聚双环戊二烯反应注射成型

本文介绍了国外有关聚双环戊二烯反应注射成型的研究进展，讨论了国内进行聚双环戊二烯反应注射成型开发研究的现实意义，并对这一领域的发展进行了展望     

集成滤波器在谱图信号除噪中的应用

本文提出了一种由神经元网络与线性自适应滤波器组成的集成滤波器的实现方法，用于谱图信号除噪处理。     

Fabrication of PbTiO3 Ceramic Fibers by Sol-Gel Processing

The sol-gel processing was applied to the fabrication of PbTiO₃ fibers. Pb(CH₃COO)₂·3H₂O and Ti(OC₃H ₇ ⁱ )₄ were refluxed with stirring in 2-methoxyethanol to form Pb-methoxyethoxide and Ti-methoxyethoxide, respectively, followed by mixing with stirring in 2-methoxyethanol to form Pb−Ti double alkoxide. The hydrolysis and polycondensation reaction of this double alkoxide gave polymerized products, and as a result the viscosity of the solution increased, suggesting that linear polymers were produced through the hydrolysis and polycondensation reaction. Homogeneous PbTiO₃ gel fibers were drawn from the spinnable viscous solutions, which were wellcrystallized into perovskite type PbTiO₃ at 650°C. The heat-treated fibers were a few centimeters long and from 10 to 100 μm in diameter. The fiber was made up of extremely uniform grains. Electron diffraction revealed a preferred growth of (101) planes along the fiber axis, which might be due to the linear molecular characteristics of the alkoxide.     

铁矿粉化学热加工中亚铁含量的测定

提出了一种铁矿粉热加工生产工艺中亚铁含量测定的新方法。在氮气保护下，用盐酸溶出样中的亚铁，在硫磷混酸介质中以重铬酸钾标准溶液滴定，并对溶样条件进行了研究。该方法简单、快速、准确，已成功地应用于氧化催化法生产氧化铁中亚铁的控制分析和成品鉴定。     

High modulus polyimide/polyimide molecular composite films that utilize acetylene unit as a crosslink site

Polyimide/polyimide molecular composite (MC) films comprised of a rigid polyimide derived from biphenyltetracarboxylic dianhydride (BPDA) and p-phenylenediamine (PDA) and a flexible polyimide derived from BPDA and bis (3,3'-diaminodiphenyl) acetylene (intA) and/or oxydianiline (ODA) were prepared by blending the polyamic acid solutions in 7 : 3 weight ratio, and then imidizing the blend films. Acetylene content in the flexible polyimide backbone was controlled by the ratio of intA and ODA. Cold-drawing of the blend polyamic acid films, followed by imidization, gives high modulus polyimide/polyimide MC films. The modulus of the MC films increased almost linearly with the draw ratio, reaching 25.5 GPa for the 40% drawn film. Acetylene groups in the flexible polyimide can be thermally cured to crosslink. The onset of exotherm appeared at 340°C on DSC, reaching maximum at 398°C. After the thermal crosslinking, the MC films maintained the high modulus, though elongation became small. Taking advantage of the crosslinkable acetylene units, two MC films were laminated and processed at 400°C for 20 min under 100 kg/cm² to give a good-quality laminate film. The interface of the two films was strongly bonded through the crosslinking of acetylene groups. Laminate films maintained the high modulus afforded by the cold-drawing. © 1994 John Wiley & Sons, Inc.     

Steroid Cyclophanes as Artificial Cell-surface Receptors. Molecular Recognition and its Consequence in Signal Transduction Behavior

Steroid cyclophanes, bearing four bile acid moieties covalently placed on a tetraazaparacyclophane skeleton, were designed and synthesized as artificial cell-surface receptors. Guest-binding behavior of the steroid cyclophanes embedded in a bilayer membrane formed with a synthetic peptide lipid was clarified by means of fluorescence and circular dichroism spectroscopy. We found that the steroid cyclophane effectively bound aromatic guests in both bilayer membranes and aqueous solution. In addition, copper(II) ions acted as a guest species for the steroid cyclophane and a competitive inhibitor toward a NADH-dependent lactate dehydrogenase (LDH). On these grounds, we constituted a supramolecular assembly as an artificial signaling system in combination with the steroid cyclophane, a cationic peptide lipid, and LDH. As a consequence, the steroid cyclophane acted as an effective artificial cell-surface receptor being capable of transmitting an external signal to the enzyme in collaboration with copper(II) ions as a signal transmitter.     

