Towards full-resolution inline electron holography

With the availability of fast computers, inline electron holography, a technique for reconstructing both amplitude and phase of the electron wave function as scattered by the sample from a set of differently aberrated transmission electron microscopy images, is becoming increasingly quantitative. While focal series reconstruction from transmission electron microscopy images has already been practiced for at least 3 decades, existing approaches can only recover a relatively small band of spatial frequencies. Here I present a reconstruction scheme which is capable of reconstructing the electron wave function for a very large range of spatial frequencies, demonstrating its performance using simulated as well as experimental data.     

Internal inspection of semi-transparent objects by digital holographic micro-tomography

The combined use of digital holographic microscopy and computer tomography, here named digital holographic micro-tomography, is used to examine the interior of transparent channels. The proposed method is used to identify internal obstacles inside of transparent troughs having slightly different refractive index. The method is based in the acquisition of a set of digital holograms of the specimen whereas it is axially rotated from 0° to 180°. The phase differences retrieved from the obtained holograms are the inputs to a computerised axial tomography procedure. The technique has been numerically modelled in order to find the optimal tomographic conditions and also to realise the minimum difference of refractive index the method could detect. The obtained results show the feasibility of the proposed method for the non-destructive evaluation of transparent micro-objects.     

Digital photoelasticity of glass: A comprehensive review

The recent advances in digital photoelasticity have made it possible to use it conveniently for the stress analysis of articles and components made of glass. Depending on the application, the retardation levels to be measured range from a few nanometres to several thousand nanometres, which necessitates different techniques and associated equipments. This paper reviews the recent advances in the photoelasticity of glass with a focus on the techniques/methods developed in the last decade. A brief introduction to the residual stress in glass is provided initially to bring out its tensorial nature. The subsequent sections are organised thematically rather than chronologically, for better readability and easy access of information.     

Scanning schemes in white light Photoelasticity – Part I: Critical assessment of existing schemes

The use of white light based Three Fringe Photoelasticity (TFP)/RGB Photoelasticity has gained importance in the recent years. With recent advances in TFP, it is possible to resolve fringe orders upto twelve. The main advantage of this technique is that it requires only a single image for isochromatic demodulation, which makes it suitable especially for problems where recording multiple images is difficult. The accuracy of isochromatic data obtained using TFP/RGB Photoelasticity is dependent on the scanning scheme used to refine the data, which is necessary to incorporate fringe order continuity. In this paper, the existing scanning schemes are critically evaluated for their ability to scan the entire model domain, influence of seed point selection and noise propagation. The scanning schemes are assessed using four problems of increasing level of geometric complexity – Circular disc under compression (simply connected), bi-axially loaded cruciform specimen with an inclined crack, a thick ring subjected to internal pressure and a finite plate with a hole (multiply connected).     

A technique for in situ X-ray computed tomography of deformation-induced cavitation in thermoplastics

Deformation-induced cavitation influences the mechanical response of polymeric materials, but acquiring in situ measurements of the spatial evolution of cavities has typically necessitated the use of synchrotron radiation sources. The objective of this study is to develop and demonstrate a method allowing for in situ measurements of deformation-induced cavitation in axisymmetric polymer specimens, using a home-laboratory X-ray computed tomography setup. The method is demonstrated by assessing deformation-induced cavitation of mineral-filled PVC in a repeated loading-unloading experiment. A temporal resolution of about 3 s is obtained by exploiting the axisymmetry of notched round tensile specimens. The evolution of relative density was captured throughout the experiment, revealing an interplay between void nucleation and void growth. Combined with surface deformation measurements obtained by digital image correlation, the present technique yields data suitable for calibration and validation of material models.     

Resolution improvement for enhancing interference fringes of digital holograms with near infrared illuminance

A new resolution improving method of enhancing the interference stripes, which can achieve better reconstruction of the recorded object of infrared digital holography has been proposed in this paper. The experiment is conducted under near infrared illuminance. We create poor quality holograms with very low-resolution interference stripes and enhance it with our new method. The processed holograms have much higher-resolution interference stripes. This method is based on interpolation theory, and we make it works fast, stable and easy to apply. Both the forward and backward interpolation of the oriental and portrait direction of the source pixels have been calculated, and have been used to realize the final aim of resolution improvement. During the experiment, since the responsivity of the CCD is not satisfied with the illuminance laser, which is by design, we also give specific analysis on the experimental setup of our work to make sure the object information can be fully recorded by the optical setup but cannot be reconstructed because of the low-resolution and unobvious of the interference stripes. After the resolution improvement process of the original hologram, the object information can then be fully reconstructed, which is very clear in the paper. Figures and dataflow give evidence and demonstrate the good performance of our method.     

Error evaluation for Zernike polynomials fitting based phase compensation of digital holographic microscopy

Combining the experimental research with the simulation calculation, the error evaluation for Zernike polynomials fitting (ZPF) based phase compensation of digital holographic microscopy (DHM) is performed. The obtained results show that the reconstructed phase with high precision can be obtained by ZPF phase compensation algorithm. Moreover, the phase error for ZPF based phase compensation algorithm increases with both the variation of object height and object transverse area, the larger variation of object height, the larger of phase error, and the larger of object transverse area, the faster increase of RMS phase error. To decrease the error of ZPF phase compensation algorithm, it is required to ensure one of the variations of object height and object transverse area to be a small value. Importantly, the proposed method supplies a useful tool for the error evaluation of phase compensation algorithm.     

Experimental investigation of the effect of temperature on the strength of polyimide contact structures

A new photogrammetry based measurement technique for contact areas in line contact structures is developed. From the data collected by this technique, a method for measuring the contact strength of contact structures in high temperature applications is proposed. The contact strength of a line contact structure of polyimide at different temperatures is measured; the results show that the increase in temperature decreases the contact strength of the structure. The effect of temperature on the contact strength is studied by investigating the occurrence and evolution of yielding core within the structure at different temperatures. The decrease in the yield strength and elastic modulus of the polyimide material at high temperature induces core yielding at lower loads and eases the propagation of core yielding to the surface.