环路跟踪卡尔曼滤波算法的性能分析

基于卡尔曼滤波的环路跟踪算法多是通过一定仿真证明算法性能,没有系统性性能评估,难以较好指导工程应用。在原有算法基础上进行了优化,并系统性地对比分析、评估了基于卡尔曼环路滤波算法性能,以期为算法工程化提供指导。首先提出对跟踪环路反馈调整量进行预测,使之更符合系统实际,减小环路跟踪误差。而后基于卫星信号模拟器输出信号和自生产信号源,充分评估基于卡尔曼滤波环路跟踪算法的收敛时间和灵敏度。仿真结果表明,相比目前工程常用的二阶FFL辅助三阶PLL算法,基于卡尔曼滤波环路跟踪算法能够缩短环路所需稳定时间约90%,并能提升跟踪灵敏度约5 d B,有效改善弱信号场景中接收机输出信息的完好性和连续性。     

Design and characterization of guided mode resonance filters with the improved structure for facile fabrication

In this study, a guided mode resonance filter with the improved structure for facile fabrication is designed; the properties of the designed filters are simulated by rigorous coupled wave analysis. It is found that the resonance wavelength and spectral linewidth are slightly increased with the increasing of the grating thickness, and seldom changed with the thickness of the grating filling factor, as the parameter error of the grating thickness and the grating filling factor are deviated from the designed value by ±10%, respectively, which are very favorable for simplifying preparation process of the GMR filter.     

Digital photoelasticity of glass: A comprehensive review

The recent advances in digital photoelasticity have made it possible to use it conveniently for the stress analysis of articles and components made of glass. Depending on the application, the retardation levels to be measured range from a few nanometres to several thousand nanometres, which necessitates different techniques and associated equipments. This paper reviews the recent advances in the photoelasticity of glass with a focus on the techniques/methods developed in the last decade. A brief introduction to the residual stress in glass is provided initially to bring out its tensorial nature. The subsequent sections are organised thematically rather than chronologically, for better readability and easy access of information.     

Scanning schemes in white light Photoelasticity – Part I: Critical assessment of existing schemes

The use of white light based Three Fringe Photoelasticity (TFP)/RGB Photoelasticity has gained importance in the recent years. With recent advances in TFP, it is possible to resolve fringe orders upto twelve. The main advantage of this technique is that it requires only a single image for isochromatic demodulation, which makes it suitable especially for problems where recording multiple images is difficult. The accuracy of isochromatic data obtained using TFP/RGB Photoelasticity is dependent on the scanning scheme used to refine the data, which is necessary to incorporate fringe order continuity. In this paper, the existing scanning schemes are critically evaluated for their ability to scan the entire model domain, influence of seed point selection and noise propagation. The scanning schemes are assessed using four problems of increasing level of geometric complexity – Circular disc under compression (simply connected), bi-axially loaded cruciform specimen with an inclined crack, a thick ring subjected to internal pressure and a finite plate with a hole (multiply connected).     

Metabolite identification of the antimalarial piperaquine in vivo using liquid chromatography–high‐resolution mass spectrometry in combination with multiple data‐mining tools in tandem

Artemisinin‐based combination therapy is widely used for the treatment of uncomplicated Plasmodium falciparum malaria, and piperaquine (PQ) is one of important partner drugs. The pharmacokinetics of PQ is characterized by a low clearance and a large volume of distribution; however, metabolism of PQ has not been thoroughly investigated. In this work, the metabolite profiling of PQ in human and rat was studied using liquid chromatography tandem high‐resolution LTQ‐Orbitrap mass spectrometry (HRMS). The biological samples were pretreated by solid‐phase extraction. Data processes were carried out using multiple data‐mining techniques in tandem, i.e., isotope pattern filter followed by mass defect filter. A total of six metabolites (M1–M6) were identified for PQ in human (plasma and urine) and rat (plasma, urine and bile). Three reported metabolites were also found in this study, which included N‐oxidation (M1, M2) and carboxylic products (M3). The subsequent N‐oxidation of M3 resulted in a new metabolite M4 detected in urine and bile samples. A new metabolic pathway N‐dealkylation was found for PQ in human and rat, leading to two new metabolites (M5 and M6). This study demonstrated that LC‐HRMSⁿ in combination with multiple data‐mining techniques in tandem can be a valuable analytical strategy for rapid metabolite profiling of drugs. Copyright © 2016 John Wiley & Sons, Ltd.     

