溶剂浮选吸光光度法测定微量铂

本文应用溶剂浮选吸光光度原理,拟定了微量铂的分析方案。用CTMAB作捕收剂,捕收〔Pt(SnC1_3)5〕~(3-)离子,浮选至有机溶剂乙酸乙酯中,在398nm处用1cm的比色皿测定吸光度,可以测定ppb级的铂。富集比为40,表观摩尔吸光系数为2.6×10~5,铂的回收率接近100％。     

阻抑动力学光度法测定痕量间苯二酚

研究发现，在硫酸介质中，Ｆｅ能催化Ｈ２Ｏ２与甲基红之间的裉色反应，加入间苯二酚后，间苯二酚又能灵敏地阻抑该氧化褪色反应，同时研究了该阻抑褪色反应的动力学条件，从而建立了一种新的测定痕量间苯二酚的方法。     

胶束增溶光度法同时测定铂、铑、钯和金的研究

本文研究了贵金属Pt、Rh、Pd和Au在SnCl_2-BRB-AG-乳化剂OP离子缔合物体系中显色反应的条件,采用偏最小二乘回归法对上述体系重迭光谱进行解析及数据处理。结果表明,该体系灵敏度高,表观摩尔吸光系数可达1.74×10～6～2.47×10～6L·mol～-1·cm～-1;体系稳定性较好。应用本文方法对混合试样中Pt、Rh、Pd、Au进行同时测定,取得较满意的结果。     

Simultaneous determination of traces of heavy metals by solid-phase spectrophotometry

A coupling sensitive solid phase spectrophotometric (SPS) procedure for determination of traces of heavy metals (Me-SPS) and multicomponent analysis by multiple linear regressions (MA), a simple methodology for simultaneous determination of metals in mixtures was inaugurated. The Me-SPS procedure is based on sorption of heavy metals on PAN-resin and direct absorbance measurements of colour product Me-PAN sorbed on a solid carrier in a 1-mm cell. This methodology (Me-SPS-MA) was checked by simultaneous determination of metals in synthetic mixtures with different compositions and contents of metals important in pharmaceutical practice: Zn, Pb, Cd, Cu, Co, and Ni. Good agreement between experimental and theoretical amounts of heavy metals is obtained from the recovery test (78.3–110.0%). The proposed method enables determination of particular metal ion at the ng mL⁻¹ level and it was successfully applied to the determination impurities from heavy metal traces in pharmaceutical substances (Cu in ascorbic acid, Pb in glucose, and Zn in insulin). The proposed procedure could be possible contribution to the development of pharmacopoeial methodology for a heavy metals test.     

Spectrophotometric determination of zinc in copper-base alloys with TAN

TAN reacts with zinc(II) forming a red complex with composition 1:2 Zn(II)-TAN and absorption maximum at 582 nm. Zinc can be determined with this reagent in the presence of Triton X-100, in the pH range 6.20-8.00 with a molar absorptivity of 4.5×10⁴ l/mol/cm Beer's Law was obeyed up to least 1.55 g/ml. Copper interference was eliminated with a mixture of thiosulfate and ascorbic acid and nickel separated by precipitation with dimethylglyoxime. The proposed method was used for zinc determination in several copper-base alloys and the results of analysis in comparison with certified values indicated that the procedure was accurate and precise. A derivative procedure is also proposed, allowing zinc determination with high sensitivity (5-400 ng/ml).     

Combination of three analytical techniques for speciation of Al in environmental samples

An analytical scheme is proposed which combines three speciation techniques for determination of particular Al species in soil extracts and percolating waters. A cation-exchange fast protein liquid chromatography — inductively coupled plasma atomic emission spectrometry (FPLC-ICP-AES) procedure, a microcolumn chelating ion-exchange chromatography- atomic absorption spectrometry (MCC-ETAAS) technique and the 8-hydroxyquinoline spectrophotometric method (8HQ-spectrophotometry) were employed. The FPLC-ICP-AES procedure offers determination of Al³⁺ (retention time 4.5 min) and Al(OH)²⁺ species (retention time 4.0 min) which are separated from Al(OH)⁺ ₂ (retention time 1.5min). AlF²⁺ coelutes with Al(OH)²⁺ species, while Al(SO₄)⁺, AlF⁺ ₂ and negatively charged Al organic complexes coelute with Al(OH)⁺ ₂ species. The MCC-ETAAS technique enables determination of the sum of positively charged monomeric aqua- and hydroxy-Al species plus sulphate- and fluoro-Al complexes. Employing the 8HQ-spectrophotometry the sum of positively charged monomeric aqua- and hydroxy-Al species plus sulphato- and most of the labile organic Al species are determined. The sensitivities of these selected techniques were adequate for speciation of Al in the samples analyzed. On the basis of the specific selectivity of a particular technique various groups of Al species may be determined. Thus, the comparison of analytical data from complementary procedures provides more comprehensive information on Al species present in soil extracts and percolating waters.     

Spectrophotometric methods for the determination of labetalol hydrochloride in pure and dosage forms

Simple and sensitive Spectrophotometric methods for the determination of labetalol hydrochloride are described. The first two are based on the oxidative coupling reaction of labetalol hydrochloride withp-N,N-dimethyl-phenylenediamine dihydrochloride (method A, _max 685 nm) and 3-methyl-2-benzothiazolinone hydrazone hydrochloride (method B, _max 545 nm) in the presence of sodium hypochlorite and eerie ammonium sulphate as oxidants, respectively. The third depends on the formation of an ion-association complex of labetalol hydrochloride with suprachen violet 3B at pH 1.3, which is extracted into chloroform (method C, _max 565 nm). The methods obey Beer's law and the precision and accuracy of the methods were checked against the B.P. reference method and the relative standard deviations were in the range 0.35–0.52%. These methods are applied to the determination of labetalol in dosage forms.     

2－（5－Br－2－吡啶偶氮－5－二乙氨基）－酚与铑的显色反应的研究及应用

本文研究了２－（－５－Ｂｒ－２吡啶偶氮－５－二乙氨基）－酚与铑（Ⅲ）的显色反应。在ｐＨ为４．０的邻苯二甲酸氢钾缓冲液介质中，Ｒｈ（Ⅲ）与试剂形成稳定的橙红色络合物，其组成比为１：４，最大吸收波长为４９０ｎｍ，表现摩尔吸光系数为１．３×１０￣５Ｌ·ｍｏｌ￣（－１）·ｃｍ￣（－１）。铑含量在０～４μｇ／１０ｍＬ范围内服从比尔定律。     

偏最小二乘-速差动力学分光光度法同时测定杀虫剂残杀威和异丙威两组分

采用速差动力学分光光度法对氨基甲酸脂类杀虫剂残杀威和异丙威进行同时测定，这两种化 的能在碱性条件下水解生成酚盐，进而与对氨基苯酚及高碘酸钾的反应产物醌亚胺发生偶联反应，生成蓝色化合物。反应的速率适中，可用于动力学分析。实验采集了多个时间点下538－700nm间的动力学－吸光度数据，构成量测矩阵，并采用偏最小二乘（PLS）法对量测数据进行解析。本文还对合成样品和环境水样中的残杀威和异丙威含量进行测定，获较好的结果。     

偏最小二乘及双波长K系数光度法同时测定矿物中钛,铁

本文运用化学计量学中的偏最小二乘法及双波长Ｋ系数法实现了Ｔｉ、Ｆｅ的同时测定，方法用于铝钒土及钛铁矿中Ｔｉ、Ｆｅ同时测定，结果满意。