时,垂直于光传播方向的声压幅值与产成反比。此外,当激光入射角度发生变化,超声脉冲的幅值也随之发生变化,其幅值在激光束垂直入射的时候最大。     

一个新的IEC61000-4-2标准ESD电流解析表达式

分析了两个ESD标准电流波形表达式,并提出一个新的基于脉冲函数来描述ESD标准电流的解析表达式,该表达式符合最新的标准IEC61000-4-2,在零时刻的电流及其微分部为0,且波形与实际测量波形基本吻合。     

离子通道电子束回旋脉塞的等离子体波效应

研究了离子通道回旋电子束脉塞（ICECM）中的等离子体波非线性效应。利用流体理论与自洽非线性理论方法对ICECM中等离子体波效应的微观机理进行了分析。研究发现,等离子体波加强了电子束的纵向群聚,束-波互作用的能量交换效率及系统增益得到明显提高。数值模拟计算表明,对于中等等离子体密度、1.5kA电流和1MV加速电压的电子束,系统能够获得的脉冲功率和频率分别为200MW和280GHz的毫米波束。     

利用薄膜量热计测量高功率Z箍缩软X射线总能量

介绍一种采用脉冲恒压电源驱动的镍薄膜量热计,研制了测量系统和镍薄膜探测器,对探测器的电阻 温度特性进行了实验标定,该量热计已成功应用于测量“强光一号”加速器高功率Z箍缩等离子体软X射线总能量,分析了测量不确定度。     

预脉冲对相对论磁控管工作性能的影响分析

在阐述预脉冲产生的基础上,分析了预脉冲带来的一系列影响,包括工和电压波形变化,提前生成等离子体,以及预脉冲阶段放大竞争模式等,这些影响与相对论磁控管起振工作频率相联系,从而直接造成了相对论磁控管的基本性能参数,如脉宽、工作频率及输出功率等变化。结合具体实验,对比了有、无预脉冲条件下相对论磁控管工作性能的差异,对预脉冲的影响因素与相对论磁控管性能之间的联系进行了详细的分析。     

X光Gabor波带片编码成像技术实验研究

基于星光II实验装置进行了Gabor波带片编码成像探索性实验研究。采用束匀滑光斑三倍频激光打靶,辐照专门设计的ＣＨ埋金属条靶（共两种）,产生了有明确形状、边缘清晰的等离子体。研制了专门的Gabor波带片编码相机,并利用该相机采用单张胶片对不同的靶目标在不同的深度层次上曝光的技术,获得了具有深度层次信息的三维激光等离子体编码像。利用数值重建技术对实验所获得的图像解码,最终获得了在不同深度层次上的激光等离子体信息。     

A rapid and selective HPLC‐UV method for the quantitation of efavirenz in plasma from patients on concurrent HIV/AIDS and tuberculosis treatments

Owing to heterogeneity in therapeutic response, efavirenz is of research and clinical interest. There is a need to quantitate it using noncostly and selective methods. A method for efavirenz quantitation in plasma containing HIV and tuberculosis drugs was developed. Chromatographic separation was carried out using a C₁₈ column. The mobile phase consisted of 0.1% formic acid and acetonitrile, and was pumped at a flow rate of 0.3 mL/min. Efavirenz and ritonavir (internal standard) were monitored at 247 nm. Plasma proteins were precipitated by centrifugation. The analysis time was 6 min. The response was linear (r = 0.9997). The accuracy ranged between 98 and 115% (intraday) and between 99 and 117% (interday). The precision ranged from 1.670 to 4.087% (intraday) and from 3.447 to 13.347% (interday). Recovery ranged from 98 to 132%. Stability ranged between 99 and 123%. The selectivity was proven by analysis of drugs used for the management of HIV/AIDS and tuberculosis. Plasma sample analysis showed an efavirenz retention time of 5.57 min and a peak plasma concentration of 2.4 µg/mL occurring at 2 h. This method is rapid and selective, and thus suitable for monitoring efavirenz in patients with HIV/AIDS alone or co‐infected with tuberculosis in a less resourced setting. Copyright © 2013 John Wiley & Sons, Ltd.     

Structural characteristics and residual stresses in oxide films produced on Ti by pulsed unipolar plasma electrolytic oxidation

Oxide films, 7–10 µm thick, were produced on commercially pure titanium by plasma electrolytic oxidation in a sodium orthophosphate electrolyte using a pulsed unipolar current with frequency (f) and duty cycle (δ) varying within f = 0.1–10 kHz and δ = 0.8–0.2, respectively. The coatings comprised a mixture of an amorphous phase with nanocrystalline anatase and rutile phases, where the relative rutile content range was 17–25 wt%. Incorporation of phosphorus from the electrolyte into the coating in the form of PO₂ ^–, PO₃ ^2– and PO₄ ^3–, as demonstrated by EDX and FT-IR analyses, contributed to the formation of the amorphous phase. Residual stresses associated with the crystalline coating phase constituents were evaluated using the X-ray diffraction sin² ψ method. It was found that, depending on the treatment parameters, internal direct and shear stresses in anatase ranged from–205 (±17) to–431 (±27) MPa and from–98 (±6) to–145 (±10) MPa, respectively, whereas the rutile structure is comparatively stress-free.     

Analysis of electron energy distribution function in a magnetically filtered complex plasma

The electron energy distribution function (EEDF) for a magnetically filtered dusty plasma is studied in a dusty double plasma device where the electron energy can be varied from 0.15 eV to ～ 2.8 eV and plasma density from 10 6 cm-3 to 10 9cm-3 . The characteristics of EEDF for these ranges of plasma parameters are investigated in a pristine plasma as well as in a dusty plasma. The results show that in the presence of dust, there is a drastic modification in EEDF patterns in a plasma with higher electron temperature and density than those in a low temperature and low density plasma produced by the magnetic filter.