用于投影显示的分色合色膜系的消偏振设计

由于斜入射时,光学薄膜存在一定的偏振效应,将产生S-和P-偏振光的光谱分离.在Philips棱镜系统中,分色合色膜系通常分色时对S-光应用,合色时则对P-光应用.从提高光能利用率、减少杂散光和增加系统对比度等因素综合考虑,要求分色合色膜系的S-和P-偏振光的分离尽可能小.新设计方法采用宽带法布里－珀罗薄膜干涉滤光片中心波长两侧的干涉带作为长波通或短波通截止滤光片,可实现S-和P-偏振分量的分离几乎为零.     

不同层显式格式及在微尺度热传导中的应用

基于指数拟合和牛顿插值多项式构造了用于数值计算偏微分方程的不同层显式格式,应用不同层显式格式可获得不同精度的数值计算结果,并将该算法应用于微结构热传导方程和薄膜强瞬态热传导方程中．     

Capacitive sensors using electropolymerized o-phenylenediamine film doped with ion-pair complex as selective elements for the determination of pentoxyverine

A capacitive sensing method based on electropolymerized o-phenylenediamine film doped with pentoxyverine ion-pair complex as selective element was successfully developed for the determination of pentoxyverine. Ion-pair complex, pentoxyverine-tetraphenylborate or pentoxyverine-picrolonate, was embedded in electropolymerized o-phenylenediamine film by electropolymerizing technique. The effects of working frequency and test solution pH on the detection of pentoxyverine were investigated in detail and optimized. For the sensor modified with pentoxyverine-tetraphenylborate, calibration curve was linear over the concentration range of 5.0×10⁻⁷ to 1.0×10⁻⁴ M with a detection limit of 1.0×10⁻⁷ M at pH 7. The proposed sensor exhibited high selectivity and sensitivity to pentoxyverine. The results in sample analysis confirmed the usefulness of the proposed ISC sensor for quantitative analysis, and also indicated that this method might find applications in the assay of other drugs.     

Design of a Thin Film Infrared Barcode on a Flexible Substrate

We report the design, fabrication and characterization of an infrared barcode. This barcode is composed of a bilayer of titanium and amorphous silicon on a flexible Kapton substrate. Information encoded in the barcode shows high contrast when viewed with an infrared imaging system in the 8 to 12 m spectral region. The barcode information is concealed under visible viewing conditions, i.e., the barcode appears as an untreated, uniform metal sheet to a detector of visible radiation (400 to 700nm).     

Use of polyacrylamide-grafted<Emphasis Type="Italic"> Plantago psyllium</Emphasis> mucilage as a flocculant for treatment of textile wastewater

The chemical modification of Plantago psyllium mucilage (Psy), an anionic polysaccharide, was done by grafting polyacrylamide (PAM) chains to prepare a graft-copolymer (Psy-g-PAM). It was synthesized in the presence of nitrogen using ceric ammonium nitrate–nitric acid redox initiator and characterized by IR spectroscopy, scanning electron microscopy and viscosity measurements. This grafted copolymer was tested for its flocculation efficiency in textile wastewater by the standard Jar test method. The effects of polymer concentration, pH and contact time on the percentage removal of solid wastes [total dissolved solids (TDS) and suspended solids (SS)] and color from textile effluent are reported. The optimum dose was found to be 1.6 mg l^–1, at which maximum solid removal (SS and TDS) was seen. The most suitable pH for TDS and color removal was neutral (7.0) and for SS removal alkaline pH (9.2) was found to be most suitable. The optimum treatment duration for solid waste removal was 5 h. The X-ray diffraction analysis of Psy-g-PAM and solid waste before and after treatment suggests the interaction of the solid waste and Psy-g-PAM copolymer.     

Morphology of Electropolymerized Poly(N-Methylaniline) Films

The influence of polymerization conditions on the morphology of thin films of poly-(N-methylaniline) (PNMA) was studied. The films were prepared by electropolymerization on gold and platinum electrodes and studied by optical and electron microscopy. It was demonstrated that the film morphology does not depend on the polymerization rate or on the electrode metal. However, it is sensitive to the kind of counter ion of PNMA. The polymers containing acetate or chloride do not form stable films. Polymer films containing phosphate or sulfate display inhomogeneous structures. A formation of sprouts and nanotubes was observed for PNMA sulfate. The films formed by PNMA perchlorate are smooth and transparent (glass-like structure). A sublayer of 4-aminothiophenol increases the adhesion of polymers to the gold surface.     

High‐throughput characterization of pattern formation in symmetric diblock copolymer films

Surface‐pattern formation in thin block copolymer films was investigated by utilizing a high‐throughput methodology to validate the combinatorial measurement approach and to demonstrate the value of the combinatorial method for scientific investigation. We constructed measurement libraries from images of subregions of block copolymer films having gradients in film thickness and a range of molecular mass, M. A single gradient film covers a wide range of film morphologies and contains information equivalent to a large number of measurements of films having a fixed thickness, h. Notably, the scale of the surface patterns is generally much larger than the molecular dimensions so that the interpretation of the patterns is more subtle than ordering in bulk block copolymer materials, and there is no predictive theory of this type of surface‐pattern formation. We observed a succession of surface patterns that repeat across the film with increasing h [extended smooth regions, regions containing circular islands, labyrinthine (“spinodal”) patterns, holes, and smooth regions again]. The extended smooth regions and the labyrinthine patterns appear to be novel features revealed by our combinatorial study, and these patterns occurred as bands of h that were quantized by integral multiples of the bulk lamellar period, L_o. The magnitude of the height gradient influenced the width of the bands, and the smooth regions occupied an increasing fraction of the film‐surface area with an increasing film gradient. The average size of the spinodal patterns, λ, was found to scale as λ ～ L or λ ～ M^?1.65 and reached a limiting size at long annealing times. The hole and island features had a size comparable to λ, and their size likewise decreased with increasing M. The smooth regions were attributed to an increase in the surface‐chain density in the outer brushlike block copolymer layer with increasing h, and the scaling of λ with M was interpreted in terms of the increasing surface elasticity with M. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2141–2158, 2001     

Influences of Heating Condition and Substrate-Surface Roughness on the Characteristics of Sol-Gel-Derived Hydroxyapatite Coatings

A prepared transparent HA solution was coated on Ti6Al4V substrates by a spin-coating technique. The crystallization of the sol-gel-derived HA coated on the metallic substrates could be done at relatively low firing temperatures (as low as 600°C). The characteristics of the HA-coated layer were dependent on the surface roughness of substrates and heating conditions such as firing temperature, holding time, heating rate, and atmosphere. The heat treatment at a slow heating rate (<2°C/min.) and a long heating time (>10 hrs) at 600°C in air produced the uniform surface and improved the crystallinity. The HA layer coated on 20 m grit-blasted substates was more uniform and had fever cracks after firing, compared with that coated on 100 m grit-blasted rougher substrates.     

3D Large scale Marangoni convection in liquid films

We study large scale surface deformations of a liquid film unstable due to the Marangoni effect caused by external heating on a smooth and solid substrate. The work is based on the thin film equation which can be derived from the basic hydrodynamic equations. To prevent rupture, a repelling disjoining pressure is included which accounts for the stabilization of a thin precursor film and so prevents the occurrence of completely dry regions. Linear stability analysis, nonlinear stationary solutions, as well as three-dimensional time dependent numerical solutions for horizontal and inclined substrates reveal a rich scenario of possible structures for several realistic fluid parameters.