An improved method for assay of vitamin C in fish feed and tissues

Summary A method was devised to assay four forms of vitamin C: L-ascorbic acid (AA), dehydroascorbic acid (DHA), ascorbate-2-mono- and polyphosphate (AMP, APP), as well as ascorbate-2-monosulphate (AMS), in sample series of different fish tissues and feed. Direct and indirect detection were combined. Sample extractions were carried out with 0.2 mol L⁻¹ sodium acetate buffer (pH 4.8) and extracts were deproteinized after different chemical or enzymatic reactions, with perchloric acid. The DHA was reduced to AA with dithioerythritol (DTE). Ascorbate oxidase enzyme was used for the detection of background and an acidic phosphatase enzyme for the hydrolysis of different phosphate esters. Ascorbate-2-sulphate was detected directly with help of coinjection of the compound. Chromatographic analysis was carried out with a single column isocratic reverse phase method. The mobile phase was an aqueous buffer of 0.04 M sodium-acetate, 0.05 mM EDTA, 0.5 mM tetrabutylammonium dihydrogen phosphate (TBA) adjusted to pH 3.76 with 85% H₃PO₄ and with 24 mL methanol added to 1000 mL. C-18 columns were used with 0.6 mL min⁻¹ flow rate at 23°C. The vitamin C forms were detected by UV absorption at 250 nm. The determination limit was 1.0–5.0 μg g⁻¹ in AA equivalent. The standard deviations were between 1–6% and depended on the concentrations of vitamin C forms and tissues. Recoveries were between 90–96% in samples. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997     

气相色谱法同步测定煤基油品的硫分布和沸点分布

应用火焰光度检测器与氢焰检测器偶联技术，通过对模拟蒸馏法的拓展，利用气相色谱仪同步测定了煤基油品的硫分布、沸点分布和总硫含量。结果表明：油品测定的准确性和重复性均较好，沸点分布、硫分布和总硫含量的最大相对标准偏差分别为0．47％、1．01％和2．51％。本方法需要样品量小，操作简便，比较适合于实验室煤基油品的分析研究。     

Amide interactions in chlorinated solvents

Enthalpies of solution and of transfer of amides for the solvents chloroform (CHCl₃), methylenechloride (CH₂Cl₂), carbontetrachloride (CCl₄), cyclohexane (C₆H₁₂), N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMA), and ethylacetate (EtOAc) have been used to isolate and quantify the solvation interactions of amides in chlorinated solvents. Specific interactions at the aminde carbonyl and N–H groups have been identified. An analysis of the transfer enthalpies of pyrrole and methylpyrrole from cyclohexane to the chlorinated solvents shows that specific interactions between the pyrroles and these solvents are similar in nature. A means of calculating differences in the transfers of different solutes between the same solvent pair is given.Work done at Lebanon Valley College.     

Universal system for liquid stationary phase classification on the basis of thermodynamical data

Summary Equations modifying Rohrschneider's relationship between I and thermodynamical characteristics values are derived. Polarity in chromatography is discussed as a possibility of stationary phases or absorbents to enter into intermolecular interactions and is determined on the basis of the partial molar free energies of solution (G) of six test substances. A simple method for the calculation of stationary phase polarity in terms of G from retention indices and McReynolds constants is given. Equations are presented for the calculation of stationary phase selectivity utilizing G data tabulated for selected test substances. The thermodynamical basis of selecting a reference phase for a unified system expressing the selectivity of stationary phases which can also be applied for adsorbents is suggested. The energy equivalent to an index unit, G_i.u., is discussed.     

Preparation of enol ethers by carbonyl olefination utilizing an alkoxymethyl chloride-titanocene(II) system

Aldehydes, ketones, esters and lactones are transformed into enol ethers or 1,2-dialkoxy-1-alkenes by treatment with organotitanium species prepared from alkoxymethyl chlorides and a titanocene(II) complex.     