分析信号处理方法的比较研究

研究了高效液相色谱－火焰原子吸收光谱联用系统分析信号处理方法，比较了各种处理方法的优缺点，用积分与适应平滑法综合处理色谱峰分析信号，不仅能有效地消除噪声，而且能使分析信号得到加强，以测定镍为例，经积分与适应平滑法综合处理后，检出限改善了２．７倍。     

Crystallization Temperature Limit of (Ba,Sr)TiO<Subscript>3</Subscript> Thin Films Prepared by a Non Oxocarbonate Phase Forming CSD Route

A new chemical solution deposition (CSD) route for the fabrication of Ba_0.7Sr_0.3TiO₃ (BST) thin films has been developed which completely prevents the formation of an intermediate oxo-carbonate phase. The latter has been reported previously by several authors to be responsible for increased crystallization temperatures. Barium and strontium diaminoethoxides were synthesized starting from pure barium and strontium metal and aminoethanol. These alkoxides were found to be readily soluble in a wide range of solvents and thus were excellent candidates for the CSD process. To prepare a stable precursor solution the aminoalkoxides were dissolved in 2-butoxyethanol and then used for the deposition of BST thin films. We conclude that the minimum crystallization temperature of 600C to be independent of the formation of the oxo-carbonate phase. DTA-TGA were performed on the precursors and their solutions to study their decomposition behaviour. All films annealed at different temperatures were physically characterized by XRD, IR, and SEM. The films prepared by this route at 650C were found to have high dielectric constant and the leakage currents were comparable to BST films prepared by normal carboxylate based routes at 750C.     

Thermal degradation of vinylidene chloride/vinyl chloride copolymers in the presence of N-substituted maleimides

As a consequence of their excellent barrier properties vinyl chloride/vinylidene chloride copolymers have long been prominent in the flexible packaging market. While these polymers possess a number of superior characteristics, they tend to undergo thermally- induced degradative dehydrochlorination at process temperatures. This degradation must be controlled to permit processing of the polymers. Three series of N-substituted maleimides (N-alkyl-, N-aralkyl, and N-aryl) have been synthesized, characterized spectroscopically, and evaluated as potential stabilizers for a standard vinyl chloride/vinylidene chloride (85 mass%) copolymer. As surface blends with the polymer, these compounds are ineffective as stabilizers. However, significant stabilization may be achieved by pretreatment of the polymer with N-substituted maleimides. The most effective stabilization of the polymer is afforded by N-aralkyl- or N-arylmaleimides, most notably, N-benzylmaleimide and N-p-methoxyphenylmaleimide.     

Fastiterative methods for least squares estimations

Least squares estimations have been used extensively in many applications, e.g. system identification and signal prediction. When the stochastic process is stationary, the least squares estimators can be found by solving a Toeplitz or near-Toeplitz matrix system depending on the knowledge of the data statistics. In this paper, we employ the preconditioned conjugate gradient method with circulant preconditioners to solve such systems. Our proposed circulant preconditioners are derived from the spectral property of the given stationary process. In the case where the spectral density functions() of the process is known, we prove that ifs() is a positive continuous function, then the spectrum of the preconditioned system will be clustered around 1 and the method converges superlinearly. However, if the statistics of the process is unknown, then we prove that with probability 1, the spectrum of the preconditioned system is still clustered around 1 provided that large data samples are taken. For finite impulse response (FIR) system identification problems, our numerical results show that annth order least squares estimator can usually be obtained inO(n logn) operations whenO(n) data samples are used. Finally, we remark that our algorithm can be modified to suit the applications of recursive least squares computations with the proper use of sliding window method arising in signal processing applications.Research supported in part by HKRGC grant no. 221600070, ONR contract no. N00014-90-J-1695 and DOE grant no. DE-FG03-87ER25037.