Temperature‐dependent local atomic structures in the traditional Fe65Ni35 Invar alloy by X‐ray fluorescence holography

Fe and Ni Kα X‐ray fluorescence holography measurements were conducted on a single crystal Fe₆₅Ni₃₅ Invar alloy at 100 and 300 K to investigate the temperature dependence of the 3‐dimensional local structures around the Fe and Ni atoms, respectively. Local structural information was obtained by detailed analyses using a L₁‐regularized linear regression for the experimental data. At 100 K, the local atomic arrangements around both the elements show fcc structures. At 300 K, however, only the image around Fe shows a bcc‐like neighboring arrangement. From these X‐ray fluorescence holography data, we propose a model that with increasing temperature, an Fe atom with the low‐spin state enters at the central position of the fcc lattice and is stabilized. And then, large angular positional fluctuations are induced for the atoms at the face‐centered positions around the central Fe atom only.     

Optical extensometer and elimination of the effect of out-of-plane motions

A novel optical extensometer is developed to estimate the local uniform strain on planar surface accurately. The proposed system consists of a shared large format lens and two image sensors, which acquire pairs of images of two isolated small regions on the object surface simultaneously. Digital image correlation (DIC) algorithm is applied to determine the relative displacement between gauge points designated on recorded pairs of images. Then local strain can be extracted after dividing the relative displacement by the scale distance. Moreover, a special experimental setup called “correction sheet” is used to eliminate the virtual strain induced by out-of-plane motions. Uni-axial tensile experiments are performed to validate the reliability and resolution of the optical extensometer, and the measurement results demonstrate that the resolution of the optical extensometer achieves 2–3 με.     

Gaussian pre-filtering for uncertainty minimization in digital image correlation using numerically-designed speckle patterns

This paper discusses the effect of pre-processing image blurring on the uncertainty of two-dimensional digital image correlation (DIC) measurements for the specific case of numerically-designed speckle patterns having particles with well-defined and consistent shape, size and spacing. Such patterns are more suitable for large measurement surfaces on large-scale specimens than traditional spray-painted random patterns without well-defined particles. The methodology consists of numerical simulations where Gaussian digital filters with varying standard deviation are applied to a reference speckle pattern. To simplify the pattern application process for large areas and increase contrast to reduce measurement uncertainty, the speckle shape, mean size and on-center spacing were selected to be representative of numerically-designed patterns that can be applied on large surfaces through different techniques (e.g., spray-painting through stencils). Such “designer patterns” are characterized by well-defined regions of non-zero frequency content and non-zero peaks, and are fundamentally different from typical spray-painted patterns whose frequency content exhibits near-zero peaks. The effect of blurring filters is examined for constant, linear, quadratic and cubic displacement fields. Maximum strains between ±250 and ±20,000 µε are simulated, thus covering a relevant range for structural materials subjected to service and ultimate stresses. The robustness of the simulation procedure is verified experimentally using a physical speckle pattern subjected to constant displacements. The stability of the relation between standard deviation of the Gaussian filter and measurement uncertainty is assessed for linear displacement fields at varying image noise levels, subset size, and frequency content of the speckle pattern. It is shown that bias error as well as measurement uncertainty are minimized through Gaussian pre-filtering. This finding does not apply to typical spray-painted patterns without well-defined particles, for which image blurring is only beneficial in reducing bias errors.     

A superhydrophobic magnetic elastomer actuator for droplet motion control

For the fast droplet transportation on an open surface, a new magnetic elastomer with a superhydrophobic surface has been developed. Because the surface is superhydrophobic, the water droplet can easily roll off on the surface. The movement of the droplet was controlled by a deliberate local deformation of the surface of the elastomer induced by magnetic actuation. The direction and speed of the droplet motion was easily controlled by changing the surface topography using magnetic force. We also demonstrate the applicability of the devices as a new type of open‐surface digital microfluidics using a simple chemical reaction. Copyright © 2013 John Wiley & Sons, Ltd.     

Kinetic study of electrochemically induced Michael reaction of1,4-dihydroxyanthraquinone with acetylacetone and benzoylacetone

The electrochemical oxidation of 1,4-dihydroxyanthraquinone has been studied in the presence of acetylacetone and benzoylacetone as nucleophiles in a mixture of ethanol/water by means of cyclic voltammetry as a diagnostic technique.The results indicate the participation of electrochemically produced anthraquinone in the Michael addition reaction with acetylacetone and benzoylacetone to form the corresponding new anthraquinone derivatives.On the basis of the EC mechanism,the observed homogeneous rate constants（kobs）of the reaction of anthraquinone with acetylacetone and benzoylacetone were estimated by comparing the experimental cyclic voltammograms with the digitally simulated results.     