Darstellung, 19F-NMR-spektroskopischer Nachweis und Untersuchung zur Bildung der metallgemischten Clusteranionen [(Mo6−nWnCl)F]2−, n = 0−6

Preparation, ¹⁹F NMR Spectroscopic Evidence and Study of the Formation of Metal-Mixed Cluster Anions [(Mo_6?nW_nCl )F ]^2?, n = 0?6 The complete system of metal-mixed octahedral cluster ions [(Mo_6?nW_nCl)F]^2?, n = 0?6, is prepared by tempering Mo powder with WCl₆ at 600°C. A mixture containing inclusively the geometric isomers (n = 2, 3, 4) all ten possible species is transferred into the tetra-n-butylammonium salts (TBA)₂[(Mo_6?nW_nCl)F]. In the ¹⁹F nmr spectrum the 24 expected signals are observed, assigned on the basis of their chemical shifts, multiplicities and intensities, and confirmed by a 2D-¹⁹F-¹⁹F COSY spectrum. From the integrated intensities the distribution of the different components is derived revealing a non-statistical formation, in that isomers with Mo…?Mo or W…?W atoms in trans-positions in comparision to those with mixed Mo…?W axes are favoured, and that especially the homoleptic compounds Mo₆ and W₆ are present to an over-average extent. Evaluation of ¹⁹F chemical shifts reveals that F bound to W which is in antipodal position to Mo resonates at higher field compared to F bound to W in a W…?W arrangement, caused by an increased shielding, which is synonymous to a positive antipodal-effect by Mo. Vice versa F bound to Mo with an antipodal W resonates at lower field compared with F bound to Mo in an Mo…?Mo arrangement caused by an increased deshielding and synonymous a negative antipodal-effect by W. The chemical shifts, resulting from antipodal-effects, are different for the compounds within the [(Mo_6?nW_nCl)F]^2? - system. The difference of the antipodal effect of successive substitution products results in characteristic values designated as antipodal shift constants, depending on the kind of substituents, which is valid for other cluster systems, too.     

Variational solution of the single-particle Dirac equation in the field of two nuclei using relativistically adapted Slater basis functions

A variational method for solving the time-independent single-particle Dirac equation in the Coulomb field of two nuclei is described. A minimax variational principle and basis functions that have the proper analytic behavior, i.e. behave like r ^γ,γ non-integer, in the neighborhood of a nucleus, are used. A momentum space integration scheme for computing the necessary two-center integrals is described. Results are given for a standard test problem on two nuclei with Z=90 with an internuclear separation of 2.0/Z. The results confirm those of a previous calculation [F.A. Parpia and A.K. Mohanty, Chem Phys Lett 238: 209 (1995)]. Received: 13 May 1998 / Accepted: 22 June 1998 / Published online: 28 August 1998     

A complementary and synergistic effect of Fe-Zn binary metal oxide in the process of high-temperature fuel gas desulfurization

57Fe Mossbauer spectroscopy was used to investigate the evolution of Fe-Zn binary metal oxide sorbent in the process of high-temperature fuel gas desulfurization. The results of phase analyses show that Fe-Zn binary metal oxide sorbent is rapidly reduced in hot fuel gas and decomposed to new phases of highly dispersed microcrystalline elemental iron and zinc oxide, both of which become the active desulfurization constituents. A complementary and synergistic effect between active iron acting as a high sulfur capacity constituent and active zinc oxide acting as a deep refining desulfurization constituent exists in this type of sorbent for hot fuel gas desulfurization.     

Ab initio and DFT calculations on the initial step in thiamin catalysis

The diphosphate ester (ThDP) of thiamin (vitamin B₁) is an important cofactor of enzymes within the carbohydrate metabolism. The initial reaction step shared by all ThDP-dependent enzymes is the deprotonation of the C2–H of the thiazolium ring. The replacement of the 4′-amino group by a hydroxyl one in the pyrimidine ring leads to the oxy-ThDP analogue which is known as an antagonist in thiamin catalysis.

Ab initio and DFT calculations on the MP2/6-31G* and B3LYP/6-31G* level were performed to study the proton relay function in thiamin and oxythiamin systems. Both MP2 and B3LYP calculations show significant differences of the reaction coordinate of the ylide formation in the systems. Tautomers, protonated and deprotonated species of both systems show different trends regarding their stability. The influence of correlation effects on the results is discussed by comparison with the HF-SCF/6-31G* data. Frequency calculations on the B3LYP/6-31G* level were performed to characterize the minima and transition state structures, respectively.     

The solubilization of alcohols in micellar solutions

The specific conductivities of dodecyldimethylbenzylammonium bromide (C12BBr) have been determined in aqueous butanol and aqueous benzyl alcohol solutions in the temperature range of 5-40°C. From these data the temperature dependent critical micelle concentration (cmc) was determined. The molar fraction of alcohol in the micelle was estimated using the theory suggested by Motomura et al. for surfactant binary mixtures. The thermal properties such as standard Gibbs free energy, enthalpy and entropy of solubilization of alcohols in the micelles were estimated for the phase separation model. The change in heat capacity upon solubilization of alcohol in the micelle has been estimated form the above properties. This revised version was published online in July 2006 with corrections to the Cover Date.