2-{[1-(3,4-Dihydroxyphenyl)methylidene]amino}benzoic acid immobilized Amberlite XAD-16 as metal extractant

2-{[1-(3,4-Dihydroxyphenyl)methylidene]amino}benzoic acid (DMABA) was loaded on Amberlite XAD-16 (AXAD-16) via azo linker and the resulting resin AXAD-16-DMABA explored for enrichment of Zn(II), Mn(II), Ni(II), Pb(II), Cd(II), Cu(II), Fe(III) and Co(II). The optimum pH values for extraction are 6.5-7.0, 5.0-6.0, 5.5-7.5, 5.0-6.5, 6.5-8.0, 5.5-7.0, 4.0-5.0 and 6.0-7.0, respectively. The sorption capacity was found between 97 and 515 μmol g⁻¹ and the preconcentration factors from 100 to 450. Tolerance limits for foreign species are reported. The kinetics of sorption is fast as t_1/2 is ≤5 min. The chelating resin can be reused for 50 cycles of sorption-desorption without any significant change (<1.5%) in the sorption capacity. The limit of detection values (blank +3 s) are 1.12, 1.38, 1.76, 0.67, 0.77, 2.52, 5.92 and 1.08 μg L⁻¹ for Zn(II), Mn(II), Ni(II), Pb(II), Cd(II), Cu(II), Fe(III) and Co(II), respectively. The enrichment on AXAD-16-DMABA coupled with monitoring by flame atomic absorption spectrometry (FAAS) is used to determine all the metal ion ions in river and synthetic water samples, Co in vitamin tablets and Zn in milk samples.     

Simultaneous determination of albumin and immunoglobulin G with fluorescence spectroscopy and multivariate calibration

A method is proposed for the simultaneous determination of albumin and immunoglobulin G (IgG1) with fluorescence spectroscopy and multivariate calibration with partial least squares regression (PLS). The influence of some instrumental parameters were investigated with two experimental designs comprising 19 and 11 experiments, respectively. The investigated parameters were excitation and emission slit, detection voltage and scan rate. When a suitable instrumental setting had been found, a minor calibration and test set were analysed and evaluated. Thereafter, a larger calibration of albumin and IgG1 was made out of 26 samples (0-42 μg ml⁻¹ albumin and 0-12.7 μg ml⁻¹ IgG1). This calibration was validated with a test set consisting of 14 samples in the same concentration range. The precision of the method was estimated by analysing two test set samples for six times each. The scan modes tested were emission scan and synchronous scan Δ60 nm. The results showed that the method could be used for determination of albumin and IgG1 (albumin, root mean square error of prediction (RMSEP) <2, relative standard error of prediction (RSEP) <6% and IgG1, RMSEP <1, RSEP <8%) in spite of the overlapping fluorescence of the two compounds. The estimated precision was relative standard deviation (R.S.D.) <1.7%. The method was finally applied for the analysis of some sample fractions from an albumin standard used in affinity chromatography.     

Lewis碱性混合萃取剂碱度的测定

提出一种利用萃取法间接测定Lewis碱性萃取剂碱度的简便方法, 选择常用的Lewis碱性萃取剂TOA/正辛醇和TRPO/煤油, 测定了其碱度, 为今后络合萃取剂的选择及其机理的研究提供理论指导.     

Square-wave voltammetric (SWV) determination of Captopril in reconstituted serum and pharmaceutical formulations

A simple, fast and sensitive square-wave voltammetric (SWV) method for the determination of trace amounts of Captopril in pharmaceutical formulation and reconstituted serum is reported. A three-electrode system containing the static mercury drop electrode (SMDE) working electrode, Pt auxiliary electrode and Ag/AgCl reference electrode was used throughout. Sodium sulfite was used as both supporting electrolyte and oxygen removing agent. No nitrogen purging is needed for oxygen removal from sample solution. Calibration graph showed good linearity in the concentration range of 0.5-50.0 μg mL⁻¹ of Captopril and regression coefficient of 0.9957 is obtained. R.S.D. for eight replicate measurements and LOD of the proposed method are 1.2% and 6.28 × 10⁻³ μg mL⁻¹, respectively. The effect of various parameters (equilibration time, scan increment, pulse height, drop size, frequency and sodium sulfite concentration) on the determination were investigated. The procedure was successfully applied to the determination of Captopril in pharmaceutical formulation and reconstituted serum.     

Surface modification by calcium ions—Effect on chromatographic properties of silica

Summary A liquid chromatographic method incorporating column-switching and fluorimetric detection for the determination of triamterene in untreated urine, is described. The urine samples (5 L) were directly introduced onto an Hypersil ODS-C18, 30 m (20 mm×2.1 mm I.D.) pre-column. Polar urinary compounds were removed by flushing the pre-column with water for 1 min, and the analyte was then switched onto an HP-LiChrospher RP C18,5 m (125 mm×4mm ID) analytical column using an acetonitrile/phosphate buffer gradient elution. Fluorescence detection was performed at 230 nm excitation and 430 nm emission wavelengths. The recovery of drug was 102±2% in the 0.10–20.0 g/mL concentration range, the limit of detection being 5 ng/mL. A validation of the usefulness of this procedure was accomplished by analysing urine extracts obtained from real samples.Hypersil ODS is not a product of Merck, Germany. Please give supplier (p. 5).     