Differentiating bulk nanobubbles from nanodroplets and nanoparticles

History has shown that it is not as easy as one might think to differentiate between bulk nanobubbles and nanodroplets or nanoparticles. It is generally easy to detect colloids (i.e. something that looks different, e.g. scatters light differently than its surrounding solvent), but less easy to determine the nature of these colloids. This has led to misinterpretations in the literature, where nanodroplets or nanoparticles have mistakenly been assumed to be nanobubbles. In this paper, we review a multitude of experimental methods and approaches to prove the existence of bulk nanobubbles. We conclude that combinations of optical detection with physical perturbations such as pressure or ultrasound, or phase-sensitive holographic methods are the most promising and convenient approaches.     

A realization of digital wireless transmission for MRI signals based on 802.11b

In this paper, a digital wireless transmission system based on 802.11b standard for magnetic resonance imaging (MRI) application is designed and built for the first time to eliminate the interference aroused by coil array cables. The analysis shows that the wireless receiver has a very high sensitivity to detect MRI signals. The modulation technique of differential quadrature phase shift keyed (DQPSK) can be applied to MRI data transmission with rate of 2 Mbps and bandwidth of 2 MHz. The bench test verifies that this wireless link has a dynamic range over 86 dB supporting up to 3 T MRI system data transmission. The 2D spin echo imaging of phantom is performed and the SNR of the image obtained by the wireless transmission can be comparable with that got by the coaxial cables.     

Electrical actuation of dielectric droplets by negative liquid dielectrophoresis

This paper presents an electrical actuation scheme of dielectric droplet by negative liquid dielectrophoresis. A general model of lumped parameter electromechanics for evaluating the electromechanical force acting on the droplets is established. The model reveals the influence of actuation voltage, device geometry, and dielectric parameter on the actuation force for both conductive and dielectric medium. Using this model, we compare the actuation forces for four liquid combinations in the parallel-plate geometry and predict the low voltage actuation of dielectric droplets by negative dielectrophoresis. Parallel experimental results demonstrate such electric actuation of dielectric droplets, including droplet transport, splitting, merging, and dispending. All these dielectric droplet manipulations are achieved at voltages < 100 V_rms. The frequency dependence of droplet actuation velocity in aqueous solution is discussed and the existence of surfactant molecules is believed to play an important role by realigning with the AC electric field. Finally, we present coplanar manipulation of oil and water droplets and formation of oil-in-water emulsion droplet by applying the same low voltage.     

Development of microscale pattern for digital image correlation up to 1400 °C

Speckle patterns to be used for digital image correlation (DIC) at the micrometer level up to 1400 °C were fabricated by several methods. The quality of the patterns before and after heating was evaluated in terms of the mean intensity gradient (MIG) and the speckle size distribution. The displacement accuracy in simulative translation of images showed that the MIG alone was not enough to evaluate the pattern properties; a large MIG, an even speckle size distribution, and a wide speckle size range pattern were required for a good DIC. The reaction between the patterning material and substrate, the cracking of speckles, and the plastic flow of patterning material may cause changes in the pattern morphology at high temperature. Two patterning methods, spraying a mixture of ceramics powder and binder by a fine-nozzle air brush and abrading a polished surface, yielded a small pattern with high MIG values and even size distributions that was stable at 1400 °C. The potential of the fabricated patterns was shown by measuring the coefficient of thermal expansion of polycrystalline Al₂O₃ from 800 °C to 1400 °C.     

基于瑞利-索末菲积分的大衍射角衍射光学元件设计方法

针对现有的衍射光学元件设计方法只适用于小角度衍射的情况,本文提出了一种基于瑞利-索末菲衍射积分的设计方法,可以用来设计具有大衍射角的衍射光学元件。先对目标光场进行坐标变换和强度调整,再利用改进的Gerchberg-Saxton算法优化得到衍射光学元件的相位分布。分别采用本文方法和原有的基于夫琅禾费衍射积分的方法设计衍射光学元件实现线条结构光和不同角度方框图形的光场重构,结果表明:原有的设计方法只适用于衍射角全角小于25°的情况,当衍射角大于25°时,重构光场会出现显著的枕形畸变和不均匀的强度分布。而本文方法在小角度和大角度衍射下都能重构出准确的衍射角和较为均匀的强度分布.