Surface mixed adsorption films of 2,4,6- trimethylphenol–2,4,6-trichlorophenol at aqueous solution/air interface

 The results of experimental studies of the adsorption at the solution/air interface from an aqueous mixture: 2,4,6-trimethylphenol–2,4,6-trichlorophenol are presented. The surface properties of the above-mentioned mixture were studied by surface potential and surface tension measurements. These measurements were carried out as a function of the concentration of 2,4,6-trimethylphenol aqueous solution at a constant concentration of 2,4,6-trichlorophenol. Using the results obtained and based on the Gibbs equation, Helmholtz formula and Motomura’s method the relative surface excesses of adsorbed substances, effective dipole moments, surface molar fractions of solutes and miscibility of adsorbed films were determined. Received: 7 November 1997 Accepted: 26 February 1998     

An Electrostatic Bond Energy Model for Enthalpies of Formation of Chloroalkanes in Gaseous States

An electrostatic bond energy model is formulated to fit the enthalpies of formation and dipole moments of the alkanes and chloroalkanes. In this model, the charge distributions are calculated by an electrostatic approach similar to the "MSE" method, and the enthalpy of formation of a molecule is the sum of the bond energy terms plus the electrostatic energy of the interactions between the charges on all atoms. All parameters of this model are obtained by parameterization. The calculated dipole moments for 13 chloroalkanes and enthalpies of formation for 19 alkanes and non-geminal chloroalkanes agree with the determined values very well. To calculate the enthalpies of formation of geminal chloroalkanes, a correction mainly attributed to the van der Waals interactions in the geminal substituted group, about 24 kJ/mol per pair of geminal chlorine atoms, is introduced.     

New Monte Carlo method for the self-avoiding walk

We introduce a new Monte Carlo algorithm for the self-avoiding walk (SAW), and show that it is particularly efficient in the critical region (long chains). We also introduce new and more efficient statistical techniques. We employ these methods to extract numerical estimates for the critical parameters of the SAW on the square lattice. We find=2.63820 ± 0.00004 ± 0.00030=1.352 ± 0.006 ± 0.025v=0.7590 ± 0.0062 ± 0.0042 where the first error bar represents systematic error due to corrections to scaling (subjective 95% confidence limits) and the second bar represents statistical error (classical 95% confidence limits). These results are based on SAWs of average length 166, using 340 hours CPU time on a CDC Cyber 170–730. We compare our results to previous work and indicate some directions for future research.     

INTRAPARTICLE DIFFUSION EFFECTS IN FISCHER-TROPSCH SYNTHESIS Ⅰ. MODELING OF DIFFUSION AND REACTION

IntroductionCatal}ticrcactionsaffcctcdb}'diffosionaIlimitationincatal}'stporcshavcbccnextensive1}dcaltx`ithinlit.rat.rcll~5I.Scvcraltcchniqucsonthcspccialcase0fFischcr-Tropschs}'nthcsis(FTS)t\crcapplicdtocxplorcthebchaviorofthiscatal}ticrcactionundercxpcrimcntalandopcrationaIconditionsI3~5l.It`"ouldbeofvaluctoindicatchcrcthatthcseinvcstigationsx"ercmainl}'bascdonthesimplcstkineticsofthcfirstordcrinH2proposedbyAndersonl6]attheearIystages.However-thesetboents,striCtlyspeaking,areinvalidfor…     

Synthesis and properties of p-benzoquinone-fused hexadehydro[18]annulenes

A series of hexadehydro[18]annulenes fused with different numbers of p-benzoquinone, 4-6, were synthesized by stepwise transformation of the p-dimethoxybenzene moiety of the precursor dehydroannulene 3 fused with three 3,6-dimethoxy-4,5-dimethylbenzene units at 1,2-positions into p-benzoquinone using ceric ammonium nitrate. The UV-vis spectra of compounds 4 and 5, which have both electron-donating p-dimethoxybenzene unit(s) and electron-accepting p-benzoquinone unit(s) in the π-systems, showed the maximum absorption bands bathochromically shifted in comparison with 3 having only p-dimethoxybenzene units and 6 having only p-benzoquinone units. However, the solvatochromism expected for 4 and 5 was found to be quite weak possibly because the HOMO and LUMO (B3LYP/6-31G(d)) are not localized but rather delocalized over the whole π-systems.     