Determination of acidic sites and binding toxic metal ions on cumin surface using nonideal competitive adsorption model

A fundamental study of the application of cumin biomass in the recovery of Cu and Zn metal ion uptake from food and drinks is carried out at different pH's and at fixed ionic strength. The chemical characteristics of protein in cumin seeds were investigated. Results showed that cumin contains 18.25% crude protein, which includes 18 amino acids. The main reactive groups on protein cumin are amino and carboxylic groups of dicarboxylic amino acids, leading to a pH-dependent charge. Therefore, the cumin surface is considered as a heterogeneous system. To describe protonation behavior in a heterogeneous cumin biomass (cumin/0.1 M NaNO(3)) system, acid-base titrations have been performed with conductometric and potentiometric titration. Measurement of the reactivity of cumin surface in the adsorption of Cu and Zn metal ions and determination of metal binding at different pH's were also carried out. To solve broad and ill-defined titration curves, a simplified version of nonideal competitive analysis (NICA) by Plette et al.) was applied. The results show that the sorption of the bivalent metal ions onto the whole surface of cumin could be attributed to a monodentate binding to one site mainly carboxylic-type site.     

The electrochemistry and determination of Ligustrazine hydrochloride

Ligustrazine is one of the active ingredients contained in Ligusticum chuanxiong Hort. (Umbelliferae), which is widely used in traditional Chinese medicine for the treatment of cardiovascular problems. In this work, the electrochemistry of Ligustrazine hydrochloride (LZC) and its determination are investigated. The detection limit is estimated to be 8.0×10^–8 M, with three linear ranges from 1.0×10^–6 to 1.0×10^–4 M, 1.0×10^–4 to 5.0×10^–4 M, and 6.5×10^–4 to 1.6×10^–3 M. The method has been proved to be highly sensitive, selective, and stable, and has been successfully applied to determining LZC in LZC injections.     

Electrochemical study of bergenin on a poly(4-(2-pyridylazo)-resorcinol) modified glassy carbon electrode and its determination in tablets and urine

A very sensitive electroanalytical method was employed to determine bergenin in phosphate buffer with a pH of 6.0, bergenin was accumulated at a 4-(2-pyridylazo)-resorcinol (PAR) polymer film modified glassy carbon electrode (GCE) surface under the condition of open-circuit. In the following anodic sweep from −0.4 to 0.8 V, bergenin adsorbed at the PAR polymer film modified electrode surface, was oxidized and yielded a sensitive oxidation peak at 0.595 V. Due to its unique structure and extraordinary properties, the PAR polymer film shows higher accumulation efficiency toward bergenin compared with a bare GCE. Hence, the amount of bergenin at the PAR polymer film modified GCE surface increases significantly, and finally the oxidation peak current improves greatly. The experimental conditions, such as supporting electrolyte, pH value, accumulation time and scan rate, were optimized for the measurement of bergenin, and a sensitive electroanalytical method was proposed for bergenin determination. The oxidation peak current varies linearly with the concentration of bergenin over the range of 2.0 × 10⁻⁷ to 1.2 × 10⁻⁵ mol/L, and the detection limit is 2.0 × 10⁻⁸ mol/L after 3 min open-circuit accumulation. The relative standard deviation of the same electrode in 10 successive scans is 1.8% for 1.0 × 10⁻⁶ mol/L bergenin and 2.1% for interelectrodes, indicating excellent reproducibility. This new method was successfully demonstrated with bergenin tablets and diluted urine.     

Determination of proteins with Alizarin Red S by Rayleigh light scattering technique

A new protein determination method by enhanced Rayleigh light scattering (RLS) technique has been developed. In acid condition (pH=3.60), RLS of 1,2-dihydroxyanthraquinone-3-sulfonate (Alizarin Red S) can be greatly enhanced by addition of proteins, resulting in two characteristic peaks, 360 and 505 nm, respectively. The new protein assay is based on the RLS enhancement and spectrum change. The optimum condition for the reaction was investigated. The linear range is 0.20-24.9 μg ml⁻¹ for BSA and 0.20-15.5 μg ml⁻¹ for HSA. The detection limits (S/N=3) are 9.59 ng ml⁻¹ for BSA and 9.51 ng ml⁻¹ for HSA. The results of determination for human serum samples were comparable to those obtained by Bradford method. The binding stoichiometry was determined.     

A rapid and sensitive method for the determination of trace proteins based on the interaction between proteins and Ponceau 4R

The interactions between proteins and Ponceau 4R (PR) in aqueous solution have been studied by the techniques of resonance light scattering (RLS) spectroscopy, the absorption spectroscopy, zeta potential assay and circular dichroism (CD) spectrum. The dry PR can assemble on the surface of protein via electrostatic and hydrophobic forces to produce an associated compound of protein-PR, this compound can enhance the RLS of protein. Based on this fact, a simple, rapid, and sensitive method has been developed for the determination of proteins at nanogram level by RLS technique with a common spectrofluorimeter. Under optimum conditions, the linear range is 0.10-39.2 μg mL⁻¹ for the determination of both bovine serum albumin (BSA) and human serum albumin (HSA). The detection limits (S/N = 3) are 6.96 ng mL⁻¹ for BSA and 5.71 ng mL⁻¹ for HSA, respectively. There is almost no interference from amino acids, most of the metal ions, and other coexistent substances. The method has been satisfactorily applied to the direct determination of the total protein in human serum.