Chelating 2,2′-Diaminodiethylamine Cellulose Filters and X-ray Fluorescence for Preconcentration and Trace Analysis of Natural Waters

Abstract

The 2,2′-diaminodiethylamine (DEN) functional group can be expected to have ideal properties for the chelation of transition metals and their collection from aqueous solutions, independent of the alkali and alkaline earth ions concentration. Introducing DEN into cellulose filters allows straightforward preconcentration of trace cations by a simple filtration step, and the DEN-filter constitutes a suitable target for X-ray fluorescence (XRF) analysis. The linearity between the XRF-response on the loaded DEN-filter and the trace cation concentration in the solution appears excellent, up to a total filter capacity of ca. 3 μeq.cm^?2. The detection limits are around 0.5 μg. l^?1 in most practical cases. Accuracy and precision are around 10%. The applicability of the proposed procedure is illustrated on a comparative basis by XRF-analysis of drinking water and surface water, after preconcentration by DEN-filtration and by alternative procedures.     

Error evaluation for Zernike polynomials fitting based phase compensation of digital holographic microscopy

Combining the experimental research with the simulation calculation, the error evaluation for Zernike polynomials fitting (ZPF) based phase compensation of digital holographic microscopy (DHM) is performed. The obtained results show that the reconstructed phase with high precision can be obtained by ZPF phase compensation algorithm. Moreover, the phase error for ZPF based phase compensation algorithm increases with both the variation of object height and object transverse area, the larger variation of object height, the larger of phase error, and the larger of object transverse area, the faster increase of RMS phase error. To decrease the error of ZPF phase compensation algorithm, it is required to ensure one of the variations of object height and object transverse area to be a small value. Importantly, the proposed method supplies a useful tool for the error evaluation of phase compensation algorithm.     

A tunable dual-narrowband band-pass filter using plasma quantum well structure

A tunable dual-narrowband pass-band filter is designed. A one-dimensional photonic crystal(1D PC) is comprised of alternate dielectric layer and vacuum layer. Two quantum wells(QWs) as defects can be constructed by sandwiching two plasma slabs symmetrically in the 1D PC, and a dual-narrowband pass-band filter is formed. The conventional finitedifference time-domain(FDTD) method and piecewise linear current density recursive convolution(PLCDRC)–FDTD method are applied to the dielectric and plasma, respectively. The simulation results illustrate that the dual-narrowband frequencies can be tuned by changing the plasma frequency. The pass band interval and the half-power bandwidths(-3-dB band widths) are related to the space interval between two QWs.     

Experimental investigation of the effect of temperature on the strength of polyimide contact structures

A new photogrammetry based measurement technique for contact areas in line contact structures is developed. From the data collected by this technique, a method for measuring the contact strength of contact structures in high temperature applications is proposed. The contact strength of a line contact structure of polyimide at different temperatures is measured; the results show that the increase in temperature decreases the contact strength of the structure. The effect of temperature on the contact strength is studied by investigating the occurrence and evolution of yielding core within the structure at different temperatures. The decrease in the yield strength and elastic modulus of the polyimide material at high temperature induces core yielding at lower loads and eases the propagation of core yielding to the surface.     

UV filter 2‐ethylhexyl 4‐methoxycinnamate: a structure,energetic and UV–vis spectral analysis based on density functional theory

2‐Ethylhexyl 4‐methoxycinnamate (EHMC) is a very commonly used UVB filter that is known to isomerize from the (E) to the (Z) isomer in the presence of light. In this study, we have performed high level quantum chemical calculations using density functional theory (DFT) with the B3LYP density functional and extended basis sets to study the gas‐phase molecular structure of EHMC and its energetic stability. Calculations were also performed for related smaller molecules cinnamic acid and 4‐methoxycinnamic acid. Charge delocalization has been analyzed using natural charges and Wiberg bond indexes within the natural bond orbital analysis and using nucleus independent chemical shifts. Density functional theory calculations reveal that the (E) isomer of EHMC is more stable than the (Z) by about 20 kJ mol^?1 in both the gas and aqueous phases. The enthalpy of formation in the gas phase of (E)‐EHMC was derived from an isodesmic bond separation reaction. Long‐range corrected DFT calculations in implicit water were made in order to understand the excited state properties of the (E) and (Z) isomers of EHMC. Copyright © 2013 John Wiley & Sons, Ltd.