Thermodynamics of hydrogen-isotope-exchange reactions. Proton solvation inn-hexanol and water

This paper reports our results for the direct experimental determination of the equilibrium constant for the hydrogen-isotope-exchange reaction, 1/2D₂(g)+HCl(hexOH)=1/2H₂(g)+DCl(hexOD), where hexOH isn-hexanol and hexOD isn-hexanol with deuterium substitution in the alcohol function. The reaction was studied in electrochemical double cells without liquid junction for which the net cell reaction is the above isotope-exchange reaction. The experimentally determined value of ε° (296.0°K) for this cell is 4.03±0.95 mV (strong electrolyte standard states, mole-fraction composition scale); the value of the equilibrium constant for the reaction is 1.17±0.05. The contributions of isotope-exchange and transfer effects to the magnitude of the standard Gibbs energy change for the above reaction and for the analogous reaction 1/2D₂(g)+HCl(aq)=DCl(daq)+1/2H₂(g) are considered. Our results support the conclusion of Heinzinger and Weston that the formulation of the solvated proton in water as H₃O⁺, as opposed to H₉O₄ ⁺, is sufficient for the interpretation of the thermodynamics of hydrogen-isotope-exchange reactions in water. We also find that the formulation of the solvated proton inn-hexanol as ROH ₂ ⁺ is sufficient for the interpretation of our results on the thermodynamics of hydrogen-isotope-exchange inn-hexanol.     

Dispersion state of CuO on CeO2

XRD and XPS are used to study the dispersion state of CuO on ceria surface. The dispersion capacity values of CuO measured by the two methods are consistent, which are of 1.20 mmol CuO/100 m² CeO₂. In addition, the results reveal that highly dispersed Cu²⁺ ions are formed at low CuO loadings and that increasing the CuO content to a value higher than its dispersion capacity produces crystalline CuO after the surface vacant sites on CeO₂ are filled. The atomic composition of the outermost layer of the CuO/CeO₂ samples has been probed by using static secondary ion mass spectroscopy (SSIMS), and the ratim of Cu/Ce are found to be 0.93 and 0.46 for the 1.22 and 0.61 mmol CuO/CeO₂ samples respectively. Temperature-programmed reduction (TPR) profile with two reduction peaks at 156 and 165°C suggests that the reduction of highly dispersed Cu²⁺ ions consists of two steps and is easier than that of CuO crystallites, in which the TPR profile has only one reduction peak at about 249°C. The above experimental results are in good agreement with the prediction of the incorporation model. Project supported by the National Natural Science Foundation of China.     

Retention of ionizable compounds on HPLC. Modelling retention for neutral and ionizable compounds by linear solvation energy relationships

Summary A global LSER model that relates HPLC retention to mobile phase composition and pH is tested for a varied group of solutes, both neutral and ionizable, in a polymeric column and methanol-water mobile phases. It is compared to the local LSER model developed only for a given mobile phase, i.e., a fixed organic modifier content, and to the global LSER model set only for neutral solutes. The global LSER model for neutral and ionizable solutes requires a few supplementary parameters over the other models tested, but it accounts for retention under any experimental conditions for a given column and methanol-water mobile phases, describing properly the interactions established in the HPLC system (hydrophobicity, hydrogen-bond acidity and basicity, dipolarity/polarizability…). This paper is number 13 of a series with the same general title: “Retention of Ionizable Compounds on HPLC” published in various journals.     

Cellulose: the structure slowly unravels

This article attempts to bring together basic and complex information which has been gathered on cellulose structure, principally that of native cellulose, over the last few decades. Even though advances have been made in the field of crystallography, powder crystallography cannot yield a definitive cellulose structure and single crystal diffraction is not possible due to the lack of suitable crystals. Knowledge obtained on the biosynthesis of native cellulose and on the polymorphy of cellulose and its derivatives help our understanding of ultrastructure. Many inconsistencies between early crystallographic studies of native cellulose have been clarified by the discovery that two polymorphs (α and β) of cellulose I exist. Models of the possible ultrastructural arrangements within native cellulose have been put forward over the decades; with advancement in technology, computer simulations of small and large systems are being created to test the viability of these ultrastructural models. It is hoped that this review will aid in the understanding of the complexity and uncertainties that still exist in this subject. This revised version was published online in August 2006 with corrections to the Cover Date.     

Scattering Matrix Modeling of Photon Migration in Turbid Media

Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｏｐｔｉｃａｌｔｏｍｏｇｒａｐｈｙｕｓｉｎｇｎｅａｒｉｎｆｒａｒｅｄｌｉｇｈｔｔｏｅｘｔｒａｃｔｉｎｔｅｒｉｏｒａｂｎｏｒｍａｌｉｔｉｅｓｉｎｆｏｒｍａｔｉｏｎａｔｔｒａｃｔｓｍａｎｙｒｅｓｅａｒｃｈｉｎｔｅｒｅｓｔｓｉｎｂｉｏｍｅｄｉｃａｌｏｐｔｉｃｓ［１］,ｂｅｃａｕｓｅｉｔｐｒｏｖｉｄｅｓａｎａｌｔｅｒｎａｔｉｖｅｐｏｔｅｎｔｉａｌｍｏｄａｌｉｔｙｔｏｐｒｏｂｅｂｒｅａｓｔｃａｎｃｅｒａｎｄｍｏｎｉｔｏｒｂｒａｉｎａｎｄｍｕｓｃｌｅｏｘｙｇｅｎａｔｉｏｎｎｏｎ…